1. E Track
  2. CargoSmart
  3. E-Track Cargo Organizers
  4. Table Brackets
CargoSmart Folding Workbench Brackets for E-Track or X-Track - 26" to 40" Tall - 600 lbs

CargoSmart Folding Workbench Brackets for E-Track or X-Track - 26" to 40" Tall - 600 lbs

Item # 3481744
lowest price pledge
Retail:$181.99
Our Price: $90.86
You Save: 50%
E Track
Orders above $99 qualify for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
In Stock, Ships Today
CargoSmart E Track - 3481744
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

These brackets let you create a fold-out workbench or seat in your enclosed trailer. Telescoping legs let you adjust height of bench. Mount to X-track and E-track rails. Fold flat against wall when not in use. Requires (1) 24" wide board. Call 800-298-8924 to order CargoSmart e track part number 3481744 or order online at etrailer.com. Free expert support on all CargoSmart products. Guaranteed Lowest Price and Fastest Shipping for CargoSmart Folding Workbench Brackets for E-Track or X-Track - 26" to 40" Tall - 600 lbs. E Track reviews from real customers.
  • All Info
  • Reviews (2)
  • Q & A (4)
  • Videos (1)
  • Photos
  • Why etrailer?

CargoSmart E Track - 3481744

  • E-Track Cargo Organizers
  • Table Brackets
  • CargoSmart

These brackets let you create a fold-out workbench or seat in your enclosed trailer. Telescoping legs let you adjust height of bench. Mount to X-track and E-track rails. Fold flat against wall when not in use. Requires (1) 24" wide board.


Features:

  • Brackets help create a workbench or seat in your enclosed trailer
    • Installation requires (1) 24" wide board (not included)
    • Pre-drilled holes allow you to secure board to brackets with screws (not included)
  • Telescoping legs with adjustable feet let you adjust and fine-tune height of bench or seat
  • Legs and brackets fold flat against wall for storage
  • Easy installation - just snap spring-loaded fitting into E-track or X-track anchor points
    • Brackets can be easily moved from one E-track or X-track slot to another
  • Heavy-duty steel construction with corrosion-resistant zinc finish


Specs:

  • Quantity: 2 brackets
  • Weight capacity: 600 lbs
  • Adjustable height: 26" - 40"
  • Bracket length: 24"
  • Mounting hole diameter (each): 1/4"
  • Weight (each): 11.1 lbs
  • 1-Year limited warranty


1744 CargoSmart Folding Track Brackets w/ Telescoping Legs for E-Track or X-Track - 26-3/4" to 40"




California residents: click here


Video of CargoSmart Folding Workbench Brackets for E-Track or X-Track - 26" to 40" Tall - 600 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for CargoSmart E-Track or X-Track Folding Track Brackets with Telescoping Legs Review

Randy: Hey, guys. Randy here at etrailer.com. Today we're going to be taking a look at a folding work bench from CargoSmart.Now, this is going to allow you to have a very solid workspace inside an enclosed trailer, maybe in a house or something like that, or in your garage where you need some space but you want to have a good sturdy workbench. You can install either the vertical or horizontal E-track and really be able to use it in just about any situation. And we've got a couple of pins here that are going to pull and you can see how this is going to deploy. Legs are going to come down.

We'll just place our pin back in on both sides here.And with that in place, as you can see, it's really quite sturdy. We're using 5/8" inch thick plywood here, but you could use 1 bys, 2 bys, whatever you wanted, and those can be up to 8' long so you can get a lot of space. Now this will also double as a bench. You can see we have telescoping legs here. With those legs fully extended like we have them now, it's going to give us about 40" to the top of our work surface.

And we can bring them all the way down here. That'll get us down to 26. Now, that 26, that 28, that 30" kind of range, that's going to be ideal for benches, which we'll show you in that configuration here in a minute.But overall I think it's going to be a very handy way to get a surface in areas that you wouldn't generally want them without sacrificing that space. We can very easily pull our pins, fold this back up, and either get back to work if we're doing it in a garage, or load up whatever items we want to load up and hit the road.Now, something else comparable to this, while it wouldn't work out as a bench, I don't think, would be from Tow-Rax. They make a folding aluminum work station, more so than a work bench or a sitting bench.

