Popular Brands By Category

Towing

Sports & Recreation

Trailer

Vehicle

RV & Camper

What our customers are saying:

Quick processing, and delivery. reasonably priced very satisfied

Bernie

Krakow, WI


CargoSmart





Cargosmart Reviews and Installation Videos


See all Cargosmart videos >>

Expert Answers about Cargosmart

  • Do CargoSmart Shelf Track Brackets have a Weight Rating
  • I reached out to a representative of CargoSmart who told me the CargoSmart Shelf Track Brackets # 3481726 do not have a specific weight rating because there are so many variables in regards to how many brackets you are using, how far apart they are mounted and how the E-Track or X-Track system is mounted. I was told that if it was something relatively light, in the neighborhood of 100 lbs there would not be any type of issue but putting a specific rating on the Shelf Track Brackets # 3481726...
    view full answer...

  • Distance Between Mounts of CargoSmart Motorcycle Wheel Chock # 3481731
  • The X-track fittings of the CargoSmart Motorcycle Wheel Chock # 3481731 that you referenced are separated by 12 inches.
    view full answer...

  • Will The CargoSmart Rope Ring Work With Snap-Loc E-Track Tie-Down Anchor
  • Yes, the CargoSmart Rope Ring part # 3481767 is compatible with the Snap-Loc E-Track Tie-Down Anchor part # SLSS. The safe working load limit of the Snap-Loc E-Track Tie-Down Anchor is 1,000 lbs even if you use the 2,000 lb CargoSmart Rope Ring you still do not want to exceed the 1,000 lb rating. The compatible Snap-Loc Ring is part # SLARI.
    view full answer...

  • Will 5-Inch Wide Tire Fit CargoSmart E-Track Motorcycle Wheel Chock 3481731
  • CargoSmart Motorcycle Wheel Chock # 3481731 will accept tires up to 7-inches wide but if you refer to the linked photo you'll see that the chock's wheel hoop has a slight taper. 1-inch from the hoop's apex the inside width is approximately 5-1/2-inches, perfect for your tire; 2-inches from the apex it is 6-1/2-inches and all the way out at the opening this width is 8-inches. Since you'll be using some type of tie-down straps to help secure the motorcycle anyway, items such as E-Track...
    view full answer...

  • Dimensions of CargoSmart Loading Ramp Set
  • I contacted the manufacturer, CargoSmart, who told me the length of the ramp, not including the tabs of the CargoSmart Loading Ramp Set # 3483075, is 72-3/4". The frame is 50" wide, and the thickness of the frame is 1-3/4"; they also told me the space in between the sections is 3-1/2". This ramp weighs just under 32 lbs and has a weight capacity of 1,500 lbs.
    view full answer...

  • How Many E-Track Clips Does CargoSmart Adjustable Cargo Net for E-Track Systems # 3481709 Have
  • Actually the CargoSmart Adjustable Cargo Net for E-Track and X-Track Systems # 3481709 has 6 clips that insert into E-track. 3 on each side. One on the very bottom, the middle, and the top.
    view full answer...

  • How Much Weight Can the CargoSmart Water Cooler # 3481742 Hold?
  • The CargoSmart Water Cooler Holder for E-Track or X-Track Systems # 3481742 can be used with the 5 gallon water container full. The holder and the track are made to support that weight and will work well. This is designed for the professional that is outside in the heat and needs a cold drink so it is absolutely made for the weight and being used daily. It comes with a 1 year limited warranty. Just going by the liquid weight of 8.34 lbs per gallon, that puts just the liquid at 41.7...
    view full answer...

  • Is the CargoSmart Fire Extinguisher for E-Track Strong Enough for Vehicle Use?
  • The CargoSmart Fire Extinguisher Holder for E-Track or X-Track Systems # 3481732 is strong enough for your truck bed. You are correct that the torque is on the top of the unit, and that is why there is the clip as well as the outer arms for the additional strength and support. It is rated to safely support up to 50 lbs and has the strap adjustment to ensure a safe fit in the events you referenced. The movement if this were in a trailer is most likely greater than using in a truck so...
    view full answer...

