How To Find Correct Replacement Grease Seal for a Trailer Axle
Updated 07/12/2021 | Published 07/09/2021 >
Question:
I have a 1992 Escort Single-Axle Boat Trailer for a Bayliner boat. My passenger side axle hub seal is leaking. Can you recommend a replacement part?
asked by: Dave C
Expert Reply:
In order to find the correct replacement grease seal for a trailer axle you have a few options. The first and easiest option would be to crawl under the trailer and read the axle capacity off the tag on the center of the beam. The part # RG06-050 for example is for 3,500 lb axles. The other option would be to pull the hubs apart and measure or read part numbers. There's a help article attached below to assist with this. I have also linked for you our entire selection of grease seals.
There is no way to look up parts for most trailers simply using the make/model.
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Search Results: trailer hubs and drums
- Search Results: shackle straps
- Search Results: trailer hubs
- Search Results: brake assemblies
- Search Results: idler hub assembly
- Search Results: idler hubs trailer axles
- Shop: Lippert Replacement Heavy-Duty Shackle Links - 3-1/8" Long - 0.5" Thick - Qty 4
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Install - 2021 Ram 2500
- Shop: Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Q&A: Does etrailer Axle with Pre Greased Hubs Require Putting More Grease In the Hub
- Shop: Lippert Spindle Nut Kit w/ Round Washer - For 2,200-lb to 4,400-lb Axles
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Best Rear Suspension Enhancement For 2020 Ram 2500 4WD With In-Bed Gooseneck Hitch
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Shop: Shackle Strap - 3-1/8" Long
- Shop: Suspension Enhancement
- Video: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal Review
- Video: Comprehensive Review: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Shop: Vehicle Engine Heaters
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Video: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles Spec Review
- Video: 3500lb Trailer Idler Hubs Direct Comparison
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Shop: Front Mount Hitch
- Shop: Base Plate for Tow Bar
- Shop: Trailer Wiring
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - DL21792 Review


