bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Car Hauler
  4. Enclosed Trailer
  5. Utility Trailer
  6. 4001 - 5000 lbs
etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 5,000 lbs
etrailer

etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 5,000 lbs

Part Number: e55ZV
In Stock
$219.91
Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey. Great Prices for the best trailer jack from etrailer. etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 5,000 lbs part number e55ZV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (420)
  • Q & A (0)
  • Photos

etrailer Trailer Jack - e55ZV

Highlights

  • 5,000-Lb Lift Strength: Electric drive raises heavy trailers fast and steady with 18" of travel.
  • Push-Button Ease: Quiet 12-volt motor lifts or lowers with simple on/off and extend/retract controls.
  • All-Weather Ready: Sealed buttons, rubber crank cover, and vinyl top cover block water and UV damage.
  • Built-In Safety: 20-amp auto-reset fuse guards the motor from overloads or shorts without needing spares.
  • Night-Ready Lighting: Front-facing LED brightens hookups and leveling after dark.
  • Simple Bolt-On Fit: Standard A-frame mount installs easily; drop leg adds 4-1/2" extra lift when pinned.

Features to know about

Faster Hookups: 18" Lift with Easy Drop Leg Adjustment

No more stacking blocks or cranking endlessly just to get your trailer level. The etrailer Electric Trailer Jack with an 18" lift and 5,000 lb capacity takes care of the heavy work at the press of a button. The drop leg extends up to 4-1/2" for extra height, so you can quickly go from hitching to leveling in seconds. The powered drive runs quietly and smoothly, even under load, making setup a hands-off, sweat-free process.

Smooth, Quiet Power: 12V Motor with Automatic Stop

This jack’s 12-volt motor raises and lowers your trailer smoothly and much quieter than a hand-cranked model. Reviewers noticed the near-silent operation compared to older jacks that sounded strained under load. Built-in auto stop protection prevents overextending, while a 20A automatic reset relay fuse safeguards the motor against overloads—no extra fuses to buy, no worries about burnout in the middle of a job.

Built for Real Conditions: Weatherproof Housing and Canvas Cover

Rain, road salt, or blazing sun won’t get the upper hand here. The switches are sealed under flexible rubber boots to keep water out, the crank port has a rubber cover to block moisture, and the tough black powder coat finish fights rust. A canvas cover is included to shield the top housing from UV rays when parked. Combined, these touches help the jack stay smooth-running and corrosion-free through years of use in any climate.

Simple Install, Solid Fit: Bolt-On A-Frame Mount

Installation is straightforward—just three bolts through the standard 3"-on-center A-frame mount, no drilling or modifying required. With heavy-gauge wiring and a direct 12-volt connection, most users had it running in about half an hour. The jack weighs 26 lbs and includes a manual crank for backup use. It’s practical, dependable, and a direct upgrade from most factory units.

Nighttime Convenience: LED Courtesy Light Makes Setup Easy

When daylight’s gone, the built-in LED light on the front of the jack brightens up the coupler area so you can see what you’re doing. Whether you’re setting up before sunrise or parking after dark, the light makes hitching safer and faster without fumbling for a flashlight.

Specs

Lift and Capacity

  • Lift: 18"
  • Lift capacity: 5,000 lbs

Dimensions

  • Overall height: 29-1/2"
  • Mounting plate height: 8-7/8"
  • Footplate diameter: 5-1/2"
  • Outer tube diameter: 2-1/4"

Electrical

  • Motor voltage: 12 volts

Warranty

  • Warranty: 2-Year warranty

e55ZV etrailer Electric Trailer Jack - A-Frame - 18" Lift - 5K





Customer Satisfaction Score:

Ratings & Reviews

4.7

420 reviews
Review sort icon
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.

by:

Fast delivery and very easy install. Happy with the purchase. No clearance problem putting down the tailgate.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/11/2025

That's the perfect amount of clearance, Thomas! What kind of camper are you towing?

