See what our Experts say about this Inno Roof Rack

• Roof Rack Recommendation for a 1992 Honda Civic Hatchback
  I have a solution for you, but the Rola 59758 is not a confirmed fit for your 1992 Honda Civic hatchback. Instead you would want the Sportrack part numbers # SR1003 and # SR1116 if you are looking for an economically priced option or the Inno part # INB107,# INSUT, # INJK, and # INK130 for a custom fit rack that will fit very well.
  view full answer...
  
• Will the Thule Rapid 400XT Foot Pack Work on a 2009 Toyota Matrix
  I do have an option for you but I spoke to my contact at Thule and they said that the Thule Rapid 400XT Foot Pack that you have cannot be reused on your 2009 Toyota Matrix because the fit kits are no longer available. Therefore, if you wanted to reuse your crossbars you would need both the Thule Rapid Traverse Roof-Rack Foot Pack part # TH480R and the Thule Roof-Rack Fit Kit for Traverse Foot Packs part # THKIT1512.
  view full answer...
  
• Roof Rack Recommendation for a 1995 Honda Civic
  For your 1995 Honda Civic 3 door hatchback the Sportrack roof rack part numbers # SR1003 and # SR1116 is a confirmed fit. However, this is a semi-custom fit roof rack that doesn't always fit every vehicle perfectly since it's designed to fit as many vehicles as possible. A much better option would be the INNO part numbers # INB107, # INSUT, and # INJK, and # INK130. This is a custom fit rack that would fit much better.
  view full answer...
  
