Result: l44643

Hi Pamela! Congratulations on the Kwik Kamp! I'd be happy to help you get it ready for the road. Based on the 5.70-8 tire size and 4 lug wheels you mentioned, I recommend the Kenda 5.70-8 Bias Trailer Tire with 8 Inch White Wheel, Part #AM30153.…

Hey, Jeff. Thanks for reaching out. Since your trailer has a 4 on 4 bolt pattern, there are two common bearing setups it could be using, so we’ll want to narrow that down. One option is a 1" straight spindle, which would use bearing #L44643 for…

When finding replacement wheel studs you would have to measure them with a digital caliper like The 4 inch Carbon Fiber Digital Caliper #PTW80157. I will attach a diagram with the measurements needed to get the correct wheel studs you would need.…

Hey, Harjot. It sounds like based off the measurements you got, your race most likely is part #L44610 which has a 1" inner diameter and goes on a straight spindle. The next step down from that is race part #LM11910 which is 0.75" diameter,…

Thanks for reaching out, Ron. I was able to look into your axle using the information you provided, so that definitely helped identify the right ones. For your setup, the correct Timken bearings would be #TMK44FR and #TMK34FR. Those will match up…

If the studs on your hub are drive-in studs, the most common method for removing the studs is by driving them out with a hammer. If you have a hub with an integrated drum or rotor, I recommend putting the hub flat on the ground before driving out the…

The Kodiak Disc Brake Kit #K2HR10A11RERR is actually specifically designed to fit an AL-KO 10k #99 spindle, so this will be a perfect replacement. Though this does include the oil cap, it should be noted that it does not include the bearings or seal.…

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

Hello Chris, Thanks so much for writing in and a double thank you for including the full brake assembly part number. That is incredibly helpful! Since you have the Kodiak Disc Brake Kit 11.35" Rotor #120 Spindle 12K ALKO #K2HR12A11-120DW, you…

The trailer hub part #AKIHUB-440-2-1K matches exactly what you would need. Bearings, bolt pattern and stud dimensions are the exact same.

For a 10k AL-KO trailer axle we have the Kodiak Disc Brake Kit part #K2HR10A11RERR but the #K2HR12A11-120DW that you referenced is designed for a 12k AL-KO axle.

The KH97202 caliper you have pictured can actually be the left (driver) side or the right (passenger) side. So it wasn't necessarily installed backwards and I found a couple pictures showing that they used to put that casting number on both…