Thomas profile picture

Thomas

4/11/2025

@GwendolynY It's a 30 ft. toyhauler


by:

Jack has performed as expected under heavy load. I use spring bars so I need jack to lift so bars can be hooked correctly.



by:

The worked great for several trips. Then it started a clicking noise every few seconds while raising the foot. I'm nervous about it failing but shipping it back is not an option. So I'll use it until it either fails or figure out why it's clicking.



by:

Everything went together great, one and only complaint is that the ground wire should be white not black. Black and red are for positive, white is for negative so now the white negative wires in the trailer box has a black wire

Brooke M. profile picture
Etrailer Expert

Brooke M.

2/14/2025

I agree! Wouldnt it be nice if all wiring trailer and towing related were standardized?? The photo looks great - thanks for sending it along!



by:

All in all, it assembled on to my travel trailer, with ease. But, then of course, I've done this a few other times. Only thing I found, not wrong, but could be an improvement, and that is the black wire was about a foot short.



by:

From the ups driver to right on my trailer. Hooked up a temp/ perm to a Milwaukee 12 AH.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

5/3/2025

The new jack looks great on your trailer, Matthew!



by:

Only took me 30 minutes to install. Works well. No more cranking to raise the tongue of my car trailer.

Donald profile picture

Donald

5/7/2026

It has worked flawlessly. It has helped mostly because my wife can raise or lower the tongue so I dont have to exit the vehicle during the hook-up process.



by:

Great jack lots of power picks up the truck and trailer much easier for distribution hitch hook up



by:

It has been installed 1 hour, so far it worked 1 time. How about allowing time to actually install the jack and use it for a bit before sending multiple emails requesting a review!

Michael profile picture

Michael

4/22/2026

Electric jack is working very well, uses very little battery capacity. Only issue is no vertical stops up or down before fuse blows. I try to watch the travel of the leg up or down trying to guess when I have gone too far trying to save the fuse. I have a package of fuses in my truck to be sure I dont get stuck somewhere. Included head cover is well made and I faithfully use it, maybe black is not the best choice for my area where it gets over 90°, 4 to 5 months a year. Overall well made and easy to install. I read other answers stating the jack has vertical stops, mine doesnt. Is it working correctly?

Jesse M. profile picture
Etrailer Expert

Jesse M.

4/22/2026

@Michael On that jack, when it reaches full extension or full retraction, it’s supposed to stall and stop without popping the fuse. The fuse is there for overload or fault protection, not normal operation. If yours is consistently blowing fuses at the top or bottom, that points to something not working correctly. A couple things I’d look at before calling it bad are making sure you’ve got a solid ground and full battery voltage, and that the jack isn’t binding or under side load. Low voltage or resistance can cause higher amp draw and pop the fuse early. But if everything checks out and it’s still blowing fuses at the ends of travel, I’d consider that a defect or internal issue with the jack, not normal behavior.


by:

The battery powered jack works great I use the trailer I put it on once a week during mowing season and it has worked each time I have pushed the button



by:

Great replacement for my 25ft travel trailer. Installation was pretty easy. Ground wire could be longer (why not same length as power wire?)



by:

The FACTORY one did not have a ground wire on it. I’ll like the fact that the replacement did the only question I have is what type of fuse should I be using on it? I noticed the original which wire in directly to the battery with no fuse, I went ahead and put a 25 amp fuse on it, but it works great.

Lazer S. profile picture
Etrailer Expert

Lazer S.

4/7/2026

Glad you like it, Thomas! This has a 20 amp auto-reset fuse built in, so you actually do not need to add a fuse to it. That said, having a 25 amp one installed isn't going to hurt anything either. What kind of trailer did you install this on?



by:

Jack worked pretty good. Install was easy like a bag to cover. Hopefully you sell future bags.



by:

Works great. Have used it for a year now. It is installed on a 2018 rockwood roo 233s there is plenty of clearance for the fold out bunk. I can also still open my tailgate with the trailer on the hitch.



by:

We have larger propane tanks so the short crank doesn't work. We used our larger crank and it cranks a lot harder than the lippert that came with the
camper. The installation was fairly easy and it came with a cover which we like. We didn't know we needed one on our first trailer jack. Figured thats what burned it out!



by:

Loved the steps taken from start to finish with the updates who had contact with the product and its journey to me which was very quick. It came well packaged and was easy to install. The jack itself is smooth and not very load even under a load unlike similar jacks from other brands. 10/10 would recommend this to friends and family.