That one's going to be 45-1/2" long, 18-1/2" deep. That one being aluminum, though, it certainly wouldn't be one that I'd be hammering on or something like this. This one is extremely solid. After we got it installed, I beat on it with a hammer a little bit just to see how rigid it was and it surprised me on how nice and sturdy it was. I wouldn't have any problems changing bearings, working on equipment and stuff like that on this one.

I think on the Tow-Rax, however, we'd probably have it bent and damaged. I think that's more going to be for paperwork or very light duty type maintenance, where this one's definitely going to lend itself to some heavy-duty applications.Now, there isn't a stated weight rating for this system, the tracks. Basically, since we do have our telescoping support legs here, these are nice, thick, heavy duty. I wouldn't be worried about these bending or flexing. And we've got our E-track here. You're going to be looking at a pretty significant weight, especially if it's for a bench. If we had a few of these stacked up and we had a 8' piece on it or something, I think you could get a couple of people on it.I think the E-track in the vertical position here, I think it's rated for up to 1,600 pounds, so our anchor and our bracket should also be weighted for that, or rated for that. So with those things in mind, depending on how you've mounted your E-track, if you've got it properly secured to something, that's going to lend itself to the rest of the system. But certainly, I mean, they recommend 3/8" plywood. We put 5/8" on here. But if you use an 8' long piece of 3/8" plywood and you've got it secured 6" from the end, the middle of it's going to sag, so use your best judgment. Don't overload it so you don't cause any damage, which really shouldn't be an issue if you're using it the way it's intended.Now when adjusting the height of your table, you will need your pins to be out, but it's just a matter of removing the bolt. We're going to line up our holes here. Once that's through, it'll allow it to come down. Just going to thread our nut back on, and just like we did before, we can make our adjustments. You want your pins to go in place, of course. You get those slid in on both sides.But overall, you can see it's nice and solid. It's sturdy. Not a lot of give to it. Making the adjustment took us around three or four minutes. It's not all that difficult. I don't think it's something I want to do every hour, but overall, to go from a bench like this back up into a work bench, it's not going to take you that long to do.Now the installation's going to begin like any E-track or X-track type accessory. You're going to pick the height you want to go to, and we'll pull in on that lever and we'll bring it in, allow that to go down and that tab will go back in place, so that's going to hold it secure at that point. Once we've got that in, we're going to pull our pin at the bottom. We'll let our leg come down. Then once we have that out and we've got our leg deployed, we want to pin it in position. That's going to keep it from moving in and out, so we'll use the provided pin, and bring that through.Now we'll check our level here and we can extend the foot out where we get it to a nice level position, and then that nut that's on there, just bring it up so it makes contact there on the bottom. I don't think you need to overtighten it or anything. That's just going to hold that position for us. We can do the same thing with our other side and then we'll get our board and stuff.You can see we moved it up a little bit. It's going to give us better access on the bottom side when we start putting in our fasteners. You just want to get it in place, and I'd do a few measurements if I we're you. I'd basically measure from the outside of your work surface to the inside of that bracket. I'd want to make sure those are nice and square. And you want to use . They recommend at least 3/8" plywood. You can get creative with what you want to attach here.Then we squared up the back side first, so from the outside edge of our work surface into the bracket on both sides of them, make sure that's square. Then I'm going to flip my rear-most fastener in. We'll come out here to the front. We'll get those squared up and put our fasteners in there, then we can fill it in on back. Now the holes to mount, they say use a number 10 wood screw. That'd be if you're going into wood, something a little bit thicker than this, maybe. I don't know how short they make those. The thickness of the steel's 1/8", so we're using a 5/8" sheet of plywood, add that additional 1/8" in, it gives us 3/4" thickness. I'm going to be using a 3/4" screw. Let's go in from the bottom.Then when we're done with our project or when we're ready to store the table, we just want to pull the pins on each side there. Rotate it up and out of the way and then we can just repin it. That'll keep it up in the stored position for us. As you can see, it doesn't take up a whole lot of room, so it's a convenient way to get a very sturdy work bench without sacrificing a bunch of room in your trailer every day.Overall, I think this is going to be a really good solution, whether you need a work bench, you need a bench, you need somewhere to lay . If you stretch this out a little bit, put your brackets a little bit further away, give you a nice spot to sleep. I think everybody's needs going to be a little bit different for this and what your ideal use of it is, but it's going to be nice and solid. It's not going to be something that you're worried about bending, breaking, or falling over on you while you're trying to use it.