• Recommended Roof Rack Options For 2009 Toyota Matrix With Fixed Mounting Points
  For your 2009 Toyota Matrix the only style roof rack system is the clamp on style rather than bolting to fixed mounting points. I would recommned the Inno roof rack system with square bars that clamp securely to your roof. The # INB107 crossbars are mated with the # INSUT feet and # INK244 fit kit, and install easily. The square bars are heavy duty and work with most accessories. You might also consider the Inno # INXB108-2, with # INXS250 feet, and # INK244 fit kit for a roof rack with...
  view full answer...
• Adding Roof Rack Crossbars on a 2013 Nissan Xterra to Mount Cargo Basket
  You can add crossbars to your 2013 Nissan Xterra. The aftermarket crossbars available do fit different years of the Xterra but I can't speak to the OEM bars. To add crossbars I recommend using Inno square bars # INB107 with feet # INFR that clamp around the side rails. With the bars installed and at the proper width you can mount the Thule basket # TH859XT.
  view full answer...
• Roof Rack Recommendation for a 2005 Mazda Tribute Flush Rails
  The only roof rack designed to fit the flush rails on your 2005 Mazda Tribute roof is made by Inno and includes the following parts: - 42" Square Crossbars # INB107 - Feet # INTR - Fit Kit # INTR103 If you let me know what you plan on using the roof rack for I can make a recommendation for you!
  view full answer...
• Parts Needed to Carry a Bike on the Roof of a 1995 Honda Civic Coupe
  We do have a handful of roof racks that are confirmed to fit your 1995 Honda Civic Coupe. The most popular roof rack option that we have for your Civic is the Inno square bar roof rack which consists of the Crossbars # INB107, Feet # INSUT, Short Roof Adapter Kit # INJK, and Fit Kit # INK130. This system has a weight capacity of 140 lbs and will give you a roof rack spread of 24 inches. For a more economical options we have the SportRack roof rack option which consists of the SportRack...
  view full answer...
• Recommended Roof Rack for 2010 Chevy HHR
  For a square bar roof rack for your 2010 HHR with raised roof side rails we do have options from Thule and Inno which use either 42-inch or 43-inch bars. These can be seen on the linked page along with all other rack brands and rack types. For a cost effective Thule option I like the Rapid Crossroad setup with 43-inch square bars; this consists of parts # TH712100 and # TH710401. For the lowest-cost square bar rack Inno offers 42-inch bar setup using parts # INB107 and # INFR. Do note...
  view full answer...
• Which Yakima Roof Mount Bike Racks Work with Factory Cross Bars on a 2004 Subaru Baja
  Basically, the factory cross bars on your 2004 Subaru Baja are not directly compatible with Yakima roof mount accessories like the FrontLoader Wheel Mount Bike Carrier, # Y02103, because of their size and/or shape. But there is a solution. If you wanted the FrontLoader specifically, you would need to add the Inno Square Bar Roof Rack, parts # INB107, # INTR and # INTR104.. You can then add the FrontLoader.
  view full answer...
• Inno Square Bar Roof Rack for a 2016 Chevy Trax with Factory Side Rails
  The Inno feet # INFR are a fit for the 2016 Chevy Trax if it has factory side rails that run front to back on the roof. If you have a different roof configuration let me know. The bars that are recommend for the Trax that also work with these feet are the 42 inch bars # INB107.
  view full answer...
• Roof Rack Options for Transporting Kayaks on 1996 Honda Civic Hatchback
  Since you intend to transport a kayak(s) on the roof of your 1996 Honda Civic Hatchback my suggested starting point is a review of your owner's manual to confirm how much weight the vehicle's roof can safely handle. If you cannot find this in your manual a local Honda dealership should be able to check this using your car's VIN number. Depending on that roof weight capacity, and the weight of your kayak(s), the very lightweight foam block type of kayak carrier may indeed be a good option...
  view full answer...
• Roof Rack and Kayak Carriers for a 2010 Toyota Matrix
  To carry kayaks, a roof rack is only part of it. You'll also want a kayak carrier, primarily because they make loading, unloading and securing the kayak significantly easier. For the roof rack, if you have a bare roof with no rails that run front to back, I recommend the Inno # INB107 square crossbars, with the # XS250 feet, and # INSU-K5 fit kit. This kit is custom fit to your vehicle and installs quickly to your roof with secure clamps. Additionally, it includes locks to secure the...
  view full answer...
• Roof Rack Recommendation for 2000 Acura Integra Hatchback
  We do offer roof rack options for your 2000 Acura Integra Hatchback. Inno offers a custom fit rack which consists of these parts: • 42 inch square crossbars, part # INB107 • Roof rack feet for square bars, part # INSUT • Short roof adapter, part # INJK • Vehicle-specific fit kit, part # INK130 SportRack offers a semi-custom rack option, which would be made up with these parts: • Semi-Custom rack, part # SR1003 • Short roof adapter, part # SR1116 If I had to choose between the two,...
  view full answer...
• Will the Inno Feet for Square Crossbars Fit My 2009 Pontiac Vibe?
  I have a solution for you. Unfortunately, the Inno Feet for Square Crossbars # INXP will not fit your naked roof with fixed mounting points on your 2009 Pontiac Vibe. Although, I did confirm with Rhino-Rack that they do have crossbars that are compatible with your vehicle's rails. For the Rhino-Rack setup, you will need: - Inno Square Crossbars - Steel - Black - 42" Long - Qty 2 # INB107 - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200,...