Jake profile picture

Jake

5/9/2026

After camping just about every weekend last summer to early fall the Jack preformed just as good as day one. It survived a harsh Wisconsin winter and has been running beautifully this year as of right now. I still recommend it to those looking for new jacks.



by:

Electric jack arrived in two days. Old jack sheard so couldn’t get the trailer off the truck so the arrival of the new jack was very timely. Install was easier than expected. I’m not the most electrical savy person, but once I removed the ground to the jack there was no power so cutting and splicing in the new power went smooth. Just wish the new jack had the 12awg splices included. Would have saved me a trip to the hardware store. Would have been a real problem if I had to do this on the road.



by:

Exactly as advertised, and was easy to install. I used this to replace the old FIC one that came on the trailer and no longer worked. This e-trailer one has a thicker / sturdier base than the FIC one, and was easy to install. It came well-packaged, and in perfect condition. I like that it came with a cover, and high quality copper wires. I did have to re-use the old bolts because I have a bike rack and the bolts that came with it were too short to go through both, but that's not really an issue with the jack itself. The motor runs smoothly and the light works - I could see it in daylight when I tested it. I would definitely recommend this to others.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/23/2025

Looks great, Nick! Have you taken the camper out on a trip yet this season?

Nick profile picture

Nick

5/5/2025

@GwendolynY Not yet! Have been busy getting ready. First trip is this month, however.


by:

Just installed this on my Airstream to replace the Barker manufacturing #3500 unit which I think originally came on the trailer (m.y. 2012) and had seen some wear. My initial impression of the etrailer unit is that it’s louder than the Barker. Build quality also has a cheaper feel to it, but I was going for inexpensive. The etrailer unit is rated at #5000 so should be more than adequate. I’ll probably remove the yellow reflective “Tranformeresque” tape.
I ran into a minor issue during installation for which I will attach a couple photos The washers provided were too wide in diameter when using the stock mounting holes on the A-frame. Like probably lots of guys, after years of working on cars I practically have a hardware store in my garage and had smaller diameter washers, but I could see this being an issue if you were thinking you would just buy the jack and throw it on the trailer. Otherwise installation was a snap and I expect years of service from this jack.



by:

Just installed it. Jack went on fine, bolt holes matched my 20’ Haulmark enclosed trailer exactly. I had to run power to the battery, and that took the longest.once connected, lifted the trailer right off my floor jack. Now I just need to tuck and zip tie wires.



by:

Everything arrived on time. The packaging on the tongue jack was really good. The tongue jack installation was uneventful. Since the mounting bolts are meant for more of a tension load,I put the washers under the head which required some shaping of the washers to avoid the welds. I haven’t mounted the bumper hitch yet.



by:

Brittany was a great help to find ensure the product I selected was compatible with my trailer. We checked the stroke an capacity, discussed installation. The e trailer brand jack I chose arrived the next day, was easy to install and it worked. I'm still looking forward to using it "on the road" but have confidence there will be no issues.

Brooke M. profile picture
Etrailer Expert

Brooke M.

5/13/2025

Brittany is awesome! I'll make sure she sees your review :) I'm also confident you'll have a great experience with the jack - but we are always here if something goes awry :)

Bruce profile picture

Bruce

5/12/2026

Its still working great. Much easier than cranking it, and the light is pretty handy too.



by:

Bold holes lined up on my Winnebago Minnie 2500rl perfectly. Received unit, mid day, mounted, and did electrical all in the same day. I also like having the internal circuit breaker rather than a "burn out" fuse. Storage cover is a nice touch too.

Heather A. profile picture
Etrailer Expert

Heather A.

4/10/2026

That’s awesome to hear, and it looks like a clean install on your Minnie too. And I like that you called out the internal circuit breaker. That was a deliberate design choice to avoid the hassle of inline fuses, so it’s great to hear that’s something people actually appreciate in real use. Where are you taking the Minnie next?



by:

Jack is plenty good, seems well designed and built plus the cover actually feels heavy duty compared to others. Installed on a race trailer since we had a battery in it for the winch so why not. Welded a piece of 6" C channel into the A of the tongue close to the body so the truck tailgate would clear it. Drilled the holes out further than typical so didn't have the mounting problems others had with washers not sitting flat. The reason for the 4 stars is why in heaven's name the ground wire couldn't have been the same length as the power wire to reach a battery without soldering in an extension?!? Not a show stopper but geez- I'd have paid the extra buck for 2 more feet of wire. For anyone reading this and wondering no, I purposely did not ground the battery to the trailer, less problems going direct to the battery for high-draw stuff.

