bing tracking image
  1. Trailer Hubs and Drums
  2. TruRyde
  3. 4 on 5 Inch
  4. For 3000 lbs Axles
  5. Hub
  6. Agricultural
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Item # AH15450ECOMP
Our Price: $77.49
Trailer Hubs and Drums
Shipping Weight: 9 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Great Prices for the best trailer hubs and drums from TruRyde. Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural part number AH15450ECOMP can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (7)
  • Q & A (0)
  • Videos (1)
  • Photos

TruRyde Trailer Hubs and Drums - AH15450ECOMP

  • 4 on 5 Inch
  • For 3000 lbs Axles
  • Hub
  • Agricultural
  • 1/2 Inch Stud
  • LM11949
  • LM67048
  • TruRyde

Trailer Hub with Bearings, Races and Seal

  • Capacity of 1,500 lbs.
  • Use with spindle # AS1500E
  • Includes LM67048 inner bearing, LM11949 outer bearing, grease seal (2.332" OD x 1.50" ID), and grease cap (1.957")

Agricultural hubs and spindles in the most popular bolt patterns for use in building or repairing implement wagons, carts or machinery. Agricultural hubs and spindles are designed for low-speed applications; weight capacities shown for speeds not to exceed 20 mph.

AG-H6334500-1ZHA Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Replaces AH15450ECOMP

Video of Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Review of TruRyde Trailer Hubs and Drums - Agricultural Hub Assembly - AH15450ECOMP

Hello everybody, this is Jeff at Today we take a look at this agricultural trailer hub assembly for 3,000 pound axles. Has a four on five inch bolt pattern. Now this agricultural trailer hub, it's designed to fit on implement wagons, carts, or machinery that have the four on five inch bolt pattern. This hub has a 1,500 pound load capacity when used with the hub on the other side. It'll meet the 3,000 pound axle capacity that it fits on.

These agricultural hubs are designed for low speed applications, so that load capacity I mentioned is based on a 20 mile per hour maximum speed. This one here is designed for use on a spindle part number of AS1500E. And as you can see, it will include everything laid out here on the table. It includes the hub with the bearing races already installed. Comes with the inner bearing, which is part number LM6748, which is stamped on there.

Comes with the outer bearing, which is stamped with part number LM11949. Comes with the grease seal that'll go in the back here after your bearing is installed. And it comes with the grease cap that'll cover the front bearing. Also comes with four of the 1/2 by 20 size wheel bolts. These wheel bolts is what'll screw into that bolt pattern to hold your wheel to the hub assembly.

Now this is a very easy maintenance. If you notice at the top here, it has this grease Zerk fitting on the hub and that allows you to connect your grease gun to that and pump grease into the bearings without having to take apart your hole hub assembly. Now the hub diameter, which is this measurement from this end to this end, is 6-1/2 inches. The pilot hole diameter, which is measured from this to here, this pilot hole is 3.62 inches. And then the bolt pattern we mentioned is the four and it's a five inch bolt pattern.

And when we say four on five inch, what we're saying is it's four lugs. And the five inch measurement is if you would measure from the center of this hole directly across to the center from that hole or this one to this one, that measurement would be five inches. But that's gonna do it for the review on the agricultural trailer hub assembly for 3,000 pound axles.

Customer Satisfaction Score:

Customer Reviews

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural - AH15450ECOMP

Average Customer Rating:  5.0 out of 5 stars   (7 Customer Reviews)


Review the Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural - AH15450ECOMP and axel stub worked as advertised and could not expect more. would purchase again.


We are very satisfied with the parts we ordered. They arrived in a timely manner. You were the only ones we could find who carried this. Mahalo for that! Very satisfied customers!



Your product is still working beautifully! We are still very satisfied.


Product came as promised. etrailer was very helpful on phone when I call them. Very satisfied with shipment. Came a day earlier than I expected. Thanks Steve for your service


Great place to get trailer parts from.


I can't believe how fast I got it.It save my plow days no delay at all!!!


