"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."
Although we do not have a direct replacement for the Dicor V19582-EJN, the Replacement Wheel Master Lug Nut Cover for Wheel Liner - Qty 1 #WMRMT9061 will fit a 22 millimeter lug nut. From what I have found, the jam nut you are looking for has been…
I recommend the Wheel Masters 4-Hose Inflation Kit #WM8001-135 for the rear of your 2022 Jayco Greyhawk 27U RV motorhome. This will allow you to easily access both the inner and outer tires to add or release air when needed. For the front tires you…
I wish we could help but we aren't able to get those replacement parts. Best option we have would be an all new coupler like the part #DX56FR if you have disc brakes or part #DX27FR if you have drum brakes.
I recommend checking out the Wheel Masters 4-Hose Inflation Kit #WM8001-135 which is designed for 16" to 19-1/2" Dually wheels. These kits are universal fits so you might need to move some stuff around to get them to fit correctly.
The valve caps #WM9023-20 are specifically replacements for the Wheel Masters inflation kits, like part #WM8208. With that being said they are for your standard Schrader valve so they'll work on your vehicle's valve stems just fine. I…
For the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend #WM8001-135, the inner hose is 13 inches straight and the outside hose is 9-1/2 inches. I've attached a photo to help.
The Replacement Jam Nut #WM9072F that you referenced does look similar to the jam nuts that you are currently using to secure your Wheel Masters cover. To determine if they will fit your application though you need to measure your bolt size. This jam…
Hi Michael; you'll need the valve extenders made for the size of your wheels and 13 inches (or longer) is correct for what we offer for 22 inch dually wheels. For example you can use either the Wheel Masters 4-Hose Inflation Kit - 22" -…
If you have wheel liners then you want to use the 135 degree bend kit part #WM8001-135 but if you have wheel covers then you need the 90 degree bend kit part #WM8208 instead. Attached are demonstration videos of each for you to reference.
If the 33 mm Wheel Masters Lug Nut Covers #WM9005-6 were too big then you may need the 7/8" Covers #WM8019, 1" Covers #WM8010 or the 1-1/16" Covers #WM8011. I'm not sure what size lugs are used for your Workhorse W-22 Chassis but…
There unfortunately isn't a guide to tell us what the correct degree bend you'll need for easier access to the valve so you'll want to take a look at your valve stems to see how they're sitting and determine the route out to the front…
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."