Lazer S. profile picture
Etrailer Expert

Lazer S.

4/21/2026

Glad you are liking it, James! Well, mostly anyway. I will talk to our product development guys to see what we can do about a longer ground wire. Wouldn't be a bad idea by any stretch of the meaning. What do you tow in your race trailer?

James profile picture

James

4/21/2026

@LazerS- That'd be good, If anything someone can run it somewhere protected so a chassis ground won't corrode if that's what they are using, another reason to run direct to the battery. We run at some local dirt tracks; our 14yo drives a Hornet (AKA FWD if you're not from the Midwest), fun family hobby!


by:

Installation was a breeze and so far it is working as advertised. Very happy with the product

Jeffrey profile picture

Jeffrey

4/27/2026

Trailer jack has been fantastic and works very well.


25
25

See what our Experts say about this etrailer Trailer Jack

  • Does Your etrailer Jack Automatically Stop when it is Extended so it Doesn't Over Extend?
    Hello Jeremy, Yes, our etrailer jack # e55ZV will automatically stop and not over raise. If you check out the video that I attached you will see that Steven still has his finger pushing down the button after the jack stops. What kind of application are you putting this on?
    view full answer...
  • Does Your etrailer Jack Come With a Warranty? How Long is the Warranty?
    Hello Jesus, Yes, our etrailer jack # e55ZV has a 2 year warranty. What kind of trailer will you be using this on?
    view full answer...
  • Electric A-Frame Jack for 2019 Jayco SLX 212QB
    Hi Mark; the only jack like that is the Lippert Power Stance Electric Trailer Jack # LC89VR but it exceeds the amount you're looking to spend. If you're fine with one that only runs off of the 7-way then I recommend the etrailer Electric Trailer Jack w/ 7-Way # e74GV. Most of the time people get a jack that wires directly to the trailer batteries like # e55ZV but you can really do whatever works best for you. If you're connected to the batteries you don't have to position your truck to...
    view full answer...
  • Is There a Electric Trailer Jack that is Actually Fast
    Hey Raymond, since the 5k rated etrailer jack part # e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It would still require a decent amount of time as that's the nature of these types of jacks. Now if you really want something that moves quickly we have the Phoenix jack part # UF38-944040. This will extend 6 inches with a heavy load on it in 9.5 seconds...
    view full answer...
  • Can The etrailer Electric Trailer Jack e55ZV Be Rotated To Help With Tailgate Clearance?
    Hello Bruce, yes it can. The etrailer Electric Trailer Jack # e55ZV can be rotated to the size and the bolts will still line up. We have this jack on one of our trailers here at the shop and I have checked and verified it can be rotated.
    view full answer...
  • What is the Measurement From the Mounting Plate to the Top of the Jack on the etrailer Jack 5k?
    Hello John, I was not able to find that information anywhere, luckily we have one on a trailer right outside. From the top of the mounting plate to the top of the jack is 20 1/4". What kind of trailer were you thinking about putting this on?
    view full answer...
  • Does etrailer 5K Electric A-Frame Jack Need an In-Line Fuse?
    Hey Jeffrey, thanks for reaching out! The etrailer Electric Trailer Jack # e55ZV does not require an additional fuse/relay as it has an auto-reset on built-in, and the outer diameter of the jack tube is 2-1/2". Are you looking to replace an older electric jack, or looking to upgrade from manual to electric?
    view full answer...
  • Replacement For Lippert Power Tongue jack On A Jayco Jay Flight 32BHDS
    Hi Scott, thanks for reaching out. A great replacement for the 3,500-lb Lippert jack on your Jayco 32BHDS is the etrailer Electric Trailer Jack – A-Frame – 18" Lift – 3,500 lbs # e23ZV. It’s a bolt-on swap with the same capacity, upgraded weather-resistant switches, a built-in LED light, and a manual crank backup in case you ever lose power. It also includes a vinyl cover to help keep it protected when not in use. Are you mainly looking to replace it because the old jack is getting slow...
    view full answer...
  • Electric Trailer Jack Recommendation for 2022 Shamrock Flagstaff 19
