Does Your etrailer Jack Come With a Warranty? How Long is the Warranty?

Updated 09/29/2025 | Published 01/22/2025

Question:

My old jack lasted a few years and I was out of luck since I bought it online at a no name place., is there a warranty on this?

asked by: Jesus

Expert Reply:

Hello Jesus,

Yes, our etrailer jack # e55ZV has a 2 year warranty.

What kind of trailer will you be using this on?

expert reply by: Kate F

Charles

1/31/2025

15 foot travel trailer 3600 pounds

Kate F.

2/3/2025

@Charles @Charles Hey Charles. If you are looking for a jack and your over all weight is 3,600 pounds the etrailer Electric Trailer Jack # e55ZV would be a little bit of an over kill. The etrailer Electric Trailer Jack - A-Frame - 18" Lift - 3,500 lbs # e23ZV would be more than enough for you. The weight is referring to the tongue weight, the tongue weight of you trailer is typically 10-15% of your overall weight which would put you at 540 pounds top. After you get things set-up please let me know how you like it. I got to go down and get my hands on one a few weeks ago, we are excited to get this jack out there.

Paul L.

9/25/2025

We have a Lance 2285 trailer. The LCI unit we have has become intermitten because the pressure switches have become spotty at best. I want to know if this unit will be capable of turing 90 degrees so I can open my tailgate. The SMART JACK I have is about an inch too close to my truck to be able to open the tailgate. Is there bolt pattern consistent with my trailer? Thanks

Kate F.

9/29/2025

@PaulL The good news is that with the A-Frame jacks the hole spacing is the same, and you don't have to mount it so it is facing forward. I wish I had the schematics to let me know if your set-up will work with clearing the tailgate, but I do not. I saw a review from a customer where he could open the tailgate with zero issues, but then there is another review stating that he could not. I went out and took a measurement for you so you can see if it will work of not, from the tube to the furthest part of the head housing is 4 1/2". I hope this helps so you can measure to see if you will have the clearance for the # e55ZV.