Replacement Wheel Cup for Yakima HoldUp EVO Rear Tray

Video Transcript for The Low-Down on the Replacement Wheel Cup for Yakima HoldUp EVO Rear Tray

Hey everyone. I'm Ellen here at etrailer.com. And today we're taking a look at the replacement rear wheel cup for your Yakima HoldUp Evo bike carrier. So this is going to be a direct replacement from Yakima for that bike carrier wheel cradle to get everything back to functional again. So if something happened to that original rear wheel cup, this is going to be a piece that you would need. It does have the pivoting feature there, so you can make sure you get your spacing right for your bike.

It's also going to come with a new replacement hardware. So we get our bolts, the two washers and our lock nuts to secure that to the rest of our bike rack, as well as the Allen key or hex bolt, or. Excuse me, hex wrench, to tighten that down.On the other side, you will need a socket which will fit. Looks like about a half inch. So if you have a half inch socket that should work for that nut on the other side.It also has the 12 inch wheel straps.

So we can secure down our wheel and the mechanism to secure that as well. So should it be everything you need to replace that one component on your Evo bike rack. If you need any other components, we do have a lot of other replacement parts for the Yakima bike racks. Not just the Evo, but others as well. So if there's anything out there that you need, we definitely can get you back out on the road and enjoying your bike rack again.

That's pretty much going to do it for our look at the replacement rear wheel cup for your Yakima HoldUp Evo bike carrier. Again, that's going to work with part numbers: Y02479, Y02479-2 or Y02482. Thanks for watching and we'll see you next time.