Customer Reviews

CargoSmart Folding Workbench Brackets for E-Track or X-Track - 26" to 40" Tall - 600 lbs - 3481744

Average Customer Rating:  4.0 out of 5 stars   (2 Customer Reviews)

These brackets let you create a fold-out workbench or seat in your enclosed trailer. Telescoping legs let you adjust height of bench. Mount to X-track and E-track rails. Fold flat against wall when not in use. Requires (1) 24" wide board.

- 3481744
by:

I would prefer to give these stands about a three and a half Stars - the only reason they deserve a four is because of their thick, solid construction. As with other etrack accessories, they're mounting is very loose and flimsy feeling - they wobble profusely though the mount to the E track is solid and firm. My intention was to leave these as individual brackets I could swing down and make a temporary table when necessary. But has shaky and wobbly as they are it is necessary to permanently attach a shelf or boards to a pair or more of these to keep them from vibrating off of the wall. Another reason for a lesser grade is the retaining pins that keep the legs straight or lock them in the upright position are cheap and the detents are nearly non-functional. I will have to go to a hardware store and pick up some better ones. 734744



- 3481744
by:

Another great product from Etrailer. This will be ideal for what I have in mind for my Trailer completely adjustable to acomadate a lot of different heights. 725477


2
2

Ask the Experts about this CargoSmart E Track

  • What Is the Weigh Capacity Of the CargoSmart Folding Track Brackets 3481744
    There is not a listed weight capacity for the CargoSmart Folding Track Brackets part # 3481744 because much of this comes from how you attach the tracks that these brackets fit in. That said, I don't think you will have any issues using this as a fold out bed for say a 250 lb person so long as the tracks are attached securely. If you need to further secure the tracks to bear more weight you can use backing plates, part # BPEZ.
    view full answer...
  • Quantity of Brackets Included with CargoSmart Folding Track Brackets
    The CargoSmart folding track brackets, part # 3481744, includes two brackets. So the price you see on the product page is for the pair.
    view full answer...
  • How Far From the Track Will the CargoSmart Folding Workbench Sit When Folded Up for Storage
    The CargoSmart Folding Workbench # 3481744 will sit approximately 3-3/4 to 4" out from the CargoSmart X-track mount # 3481770. The braces on the CargoSmart Folding Workbench are 2-1/2" tall and the bracket that mounts in the X track is sits approximately 1-1/4" from the bracket; a lot of this will depend on how thick the board that you use on the work bench is. I've attached a photo to show some of the measurements that I took on this part out in our warehouse.
    view full answer...
  • How To Build a Table On the Erickson Horizontal E-Tracks
    If you want the table to span the width of your van then the best option would be to use a few of the CargoSmart Board Holders part # 348892 and then build a table on these using 2x4's and plywood. If you only want the table to go on one side then the best option would be to use the CargoSmart Folding Track Brackets part # 3481744 and then build your table out of plywood. These will both work just fine with the Erickson Horizontal E-Track part # E19148 so long as you are able to find a...
    view full answer...

Do you have a question about this E Track?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality e track for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate e track information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Video Edited:
Jacob T
Installed by:
Kathleen M
Installed by:
Randy B
Updated by:
Matthew S
Video by:
Zach D
Written by:
Erin H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-8924