    Hey Gary, if you wanted a powered a-frame jack that works great and also doesn't break the bank we have the etrailer jack part # e55ZV. Now if you were looking for something really nice that raises and lowers in a matter of seconds the Phoenix jack part # UF38-944055 would be what you would need.
    view full answer...
  • What Is The Distance From Tube To Outer Head Of etrailer Electric Trailer Jack # e55ZV ?
    Hey there Greg! The etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 5,000 lbs # e55ZV has a measurement of 4-3/8" from the outer tube to the furthest point of the head. This tells me you should be good to go, but just barely! What happened to the old jack? Just finally gave up after so many years?
    view full answer...
  • Replacement A-Frame Jack for a 7,000 lbs Travel Trailer
    Hey Hal. To replace your 2014 Creekside 23RKS trailer's jack you'll want to go off of the tongue weight. Since your trailer has the traditional a-frame mounting bolt pattern, I recommend the etrailer Electric Trailer Jack item # e23ZV. The etrailer item # e23ZV has a 3,500 lbs capacity and has an 18" lift. The jack includes LED lights, a cover to keep it protected, and also comes with a limited lifetime warranty. In the event your trailer battery is dead there is an emergency manual crank...
    view full answer...
  • Does etrailer Powered A-Frame Jack # e55ZV Have Light for Night Cranking/Jacking
    Hey Andrew, great question but yes the etrailer Electric Trailer Jack # e55ZV that you referenced does have a really bright LED light that will make it easy to see as you are night jacking/cranking. I also think it's important to have plenty of light when you are really cranking it for safety sake. I attached a picture of the light to give you an idea how well you'd be able to see if you were doing some night cranking/jacking at your friend's campsite for example.
    view full answer...
  • Will etrailer Electric Trailer Jack e55ZV Work On 1979 Airstream Excella 500
    Hello Jorge, thanks for reaching out. The etrailer Electric Trailer Jack # e55ZV should work great on your 1979 Airstream Excella 500. It uses a standard bolt pattern (3" apart on center) so as long as you can confirm this matches the current jack, it'll work great for you. I went out to our warehouse and grabbed one of the jacks to get the measurement you asked for. I measured approximately 5-1/2" from the center of the post to the farthest point on the motor case. I edited a picture...
    view full answer...
  • Will etrailer Electric Trailer Jack e55ZV Be Compatible With A 2022 Cruiser MPG Travel Trailer?
    Hey Jason, thanks for reaching out. Yes, the etrailer Electric Trailer Jack # e55ZV is a great fit for your 2022 Cruiser MPG. Your trailer uses a standard A-frame tongue, and the # e55ZV is designed to mount directly in place of the factory jack, so from a compatibility standpoint you'll be good to go. It'll just bolt right on. Moving up from the original 2,500 lb RAM jack to a 5,000 lb model is a smart upgrade. The jack won't be lifting anywhere near its maximum capacity during normal...
    view full answer...
  • Do You Carry a Replacement Switch for You etrailer Jacks, What if Mine Goes Out?
    Hello Brian, Thank you for reaching out. While we don't offer a replacement switch for our etrailer Electric Trailer Jack - A-Frame - 18" Lift - 5,000 lbs # e55ZV, there's some good news: this jack comes with a 2 year warranty. That means if the switch were to go out in those 2years, it would be covered, because we truly stand behind the quality of our product. What kind of trailer are you putting this on?
    view full answer...
  • Electric Tongue Jack for 7,000 lb Cargo Trailer
    Hey Rick! The 5,000 lb capacity on the etrailer Electric Trailer Jack # e55ZV you were looking at would be the best option. This will keep it from struggling to lift the rear of your truck and trailer when setting up your weight distribution hitch. You also won't have to worry if you have extra gear back there in the truck bed. What do you typically haul in your cargo trailer?
    view full answer...
  • Does The etrailer Electric Trailer Jack e23ZV Have A Built In Light?