Fast shipping and product was just as described


Just what I needed


See what our Experts say about this TruRyde Trailer Hubs and Drums

  • What are the Overall Dimensions of the Dexter Agricultural Hub Assembly # AH15450ECOMP
    I pulled the Dexter Hub Assembly, # AH15450ECOMP, from the warehouse and made a simple diagram showing the outer dimensions for you to check out, see photo. This hub comes with the bearings, seal, grease cap and lug bolts. This hub fits spindle # AS1500E. If you are not sure what spindle you have or if this hub will fit on your spindle, then you can compare the part numbers of your current bearings to those with this hub assembly or you can take a few measurements of your spindle. The...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Replacement Trailer Wheel and Hub for Old 4 on 5 Inch Agricultural Hub
    Unfortunately we don't have any wheels with the 4 on 5 bolt pattern even though we do have one hub # AH15450ECOMP with that pattern. We have many wheels with the 4 on 4 inch, 4 on 4-1/2 inch, and 4 on 9.44 inch bolt patterns. I've linked the page to all our wheels to assist. I recommend replacing your hubs so that you can get a bolt pattern compatible with wheels that size. I have attached an article to assist with measuring if needed but you may be able to get the bearing numbers printed...
    view full answer...
  • Availability of Hubs That Use Inner Bearing LM67048 and Outer Bearing LM11949
    We do not have any hubs or hub/drums in a 5-on-4-1/2 bolt pattern that use your particular bearings. The bearings in a replacement hub must match those in your originals in order for the hub to fit on your spindles. We do offer one idler hub that uses inner bearing LM67048 and outer bearing LM11949 and that is 4-on-5 bolt pattern agricultural idler hub # AH15450ECOMP. This hub kit includes bearings, races and a grease seal and it is rated for off-road use up to 20-mph.
    view full answer...
  • Correct Replacement Trailer Hub with .750 Inch Outer Bearing
    I believe we have what you're looking for in the Trailer Hub Assembly part # AH15450ECOMP which uses a LM67048 inner bearing (1.250") and a LM11949 outer bearings (0.750"). This is the only trailer hub assembly we offer which uses the LM11949 bearing. This hub has a 4 on 5" bolt pattern.
    view full answer...
  • Availability Of Wheel With a 4 on 5" Bolt Pattern
    I am afraid we do not carry any wheels with a 4 bolt pattern of 5 inches. The only 4 lug wheels we offer will be a 4 on 4. We may have tires for you, but unfortunately no wheels. We do offer one hub which uses the 4 on 5 bolt pattern with part # AH15450ECOMP. This bolt pattern is uncommon these days. We really only see this on agricultural equipment. It may be possible to replace your hub with a standard 4 on 4 hub. We would need to know inner and outer bearing sizes of the current hub...
    view full answer...
  • Is There a Trailer Hub/Bearing with 1.18 Inner Diameter
    I do have a possible solution for you in the Trailer Hub Assembly part # AH15450ECOMP which uses a LM67048 (1.250") inner bearing and LM11949 (.750') outer bearing. This hub has a 4 on 5" bolt pattern, it's commonly used in agricultural applications. It's the only hub we offer with this bearing combo. Unfortunately, we don't have any hubs/bearings which have a 1.18" inner diameter.
    view full answer...
  • How to Pick Out Trailer Hub Replacement for 1986 Shorelandr
    Based on the bearings you have currently the only hub we offer that would fit as a replacement is the part # AH15450ECOMP which has a 4 on 5 inch bolt pattern. I attached a help article on determining bolt pattern so that you can verify you have the same.
    view full answer...
    Image 1 for
  • Information on Bearing Number LM11949
    This Bearing, part # LM11949, is most commonly used with the Agricultural Hub Assembly, 4 Bolt, 5 inch Circle, part # AH15450ECOMP. If you are attempting to replace existing bearings, you will just need to check your current bearings for the part number LM11949 to ensure you are ordering the correct replacement bearings.
    view full answer...
  • Trailer Hub with Inner Bearing LM67048 Outer LM11949
    We do have a hub that fits with your bearing numbers with the # AH15450ECOMP but the hub you mentioned does not fit
    view full answer...
  • Replacing the Hub on an Older Homemade Trailer With Bearing LM11949
    The hub assembly we offer with bearing # LM11949 is an agricultural hub, # AH15450ECOMP. This hub is intended for agricultural use, and the outer bearing measurement you mentioned does not match the outer bearing used by this hub and spindle. This axle uses bearings that are nonstandard, so it may be easier for your to swap out the axle for a new one that uses standard bearings. I've added a link to a list of all our available axles to see if we have one that will work for you.
    view full answer...
  • Trailer Hub Seal Recommendation for Hub with Race LM11910
    The race number you mentioned isn't a very commonly seen race but it is used on an agricultural hub like the part # AH15450ECOMP which does use the seal you referenced of # SL150.
    view full answer...
  • Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
    It sounds like you are in need of an agricultural hub like the part # AH15450ECOMP that has a diameter of .75 where the inner bearing rides and 1.25 inches where the outer bearing rides. This hub has a 4 on 4 inch bolt pattern so if you needed one with a 5 on 4-1/2 inch bolt pattern you would want the part # T1721400042.
    view full answer...
  • Replacement Axle Recommendation for a Snowmobile Trailer with Non Standard Hubs
    I wish I had a hub that would work on the spindles you have on your trailer. But none of the hubs we carry work with your bearing combination. That outer bearing you have is the problem. It's usually only used on agricultural hubs like part # AH15450ECOMP. Honestly your best option would be to replace the axle. I attached a page that has all of our axles we carry that come with hubs that have 4 on 4 inch bolt patterns. You will need to know the distance between the hub faces on your axle...
