See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

• Replacement Bearing Recommendation for Dexter 6,000 lb Axles
  We have two bearing kits that could fit for your Dexter 6,000 lb axles. The difference is the seal size. The part # BK3-100 is the kit that has the correct bearings and a seal with an inner diameter of 2.25 inches. This is most likely what you need. The other options is the part # BK3-110 which has a grease seal with an inner diameter of 2.125 inches. You would need to measure the outer diameter of the spindle your seal rides on to determine which kit you'd need.
  view full answer...
  
• Replacement Bearing Kit For Dexter 6,000 lb Axle 2266389
  Hey David, thanks for the picture. I was able to track down a spec sheet for your Dexter axle which I have included below. The 031-029-02 bearing is item # 15123 and the 031-030-02 bearing is item # 25580. For a bearing kit you can use part # BK3-110 which will come with both bearings, races, grease seal, spindle washer and cotter pin.
  view full answer...
• Replacement Bearing Kit for 5,800 lb Lippert Axle
  What is the axle capacity that you have? We don't have an easy way to look up what you have with the info you listed but if you get me the axle info I can see what you may need.
  view full answer...
• Looking for Replacement Bearing and Race Kit for 2022 Montana High Country 331RL
  Hey Mike, we have the bearing kit part # BK3-110 which comes with everything you are looking for. This comes with the correct replacement bearing and race replacements for your Dexter 6k axles as well as a new grease seal. Did you have an issue with yours or are you wanting to have a spare set on hand just in case?
  view full answer...
• Which Bearing And Seal Kit Is Needed For 2022 Cougar 368MBI Travel Trailer With Dexter 6K Axles?
  Hey there Mark! That's a great idea to stock up on some spare parts. Most people don't have the foresight like that. You will need either Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal # BK3-110 or Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal # BK3-100 depending on if you have the 2.125" or 2.250" inner diameter seal. You likely have the 2.250" I.D. seal but you'd need to check the part number or measure the seal to verify, unfortunately. The only difference in the kits is the grease...
  view full answer...
• Replacement Bearings and Seals for 2007 Montana 3700RL
  Hey Braxton! Since you have 6k axles I can tell you you either need Bearing Kit # BK3-100 (2.25" inner diameter grease seal) or # BK3-110 (2.125" ID grease seal). For the Timken you looked at it is either the # TMK42VR (2.25") or # TMK82VR (2.125"). I don't have a way to look this up using your VIN, but if you can give me the manufacturer and serial number off of your axle tag I can verify the right grease seal size. You could also pull the hubs and measure.
  view full answer...
• Looking for Replacement Bearing Kit for Hub with Bearings 15123/25580
  Hey Mark, when in doubt the correct bearing info is what is listed on the bearings that are in your hub. So if you have a # 25580 and a # 15123 that is for sure the bearings you will need as a replacement. We have these bearings in a kit with the correct size seal with the part # BK3-110.
  view full answer...
• Replacement Bearing Kit Recommendations for a 1972 Airstream Overlander
  If you have standard size axles that you are installing the Electric Trailer Brake Kit # AKEBRK-7-SA on then you can choose from the following options: 5,200 lb Axle - Kit # BK3-310 (Grease Seal 2.125" ID) or Kit # BK3-300 (Grease Seal 2.250" ID) 6,000 lb Axle - Kit # BK3-110 (Grease Seal 2.125" ID) or Kit # BK3-100 (Grease Seal 2.250" ID) 7,200 lb Axle - Kit # BK3-210 (Grease Seal 2.125" ID) or Kit # BK3-200 (Grease Seal 2.250" ID) Since you do have an older Airstream Overlander you...
  view full answer...
  
