Timken: Durable Bearings and Seals for Dependable PerformanceTimken provides high-quality bearings and seals designed to enhance vehicle performance and reliability.
High-Quality Materials:
Timken bearings are crafted for durability, withstanding wear and tear.
Improved Longevity:
Built to reduce friction and extend the life of vehicle components.
Easy Installation:
Engineered for a smooth and hassle-free setup.
Wide Compatibility:
Available in various sizes to fit a range of vehicles.
Trust Timken for reliable performance in bearings and seals.
Hi Roger! I contacted Dexter with your axle information and you will need the #25580 inner bearing and #14125A outer bearing. If you want the races as well, you will need the #25520 and #14276 respectively. The seal will be the Double Lip -…
Hey Greg, yes the Aluminum Hi-Spec Series 04 Star Mag Trailer Wheel #AM20258 that you referenced would work with a Load Range E tire ST175/80R13 like you mentioned.
Hi Craig; thank you for providing those part numbers. That is the 2.25" inner diameter grease seal so for replacement bearings you can use the Bearing Kit, LM67048/25580 Bearings, 10-36 Seal #BK3-300 you were looking at. If you prefer Timken…
Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
Hi Jeff; I'm assuming you were able to identify the parts based on the axle tag or by pulling off the hubs and measuring. Did you verify that the grease seal had a 2.25" inner diameter? The #AKIHUB-655-6-EZ-K comes with a 2.25" ID…
Hey Ryan! I sent that information to Lippert and despite the weight rating of 2,200 lbs it has a 3,500 lb axle spindle. I thought that was the case since LCI35 indicates 3,500 lbs but usually the axle rating isn't that much lower. Based on this…
Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…
After you've packed the bearings and assembled everything, carefully slide the hub assembly onto the spindle and install the outer bearing. Install the spindle and tang washer and run the spindle nut down finger tight, then rotate the hub back…
Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal #TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing -…
Hey Gary, What I'm seeing is that your 2010 Harmony 21FBS will have 3,500 lb axles so you need the Hub Bearing Kit #BK2-100. I wasn't able to find anything definitive about this though, so I do recommend checking the sticker in the middle of…
Hey Philippe, in my opinion the Hydrastar disc brake setups are the best because they have the best and most reliable electric over hydraulic actuator. We've found it's the most reliable and quickest reacting. So for a triple 7k axle setup…
You can check the condition of your hub's races by carefully removing all bearing grease with a rag to expose the actual surface of the races. When they are completely free of grease, etc., inspect them for any signs of scoring (very slight…
etrailer Assists with Timken SelectionsOur etrailer product enthusiasts are ready to help you choose the ideal Timken bearings for your vehicle.With expert advice, we make it easy to shop Timken products for durability and longevity.Let etrailer support you in finding the right Timken fit.
Timken: Durable Bearings and Seals for Dependable Performance
Timken provides high-quality bearings and seals designed to enhance vehicle performance and reliability.