    view full answer...
  • Determining Capacity of an Old Trailer Axle with No Information on the Axle
    The 15123 bearing is still common but I could not find any information on the 09057 bearing. But given that your hubs have the 4 bolt pattern it is likely that the axle is rated under 3,000 pounds. Most likely it is a 2,000 pound axle. Measure the spindle where the 09057 bearing rides using calipers such as # PTW80157 I can see if there is a different bearing with the same inner diameter that is commonly used with 15123 and go from there. Since you still have the trailer frame as well...
    view full answer...
  • Availability of Hub for LM11949 Bearing
    Is both your inner and outer bearing the same part number? The only hub we offer that uses a LM11949 bearing would be the # AH15450ECOMP agricultural hub assembly, but it used a LM67048 inner bearing, which has a 1.25 inch inner diameter. An agricultural hub is typically used on farm equipment for low speed applications, under 20 mph or less.
    view full answer...
  • Dimensions of AH15450ECOMP Agricultural Trailer Hub Assembly
    The hub face of the # AH15450ECOMP Agricultural Hub is 6-1/4 inches in diameter, and the overall depth is 4 inches. The hub has an inner hub bore diameter of 2.328 inches with an outer bore diameter of 1.781 inches. I've shown these dimensions in the provided photo. The hub has a 1500 lb each/3000 lb per axle, and is designed for low speed applications. The bolt pattern is 4 on 5 (4 lugs on 5 inches, center to center). The hub includes the inner and outer bearings and races, the grease...
    view full answer...
    Image 1 for
  • Replacement Hub for Old Pontoon Boat Trailer With L11949 and LM67048 Bearings
    It sounds like your existing hub uses a LM67048 inner/LM11949 bearing. The only hubs we offer that would be compatible with that bearing set would be an agricultural hub like # AH15450ECOMP which is meant for low-speed use (20 mph or less) on equipment like implement wagons and other agricultural equipment that's not used on public roads. Since you have a pontoon trailer, your best bet would be to either have the spindles replaced with weld-on spindles that are compatible with modern,...
    view full answer...
    Image 1 for
  • Replacement Hub With An Out Bearing And In Bearings That Measure .74" and 1.25" For 5 On 4.5 Wheel
    We do have a replacement hub that can work. Unfortunately, it is not a 5 on 4.5. The only replacement hub we have that will fit your axles. Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural, part # AH15450ECOMP. Going with these hubs will require you to get new wheels to match this lug pattern or cut off the spindles and weld on new spindles that will accommodate a different hub.
    view full answer...
  • Replacement Axles for 1977 Giroux Tandem Axle Boat Trailer
    We do offer one idler hub kit that will fit your spindles, Redline # AH15450ECOMP, which has a 4-on-5 bolt pattern. In your 5-on-4-1/2 pattern we have no hubs that will fit your spindles. New hubs must use the same bearings in order to fit your spindles. You can have a qualified welder with the required jigs replace your spindles, or you can replace the entire axle assemblies. We offer beam axle kits as well as bolt-on axle-less suspension kits that can provide better ground clearance...
    view full answer...
  • Agricultural Hub Availability
    It sounds like you have an agricultural hub like the part # TRU54FR that has a diameter of .75 where the inner bearing rides. You will need to measure the spindle of your trailer to verify this. Where the outer bearing rides will need to be 1.25 inches, the seal surface diameter 1.50 inches. The only hub we have to fit this hub would be the part # AH15450ECOMP.
    view full answer...
    Image 1 for
  • Replacement Hub for Axle With 09074 Outer Bearing and 15123 Inner Bearing
    We do have one possible hub that would fit your spindle but it is an agricultural hub which is designed for low-speed applications. The Trailer Hub Assembly - 3,000 lbs Axles # AH15450ECOMP uses the same size bearings you currently have. I was unable to find the dimensions of that 1138758 seal but the grease seal on this hub has an inner diameter of 1.50". This hub uses a 4 on 5 bolt pattern. If this will not work as a replacement for you, your best option may be to replace the axle on...
    view full answer...
  • Replacement Trailer Hub for Flat Bed Trailer with 1.25 Inner and 0.75 Outer Bearings
    It sounds like your trailer uses agricultural hubs # AH15450ECOMP. This hub has the same 1.25 and 0.75 inner and outer bearings which are parts # LM67048 and # LM11949. Make sure your seals have an outer diameter of 2.332 inches and inner diameter of 1.50 inches. If this matches then part # AH15450ECOMP is the hub you need.
    view full answer...
  • Replacement Trailer Hub that Uses Bearings with Inner Diameters of 1.25 and 0.75 Inches
    Based on the measurements you have provided hub # AH15450ECOMP is a close match. The bearings that it uses fit on spindles with the measurements you have provided. But the seal has an inner diameter of 1-1/2 inches. It is not uncommon for the seal inner diameter to be smaller to provide a tight fit. This is an agricultural hub so it isn't very common and being an aggie hub means it is limited to 20 miles per hour. It might be more beneficial to replace the axle on the trailer to get more...
    view full answer...
  • Replacement Axle For Trailer With Obsolete DICO 15638 Brake Drum Assemblies
    You are going to have to replace your axle as the only hub we currently have that uses your bearings sizes is the Agricultural Trailer Hub Assembly # AH15450ECOMP. This will not work for a replacement due to you having a braking axle. We do have replacement axles like the Trailer Axle w/ Electric Brakes # e43SR that will provide you with all new, up to date components to replace your obsolete components. I will need some more information on your current axle dimensions and weight capacity...
    view full answer...

< Previous

Do you have a question about this Trailer Hubs and Drum?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.