  • Availability of E-Track Mounting Brackets
  • The E-track brackets like what is attached to the CargoSmart Accessory Bar # 3481750 you referenced are not available as a separate component, but we do have many other accessories that use the same type of mount. These include the Spare Tire Carrier # RA-16HST, Storage Hook # EM59142, and the Wood Beam Socket # 59149. I have attached a link that will take you to our complete selection of similar products that you can look through.
    view full answer...

  • Accessory Installation in CargoSmart X-Track Rails 3481787
  • CargoSmart X-Track Rails like # 3481787 are designed to allow mounting either horizontally or vertically. The rails accept compatible accessories like Dual Arm J-Hook # 3481703, Rotating J-Hook # 3481700 and CargoSmart Cam Buckle Strap # 3481768. You can position a hook item like # 3481703 in whatever orientation you need for the particular load. You do want to make sure you position the hook or other accessory appropriately so that the load is placed on it correctly. Please refer to...
    view full answer...

  • Arm Diameter on CargoSmart Extended Dual Arm Tool Hook # 3481708
  • I went out to our warehouse to take a look at the CargoSmart Extended Dual Arm Tool Hook # 3481708 that you referenced. I measured a diameter of right at 7/16 of an inch for each of the arms. I have attached an image to assist.
    view full answer...

  • Will CargoSmart Truck Bed Liner Anchor Points Work with 3/4" Hole on Truck Bed
  • I spoke with my contact at CargoSmart and he said that the 3/4 inch holes on your truck bed walls are a bit too small to use with the Truck Bed Liner Anchor Points # 348821 you referenced. The wings/toggles on the anchor points require a hole that's at least just under an inch in diameter. Another good alternative that won't require any modification to your truck bed is the Pilot Bully Clamp Tie Downs # WTD-823. These will simply clamp to the underside of your truck's bed rails to provide...
    view full answer...

  • Replacement E-Track Clip Replacement for CargoSmart Motorcycle Wheel Chock
  • The CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems - 7" Wide Tires # 3481731 does not have the E-clip replacements. If something were to happen, my contact said they would send you a replacement at no additional cost. If you just want to keep one on hand, I confirmed the clips are the same on the CargoSmart Storage Bin for E-Track or X-Track - Plastic - 50 lbs - 4" x 6" x 7" # 3481721 which would be the easiest way to have one on hand and utilized in the meantime...
    view full answer...

  • Inside Dimensions of the CargoSmart 1" Forged D-Ring Tie-Down Anchor
  • The 3" width of the CargoSmart 1" Forged D-Ring Tie-Down Anchor # 348865 is the inside width of the D-Ring. You can see this referenced in the attached review video. Please note that the weld on piece is 3/8" so you will lose that much clearance in regards to the inner height.
    view full answer...

  • What Hardware Is Needed To Secure the CargoSmart 1/4 Removable D-Ring Tie-Down Anchor
  • The CargoSmart 1/4" Removable D-Ring Tie-Down Anchor part # 3486555 that you referenced is a universal tie-down therefore there are several ways that it can be installed. If you are just using the d-rings to secure very light items then you could probably get away with just some self-tapping screws. However, if you need to secure heavier items then you would want to go the route of running a bolt though the floor and then securing the other side with a washer and nut. Depending on the strength...
    view full answer...

  • Quantity of Brackets Included with CargoSmart Folding Track Brackets
  • The CargoSmart folding track brackets, part # 3481744, includes two brackets. So the price you see on the product page is for the pair.
    view full answer...

  • Does E-Track Have to be Certain Distance From Wall to Use Motorcycle Chock
  • The CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems - 7" Wide Tires # 3481731 is about 12 inches deep (front to back) so I recommend putting your CargoSmart X-Track Rail like the 2 foot # 3481769 or 5 foot # 3481770 at least 6 inches away from the wall in front of it and horizontally however much more room you need for your handlebars not to touch the wall. I have added links to video reviews of the wheel chock and X-track for you to check out.
    view full answer...