  view full answer...
• Best Method To Haul 3 Or More Bikes On A 2011 Chevrolet HHR
  I do have an option that will allow you to carry more than two bikes on your 2011 Chevrolet HHR however, the Draw-Tite Sportframe Trailer Hitch Receiver part # 24756 and Curt Trailer Hitch Receiver part # C11447 are the only two hitch receivers available for your vehicle. As they are both a Class I hitch receivers, you will be limited to carrying two bikes on the rear of the vehicle with a hitch receiver per the manufacturer's. The most cost effective options would involve the use of...
  view full answer...
• Will the Curt Cargo Basket # C18115-117 Fit My 2000 Nissan Xterra?
  If you have factory crossbars currently on your 2000 Nissan Xterra, the Curt Basket # C18115-117 will work as long as your crossbars do not exceed 3" wide x 1-5/8" tall. In order to know for sure, I recommend measuring the width and height of your crossbars. Also, you will need to determine if your crossbars are adjustable in order to accommodate the required crossbar spread of 22"-50". The way to do this is to simply measure the space between your crossbars at different adjustable points....
  view full answer...
• Will SportRack Vista XL Cargo Box Fit a 2010 Nissan Xterra
  The SportRack Vista XL Cargo Box # SR7018 that you referenced will fit your 2010 Nissan Xterra, providing you have either factory crossbars or aftermarket crossbars that measure less than 4 inches wide. To install the cargo box the crossbar spread should be between 23-5/8 inches and 34 inches wide. I have the installation instructions attached. If you need crossbars for your Xterra, I recommend the Inno system which consists of square crossbars # INB107 and the feet # INFR. I like Inno's...
  view full answer...
• Availability Of Replacement Inno Square Crossbar For Stolen Crossbar
  Inno does not sell single square bars, so even though you only need one bar you'll need to buy a pair. You didn't mention anything about the size of your crossbar, so you'll need to measure your current crossbar and match it to one of the below lengths: 42" # INB107 46" # INB117 50" # INB127 54" # INB137 58" # INB147 65" # INB165
  view full answer...
• Recommendation for Roof Rack to Carry a Ladder on a 1993 Ford Festiva
  I can help you find the correct roof racks for your 1993 Ford Festiva. An economical option for you is the Sport Rack # SR1003 in combination with the short roof adapter # SR1116 will allow you to have a two bar system even though you only have two doors. This roof racks capacity is 130lbs. Another option and the one that I recommend for your vehicle, is the Inno kit made up of the # INB107, # INSUT, # INJK, and # INK148. This kit uses a short roof adapter # INJK also to accommodate...
  view full answer...
• Inno Square Crossbar Roof Rack that Fits 2008 Nissan Xterra
  Inno does have a roof rack that fits your 2008 Nissan Xterra that uses the # INFR you mentioned. You need just the # INFR and the # INB107 and you'd be set.
  view full answer...
• Availability of Trailer Hitch for a 2000 Acura Integra
  It looks like there are no longer any trailer hitches that fit your 2000 Acura Integra. The Curt Trailer Hitch Receiver 11147 was discontinued this year (2023) so you might try searching to see if you can find that hitch elsewhere, otherwise I recommend installing a roof rack in order to add some cargo-carrying capacity to your vehicle (if that's what you're needing to do): Sedan - 42" Square Crossbars # INB107 - Feet for Square Crossbars # INSUT - Fit Kit # INK130 Hatchback Same parts,...
  view full answer...
• Which Thule Roof Cargo Box Fits a 2007 Kia Rondo With Flush Roof Rails
  To use a plastic cargo box such as the Thule Force Medium # TH6356B that you referenced you will first need to install a roof rack on your 2007 Kia Rondo and the one I recommend is the Inno square bar system made of parts # INB107, # INTR and # INTR103. This rack is made for your flush rails. You can refer to the linked video for details on its design. I recommend using an accessory folding step like # TE97FR from Telesteps which gives you easier access to your cargo items. The lightweight...
  view full answer...
• Will the Inno Roof Rack Fit on a 2020 Nissan Kicks with Fixed Mounting Points
  It looks like the 2020 Nissan Kicks has flush mounted rails with fixed mounting points, which is likely what you're seeing on your Kicks with the flat plastic strips/covers; there should be slots that pop up to allow you to install roof rack legs with fixed mounting points. With that said, the Inno Roof Rack Kit using parts # INXB115-2 (bars), # INXS350 (towers) and # IN28FR (fit kit) you were looking at is a confirmed fit on your 2020 Nissan Kicks with those fixed mounting points. The...
  view full answer...
• Recommended Roof Rack and Cargo Basket 2011 Hyundai Elantra Touring
  The roof rack I recommend for your 2011 Hyundai Elantra Touring is the Inno Roof Rack with Square Crosbars # INB107 and Foot Pack # INFR. This economically priced roof rack clamps to your vehicle's elevated, OEM side rails. The square, steel crossbars can accommodate a variety of accessories including cargo baskets. Then, Yakima makes some very nice cargo boxes like the Yakima SkyBox Rooftop Cargo Box # Y07336. This box has 18 cu ft of carrying space. The maximum crossbar spread the Yakima...
  view full answer...
• Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
  The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
  view full answer...
  
• Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
  For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
  view full answer...
• Replacement Lock Cover for Inno Feet
  Hi Scott; sorry for the delay on this it took a while to hear back from Inno. The part you need is the Replacement Lock Cover Set for Inno Roof Rack Feet Stays for Bare Roofs # IN97YV. This replaces the lock and cover on the # INSUT. However, this will be a random lock so more than likely it won't match the others on your roof rack. We don't have a way to get a specific lock core for it to remain keyed alike.
  view full answer...
• Parts Needed to Install Old Thule Square Bars on 2000 Toyota Tundra Access Cab SR5
  Hey Chris! To install your Thule square bars on the roof of your Tundra you will need the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK153. What will you be using the solar for?
  view full answer...
• Roof Rack Recommendation for 2006 Chevy Uplander
  Thule does not make a roof rack solution that fits the naked roof versions of the 2006 Chevy Uplander. Closest thing would be the Inno brand roof rack that consists of part numbers # INB127, # INSUT, and # INK585. This won't reuse any of your Thule roof rack but your roof carriers will fit this same square bar style of rack that you had.
  view full answer...
  
• Thule Roof Rack Recommendation for 2012 Toyota Camry
  For a new Thule roof rack that fits your 2012 Toyota Camry the Wingbar Evo rack part numbers # TH711420, # TH710501, and # TH145149 would be a great choice confirmed to fit the vehicle and the bike racks you have as well as long as they can fit aero shaped bars.
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
  view full answer...
  
• How to Use Older Thule Square Bars with 2017 Toyota Highlander with Naked Roof
  Hey John, I do have a solution for you but the Thule square bar roof racks changed a few years ago and now their current feet don't work with the older style of crossbar. The new crossbar has a channel that runs along the bottom of it whereas old style did not have this. But we have found is that the Inno square bars are exact same dimensions so you can use their feet and fit kit with the bars you have now. For that you'd need the part numbers # INK666 for the correct fit kit and part...
  view full answer...
• Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar Rack
  Thule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options. For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
  view full answer...
• Roof Rack for 2013 Ford Focus
  Roof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
  view full answer...
• Roof Rack Capacity for a 2017 Ford Fiesta
  The racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached...
  view full answer...
• How To Determine Crossbar Placement On A 2024 Ford Maverick
  Hello Warren, I can definitely help. Roof rack manufacturers test vehicle roofs to determine the strongest points. They develop their fit kits to fit in this predetermined spot. So, this measurement will vary from vehicle to vehicle. For a 2024 Ford Maverick, the front crossbar will be placed 12-1/4" back from the top edge of the front windshield. The rear crossbar will be placed about 27-1/2" behind the front crossbar. There may be a bit of front/back wiggle room, but generally you will...
  view full answer...
• Roof Rack Recommendation for 2008 Honda Fit for Carrying Kayak Carrier
  For your 2008 Honda Fit the Inno roof rack part numbers # INB127, # INSUT, and # INK219 is a confirmed fit and would do a great job carrying a kayak carrier. For the carrier we have the Thule Hullaport part # TH849000 which will do a great job and is compatible. It's padded, can fold down when not in use, and can be expanded to carry a second kaya if ever needed.
  view full answer...
• Recommended Cost-Effective Roof Rack for a 2009 Chevrolet Malibu and a 2012 Nissan Maxima
  The SportRack # SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with a custom roof rack for your Malibu. A custom rack is one that uses a fit kit specially designed and tested to fit your roof properly. The most cost-effective option we have in this category is the Inno rack which consists of the Square Crossbars...
  view full answer...
• Cost Effective Roof Rack Recommendation for 2011 Honda Accord
  What we've found with the Sportrack Semi-Custom roof racks like the part # SR1002 is that they don't always fit the best. Reason being they are designed to fit as many vehicles as possible which means they don't fit everything perfectly. The price makes these hard to not be tempted by, but your best option is a fully custom fit roof rack like the Inno part # INB127, # INSUT, and # INK745 otherwise you'll have to get somewhat creative to get the Sportrack to fit right.
  view full answer...
• Roof Rack Options For A 2024 Honda CR-V
  Hey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
  view full answer...
• Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
  Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
  view full answer...
• Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting Points
  If your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
  view full answer...
• What is the Inno Roof Rack Weight Capacity for My 2016 Toyota Tacoma Limited Double Cab?
  Hello Dana, Yes, the Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2 # IN79TR will be a great fit for your 2016 Toyota Tacoma Limited Double Cab without factory rails. As for the weight rating, you are only as strong as the weakest link, the feet are actually rated for 132 pounds, so I cannot recommend putting more weight on the roof rack than that. As you already know, you will want to check your owners manual to see what Toyota says you can put up there, based on my...
  view full answer...
• Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
  The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
  view full answer...
• How to Mount Old Thule Square Bars to 2020 Toyota Camry
  Thanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars # INSUT. The Inno bars are the same as the old Thule so they're compatible with the feet. You will also need the Custom Fit Kit # INK498 to attach them to your 2020 Camry.
  view full answer...
  
