Hey Craig! We do have the Norcold Polar N7X 3-Way RV Refrigerator #NC48VR. It operates on 120V AC, 12V DC, and LP gas, and the recommended enclosure opening is 23.50" to 23.63" wide x 52.88" to 53.01" high x 24.00" deep.…
Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
Happy to help Nick, thanks for reaching out! The Kenda Karrier ST205/75R15 KR53 Radial Trailer Tire #KE85TJ has a speed rating of 87 mph, speed symbol N is stamped on the side wall of the tire. This is a Load Range D tire with a maximum load capacity…
Hi Tyler! We do indeed have the 2-1/2" Buyers Hitch 1809070! We just have it as a different part number that I have listed below: Buyers Hitch Plate w/ 2-1/2" Receiver and ICC Bumper for Ford Cab and Chassis - 20K #BP63SR This is a bolt on…
Since wheels will be able to withstand the psi rating of any of the tires that are meant to fit it you will need to look at the valve stem as that is the deciding factor. If your valve stem has the rubber all the way up to the threads, like part…
Hey Dan, yes the sensors of the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #TM89FR that you referenced will work with the longer valve stems you have on your 2017 Jayco Greyhawk 29ME. The sensors do not have a valve stem length…
Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…
Hi James! The largest aspect ratio (tallest) tire you can put on the Dexstar Steel Mini Mod Trailer Wheel - 13" x 4-1/2" Rim - 4 on 4 - Black #AM20242 will have an aspect ratio of 80. So the largest tire we have for this wheel is the Kenda…
Hey Nick, with the Sendel Aluminum Mod Trailer Wheel #AM22646 you'd actually be limited by the valve stem for air pressure and not the wheel itself. So if you wanted to go with a higher rated valve stem like the part #AM20906 you'd be able to…
Hey Keith, I would recommend the Kenda Karrier KR35 part #KE34TJ as it will cover everything you are looking for including having a nicer looking aluminum wheel. This is a high quality tire with a Load Range of D and a higher speed rating of N that…
Hey JD! The Aluminum AM03 Series Black Machined Trailer Wheel #AM43NR doesn't come with a valve stem so there is no set psi. The valve stem is always the limiting factor. If you add the Americana Metal, Bolt-In Valve Stem #AM20906 you will be…
Hi Kyler! We definitely have center caps and lug nuts that you can use, but the Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2 #KE34TJ does not include them. With that said, I recommend the…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD
Wheel Masters Tire Repair Tools for Valve Care
Wheel Masters keeps routine tire upkeep simple. You'll find brass valve caps that fit standard Schrader valves, protect valve stems, and hold up well outdoors, with chrome or nickel-plated finishes that stay visible. It's smart to keep a few extras so every tire, including the spare, stays covered.
Yes, they work on standard air valves. No special cap is required—use a brass valve cap to keep the valve covered and protected. Verify the valve is a standard air valve and hand-tighten to protect the threads.
They protect valve stems and feel higher quality than plastic OEM caps. The chrome/brass look is easy to spot so you can confirm a cap is in place. After rotations or balancing, check that metal caps weren't replaced with plastic. Count all tires, including the spare.
They hold up well to the elements and keep their finish over time. They've stood up to harsh weather and stayed looking good after extended use. Wipe off grime occasionally to maintain the shine. After service visits, confirm the caps weren't swapped out.
Yes, they fit standard Schrader valve stems on cars and trucks. Confirm your stems are Schrader; these caps thread on like stock. Install by hand and snug them down—no tools needed. If you use an inflation kit, match the cap style used there.
Filters
