Mirrors - Wheel Masters

It sounds like you're looking for a weight distribution hitch for your camper, which we do recommend any time the trailer that you'll be towing weighs more than 50% of the weight of your vehicle. When it comes to choosing a weight…

Hi Wesley! We actually have these listed slightly wrong, so I am having that updated. There is a difference and I have that listed below: Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - **Regular Tires** - 5,200 lbs #T54KV -We…

Hey Bob, when installing the SmartPlug RV/Marine Data Port Inlet #SM36MJ you would want to use a 3 inch diameter hole saw. Do

Hello Graham, thanks for reaching out. Both the parts you mentioned, the Timbren #T54KV and #TASR5200S03 are 5,200 lb axle-less systems. The difference is the #T54KV is designed for off-road applications with offroad tires while the #TASR5200S03 is…

Hello Gary, It sounds like you’ve already done most of the right troubleshooting, so you’re definitely on the right track. With the Voyager WiSight 2.0 system #ASA37YR, the most common issue when it won’t pair is actually power at the camera, not the…

Hey, Adofo. The Longview custom towing mirrors part #LO54FR will not cover your cameras on your side mirrors. They are designed so that they can be installed on the mirrors and not affect the lights or camera on them. I've attached a photo that a…

Hello Greg, Great question, and yes level towing is important. The average height for a mid-size to full-size travel trailer is 22 to 28 inches, the average height for an F-350 with 4 wheel drive is 20–24 inches, with that being said you will most…

Hey Fernando, so our best option would be the version of the same Timbren Axle Less kit but it was designed for off road tires part #T99GR. The max tire size this works with is 35x12.5-20 instead. Only other difference is that it has a 4 inch lift…

I've got the best combination of parts for you to get your trailer setup for off-road towing! Here is a list of the parts I recommend using: - Timbren Axle-Less Trailer Suspension 3.5K #ASR35HDS02 - OR - 5.2K #T99GR - Lock N Roll Coupler A-Frame…

The Timbren Axle Less Kit part #ASR2KHDS03 that you referenced is essentially a 2,000 lb axle so it would take two of them for a 4,000 lb trailer. If you have a 4,000 lb trailer axle the most similar option that would work well you'd want the…

Hey Will, The problem with the tire size is that if you go too large the wheels are going to rub the trailer. Timbren having done the math already and listing the maximum as 35 x 12.5 x 20 lets us know that you'd really need to make some serious…

Hey Richard, you'd want the Timbren Axle Less Kit #T99GR which is a 5,200 lb Timbren Axle Less kit and then for matching hub drums that have the bolt pattern you need is the part #8-201-5UC3-EZ and then for brake assemblies #AKEBRK-7-SA are a fit…