• Can Old Thule Square Bars Be Mounted On A 2008 Honda Civic 4-Door LX?
  Hey Matt, thanks for reaching out. There is a solution for using the old-style Thule square crossbars on a 2008 Honda Civic, and it involves using parts from an Inno roof rack. The Inno square bars have the same dimensions as the old Thule bars and they do not have a bottom channel, so they mount the same way. To mount them on your 2008 Civic, you will need the following: - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200, XS250, and...
  view full answer...
• Parts Needed To Mount Thule Square Crossbars On 2016 Honda CR-V
  Hello Chad, thanks for reaching out. I do have a solution for you, but first I will need to know exactly what kind of Thule square bars you have. Basically there are new-style and old-style bars. The new-style bars have a bottom channel for mounting the towers. The old-style bars are just a solid bar and do not have a bottom channel. We have solutions for both, just select from the following depending what kind of bar you have. New Style bars: - Evo Clamp Feet for Thule Crossbars - Naked...
  view full answer...
• Will Inno Ski and Snowboard Roof Rack Fit On Roof Of 2013 Ford Flex Without a Roof Rack?
  I was able to verify with Inno that you will need a roof rack to use the Inno Ski and Snowboard Roof Rack # INTX726 on your 2013 Ford Flex with the bare roof. They do not have a way to install the rack the way you see in the image you found. The Inno Square bar rack consisting of the Crossbars # INB147, Feet # INSUT and Fit Kit # INK263 will allow you to mount their carrier. The mounts for the roof rack are very similar in the way they clamp to the door frames. We do have the SeaSucker...
  view full answer...
  
• Installing an Inno Roof Rack on a 2007 Saturn Ion
  The Inno Roof Rack with bar part # INB127 will install its clamps over the trim into the door of the vehicle. Your fit kit, part # INK124 will hook over your door frame and install the foot pack into the bases over the side of your roof's lip. I've included the illustrations from the instructions as a point of reference to how this should look installed. I've included an installation video for the 2017 Nissan Maxima so you can see an installation process on a similar 4 door sedan.
  view full answer...
  

Do you have a question about this Roof Rack?