• Looking For Wheel Bearing And Seal Kit For 2024 Brinkley Z2900 With Lippert 7K Axles
  Hello Darren, thanks for reaching out. The Lippert 7K axles use a standard bearing combination but there are two possible seal sizes. We have two bearing kits for the Lippert 7K axles part # BK3-100 and the part # BK3-110. The difference is the inner diameter of the grease seal. The part # BK3-100 comes with seal that has inner diameter of 2.25 inches and the part # BK3-110 comes with seal that is 2.125 inches. I do suggest that you remove a hub and measure the ID of the seal or measure...
  view full answer...
• How to Determine the Correct Replacement Bearings for a Trailer
  To find the correct replacement bearings for your trailer, you will need to find the numbers stamped on the bearings themselves. These numbers are an industry standard regardless of the brand. With these bearing numbers, I will be able to find replacements if they are available.
  view full answer...
• Replacement Bearing Kit and Brake Assemblies for a Dexter 6,000 lbs Axle
  Hey Cory, thanks for the picture of your axle tag! For a Dexter 6,000 lbs axle you'll need the Bearing Kit item # BK3-110. This kit includes inner and outer bearings, a grease seal, races, a cotter pin, and a washer. You'll need one per hub. To replace your brakes, I have two options. Which one you need comes down to whether or not you want to manually tune them your self or have them be self adjusting. I have listed both options below: Manual Adjust - Dexter Electric Trailer Brakes...
  view full answer...
• Replacement Timken Bearings for Dexter Axle
  Hey Jared! Thank you for providing those part numbers. You have # LM67048 outer and # 25580 inner bearings with a # DX72UR (K71-305-00) grease seal. The correct Timken bearing kit is the # TMK72VR. If you need anything else feel free to reply below.
  view full answer...
• Looking For Bearing Kit With 15123/25580 And GS-2250DL Seal
  Hello Tyler, thanks for reaching out. We do offer a bearing kit that has the 15123/25580 bearings and the 2.250" ID 3.376" OD seal. For that I recommend the Bearing Kit # BK3-100. This comes with both bearings, both races, seal and cotter pin. Just comment below if you need anything else.
  view full answer...
• Replacement Bearings for Dexter 6k Axle
  Hi Josh; those numbers correspond with a Dexter 6k brake assembly. You either need # BK3-100 or # BK3-110. I don't have a way of knowing which grease seal is on there now so you can either measure the inner diameter of your existing grease seal or measure the spindle. If it is 2.125" you need the # BK3-110 and if it is 2.25" you need the # BK3-100.
  view full answer...
• Marine Grade Brake Recommendation for a 5K Axle and 6 on 5-1/2" Bolt Pattern
  Well first of all, Doug, you get a gold star for the information you provided. Thank you! We've got some drum brakes like the kit # AKFBBRK-7-D that have a Dacromet finish, but none of the hub/drum kits for a 5K axle have that kind of a finish so only like half of your brake system will be what we would consider marine grade. What I recommend doing is going with the DeeMaxx Disc Brake Kit # DE28YR instead. Not only is the whole kit covered, but the Maxx coating is rated for over 1,000...
  view full answer...
• Bearing Kit For Jayco Camper With Dexter 5,800 lb Axles
  Hey Tyler, thanks for reaching out. We don't have a good way to look up a Dexter serial number (only Dexter can do that), but we do have the sizing for their 5,200 lb axles on file here. The bearing kit you'd need is the part # BK3-110. The grease seal part number is # GS-2125DL.
  view full answer...
• How to Determine Bearings For Horse Trailer
  Hello Merle, Though we can't do anything with a VIN and have no way of knowing what bearings are on any specific trailer, you can find the right ones just by measuring. You'll need a digital caliper for this that goes to the thousandths of an inch, and you'll want to measure your spindle just as in the diagram below. For example, since you mentioned a 6,000 lb axle, if the spindle's inner bearing measured 1.750" (bearing 25580), your outer bearing measured 1.250" (bearing 15123) and...
  view full answer...
• How To Identify Replacement Bearings and Brakes for 2015 Forest River Cedar Creek Silverback 33RL
  Hello Tj; we don't have any information on the 2015 Forest River Cedar Creek Silverback 33RL so you will need to identify your axles to find the right parts. If you are able to email me a picture of the axle tag that would be the easiest way to handle it. If I had to guess based on the GVWR you likely have 6k axles. If you find that is correct, you can use the etrailer Electric Trailer Brakes # AKEBRK-7-SA. These are designed for 5,200 lb - 7,000 lb axles and fit a 5 bolt brake flange....
  view full answer...
• What Bearing Kit Fits an 11A 6K Dexter Axle
  Hey Geoff, thanks for reaching out! I believe your 11A axles have a 6K weight rating so you're looking at either the Kit # BK3-110 which comes with a 2.125" ID seal, or the Kit # BK3-100 which comes with a 2.250 ID seal. Just verify the seal inner diameter and you'll be good to go!
  view full answer...
• 5200 lb Dexter Hub Bearing Kit Recommendation
  For a Dexter EZ Lube Spindle 5,200 lb capacity part # 8-201-9UC3-EZ the bearings needed are # 25580 and # 15123. We have a bearing kit that has these as well plus the races and a new seal # BK3-110.
  view full answer...
• Replacement Hub for a AL-KO 8460
  Thanks for the picture! That is an obsolete 5,200 lbs capacity AL-KO 8460 hub. Past customers have told us it uses inner bearing item # 25580 and outer bearing item # 15123 so the kit would be Item # BK3-110. This means the right replacement hub and drum would be the Dexter Trailer Hub and Drum Assembly item # 8-201-9UC3-EZ. The correct brake assemblies would be the Dexter Electric Trailer Brakes item # 23-105-106. I highly recommend confirming this information by pulling your hub and...
  view full answer...
• Bearing Kit Recommendation for Lippert 5,200 lb Axle
  For a Lippert hub 5,200 lb capacity like part # 8-201-9UC3-EZ the bearings needed are # 25580 and # 15123. We have a bearing kit that has these as well plus the races and a new seal # BK3-110. I attached a help article down below on replacing bearings for you to check out as well.
  view full answer...
• Replacement Grease Seal for 6,000 Pound Dexter Axle
  One common grease seal size for a 6,000 lb axle has an inner diameter of 2.25" and outer diameter of 3.376" just like the # RG06-070. More than likely this matches what you have now, but you can't be 100% sure without either measuring or asking Dexter. Dexter will have the information if you give them your serial number, or you can measure the inner diameter of your seal/measure the spindle. If you find that your seal inner diameter is 2.125" then you would need the # GS-2125DL instead. In...
  view full answer...
• Upgraded Equalizers and SumoSprings for 2023 Grand Design Momentum 23G
  Since the parts are different for your 2023 Grand Design Momentum 23G we will go a slightly different route. You currently have a standard # TREQ104 equalizer on the trailer. That means the best fit is going to be the Dexter E-Z Flex Suspension Kit # K71-652-00. This includes the upgraded shackles, wet bolts, and bushing so there is no need to purchase them separately. I have this kit on my Jayco which you can see in the installation video below. For the SumoSprings you will need the #...
  view full answer...