    Hey Bobby, thanks for reaching out. The etrailer Electric Trailer Jacks # e23ZV and # e55ZV do indeed have a worklight built in. Take a look at the picture below. There is not a separate wire for the light. As long as you connect the red wire to 12v power and the black wire to ground the light will operate normally. The on/off switch for the light is on the top/front of the jack housing right by the switch for operating the jack.
    view full answer...
  • Replacement Jack for Bulldog 190756
    Hey Jim! The most comparable replacement for your Bulldog 190756 would be our etrailer Electric Trailer Jack # e55ZV. This jack will lift up to 5,000 lbs, which is more than enough with your 800 lbs. tongue weight, and it gives 18" of lift, which is 3" more than your Bulldog jack. This will be your best option for an electric jack (and it will save your back as well!). What kind of race cars do you haul? How often do you haul the race car?
    view full answer...
  • Electric A-Frame Jack Recommendation for 2017 Coachman Clipper 17BH
    Hey Mike, the good news is that basically all electric a-frame jacks are made the same so any of the ones we carry like the etrailer jack part # e64GV would fit and work great. This is an entry level electric jack that will get the job done but it won't be the fastest or the quietest. On the opposite end of the spectrum we have the Phoenix part # UF38-944040 which is very fast and would raise and lower in just a matter of seconds. Somewhere in the middle we have the etrailer jack part...
    view full answer...
  • Do Battery Ring Terminal Connections Come with etrailer Electric Trailer Jack # e55ZV
    Hey Mike, I actually just came from a training earlier today on the etrailer Electric Trailer Jack # e55ZV and got to see it and use it but yes it does come with the ring terminals needed to wire in. What would you be installing this on? This is a really nice jack and for the money you cannot beat it. Anything similar is a lot more money.
    view full answer...
  • Length of Wire on etrailer Electric Trailer Jack
    Hi Richard; the wire on the etrailer Electric Trailer Jack # e55ZV is approximately 6' long. It uses 12 gauge wiring so if you need more wire you can add # 12-1-1 along with some butt connectors # DW05745-1. If you have any other questions feel free to reply below.
    view full answer...
  • What Is The Difference Between The Electric Trailer Jack e23ZV And e55ZV?
    Hey Stephany, thanks for getting in touch. The only difference between the etrailer Electric Trailer Jack # e23ZV and the # e55ZV is the weight capacity. The # e23ZV has a 3,500 lb capacity, while the # e55ZV has a 5,000 lb capacity. Because of the higher capacity, the # e55ZV does weigh about 1.5 lbs more than the # e23ZV. Aside from that they are the same 18" lift, it really just depends how much capacity you need. Comment below and let me know if you need anything else.
    view full answer...
  • Does The etrailer Electric Trailer Jack e55ZV Require Special Hardware?
    Hello Izzy, thanks for reaching out. The necessary installation hardware will be included with the etrailer Electric Trailer Jacks like parts # e55ZV and # e23ZV. You can see the hardware pictured below. It is just 3 bolts that hold the A-frame jack to the bracket. If you can remove the old jack, you will be able to bolt on the new one with no problem. Virtually all A-frame jacks use the same universal bolt pattern.
    view full answer...
  • Replacing FIC ETJ3500 Jack With etrailer Electric Trailer Jack on 2021 Jayco Jay Flight SLX 242BHS
    Hey Mike! The etrailer Electric Trailer Jack # e55ZV would be a great replacement for the jack on your 2021 Jayco Jay Flight 242BHS. This has the same lift as your existing jack but with a higher 5,000 lb capacity making it a nice upgrade. It also includes a cover to help keep it protected and a 2-year warranty. Any big trips coming up this fall with your Jayco?
    view full answer...


< Previous




Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video by:
Dustin K
Employee Daniel D
Video by:
Daniel D
Employee Steven C
Installed by:
Steven C
Employee Chris R
Video Edited:
Chris R
Employee John S
Video Edited:
John S
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Kim H
Updated by:
Kim H
Employee Shane H
Test Fit:
Shane H
Employee Bradley B
Test Fit:
Bradley B
Employee Amanda K
Written by:
Amanda K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.