  • Dimensions of CargoSmart Forged D-Ring Tie-Down Anchor
  • The D-ring of the CargoSmart Forged D-Ring Tie-Down Anchor # 3481763 is 2-3/8" wide and 2-1/2" tall. The mounting bracket measures 2" from the center of one mounting hole to the center of the other mounting hole. I have added a link to a video review of this tie-down anchor for you to take a look at.
    view full answer...

  • Can CargoSmart Grab Hook # 3486558 be Welded
  • I spoke with my contact at CargoSmart regarding the Grab Hook # 3486558 and while he wasn't able to tell me the exact construction of the unit he did say that they didn't recommend using this for a weld-on application. They do however have the Grab Hook # 3486501 that is made of heavy duty steel designed specifically for weld-on installation. This particular unit does still feature bolt holes as well if you decide to go that route. I have attached a short video review that you can take...
    view full answer...

  • Ramp Set that Could be Used with 1997 Ford F-800
  • A 1997 Ford F-800 can be pretty heavy based on how it is equipped. The best ramp set we have for that application would be the Gen-Y Ramps part # 325-GH-R96 have a 10,000 lb capacity. You'd still want to verify the weight of the truck though as it's possible it could weigh more than that. These ramps are 96 inches long and 15 inches wide.
    view full answer...

  • Are Brackets for CargoSmart Cabinet Available Individually
  • We likely have some parts that can help you in regard to custom brackets, but the brackets from the CargoSmart Locking Cabinet for E-Track or X-Track Systems # 3481725 are not something that can be purchased separately. I recommend taking a look at a few different options: CargoSmart Shelf Track Brackets for E-Track or X-Track Systems # 3481726 or the same brackets, which are folding, part # 3481727; there are also the CargoSmart Dual Track Brackets for E-Track or X-Track Systems # 3481728. The...
    view full answer...

  • What Is the Weight Capacity of the CargoSmart Standard Track Bungee Straps Part # 3481712
  • The CargoSmart Standard Track Bungee Straps part # 3481712 are only designed to secure small items inside a trailer therefore, they don't have the max break strength or working load limit (WILL) rating that you are after as the manufacturer simply does not test for this. However, I can tell you that anytime you are using a set of e-tracks, the weight capacity of the tie-down will be limited by how the track itself is mounted. If you needed to secure heavier items on the e-tracks you would...
    view full answer...

  • How To Add Shelves To E-Tracks Inside a Box Truck
  • It sounds like to me that you are wanting to attach shelves to the e-tracks in your box truck. If that is the case then what we have for this is the CargoSmart Shelf Track Brackets part # 3481726 which I think is what you are looking for but if it is not please just let me know. We also have pre-made shelves that fit into the e-track, the Brophy Utility Shelf for E-Track part # ETLSB and part # ETSSB or the CargoSmart Locking Cabinet for E-Track part # 3481724 and part # 3481725.
    view full answer...

  • What Is the Weigh Capacity Of the CargoSmart Folding Track Brackets 3481744
  • There is not a listed weight capacity for the CargoSmart Folding Track Brackets part # 3481744 because much of this comes from how you attach the tracks that these brackets fit in. That said, I don't think you will have any issues using this as a fold out bed for say a 250 lb person so long as the tracks are attached securely. If you need to further secure the tracks to bear more weight you can use backing plates, part # BPEZ.
    view full answer...

  • Is the Fit of CargoSmart Tie-Down Cleats 3486516 Vehicle-Specific
  • The CargoSmart Tie-Down Cleats # 3486516 which are shown in the linked video are not a vehicle-specific product; they can be installed on just about any trailer or vehicle surface that can accept the two mounting screws or bolts that will secure them. Please note that the hardware is not included. We do have a wide range of aftermarket accessory items that are specifically made for your 2019 Nissan Frontier; all categories of such items appear on the linked page. These include products...
    view full answer...