Safe for carbon frames and strong enough to carry your heavy bikes, this hitch bike rack will handle road bikes, mountain bikes, and anything in between. Ratcheting hooks and wheel straps hold your bikes by their wheels with no frame contact.
Features:
Specs:
Note: May interfere with bikes with front fenders.
The Yakima HoldUp is a premium, tray-style bike rack that lets you carry 2 bikes using your vehicle's hitch. This rack is specifically designed to carry bikes with big tires and wide handlebars, but it will carry just about any bike, including those with wheels from 20" to 29", carbon frames, disc brakes, thru axles, or full suspensions.
The HoldUp is easy to load, even if your bikes have monster wheels. The deep, contoured front wheel cradles accommodate just about any wheel out there, and the pivoting arms with StrongArm technology ensure that your bikes are held firmly in place.
To load a bike, simply place your front wheel in the holder, rotate the pivoting arm up and over the wheel, and press down firmly on the ratcheting hook. To release the hook, simply press the built-in red button and slide the hook up and off your wheel.
Large rear wheel holders allow the HoldUp to accommodate a wide variety of bike wheelbases. These wheel holders pivot front to back, adjusting automatically to your wheel size - no need for sliding and tightening. Secure the wheels in place with the ratcheting straps built into each holder.
Mounting bikes by the wheels helps prevent any scratches or scuffs to the paint. The ratcheting hooks are padded, however, so they won't mark your wheels. And the pivot mechanisms in the arms are overbuilt to ensure they keep functioning smoothly over a lifetime of hard use.
The wheel trays on the HoldUp are fully adjustable to ensure that you have all the space you need when mounting bikes with mammoth handlebars, such as a 29er. To adjust a wheel tray, loosen the 4 bolts where the tray attaches to the rack base and slide the tray left or right to achieve the desired spacing. Retighten the bolts and you're ready to roll with optimum handlebar clearance and no fear of bike-to-bike contact during transport.
The HoldUp has a cable lock built into the end of each pivoting arm. These cables loop through your bike frames and attach to posts on the bike rack arms to secure your bikes in place. The cables store in the arms when not in use.
The rack also has a HitchLock hitch pin that allows you to lock the rack to your vehicle. The threaded pin also works as an anti-rattle device to reduce noise and movement of the rack when it's mounted in your trailer hitch receiver.
The cable locks and HitchLock hitch pin include keyed-alike Same Key System (SKS) lock cores. These cores can be swapped out to make all your Yakima products keyed alike.
The HoldUp stores more compactly than similar platform-style racks, and features a spring-loaded pin at the base that lets you fold the rack up against the rear of your vehicle when it's not in use. First rotate the front wheel holders inward and tilt the rear wheel holders inward, then rotate the pivot arms down and use the ratcheting hooks to secure the arms to the rear wheel holders. Once the arms are in place, pull the pin and fold the rack up against your vehicle.
The same pin tilts the rack down, while fully loaded, so you can gain access to your vehicle's rear cargo area without having to unload your bikes.
California residents: click here
5 star
Do you have a question about this Hitch Bike Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.