Flat Towing Setup Recommendation for a 2002 Honda CR-V with Roadmaster Tracker Tow Bar

Published 03/05/2015

Products Featured in This Question

Roadmaster Tracker Tow Bar - Coupler Style for 2" Ball - 5,000 lbs

(82)

$282.20

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2166)

$575.00

Roadmaster Bulb and Socket Tail Light Wiring Kit for Towed Vehicles - Incandescent

(442)

$83.99

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(667)

$59.90

Roadmaster Even Brake Portable Flat Tow Brake System - Proportional

(57)

$1930.00

Question:

Will a Roadmaster Tracker tow bar work with a 2002 Honda CRV with the correct base plate? Thank you.

asked by: Carl W

Expert Reply:

Yes, the Roadmaster Tracker Tow Bar part # RM-020 that you referenced can be used to flat tow a 2002 Honda CR-V that has the correct Roadmaster base plate kit installed on it.

If your CR-V does not have the factory brush guard you would want the part # 1541-1, if you have the brush guard you would instead want the part # 1541-3.

For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the bulb and socket kit, # RM-155, and not have to worry about cutting and splicing into the vehicle wiring.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Even Brake proportional system, # RM-9400, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.