Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…
Hey Eli! The first thing you want to do is make sure you have brake flanges on those axles. You also need to take a look at the axle tags and find the axle capacity. More than likely they're 3,500 lb axles so I'll answer based on that. If you…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hey Glen. We've got a couple of options for Optronics Smoke Series lights but we don't have the STL87DSRSHB which is a part number for a 10 pack. It looks like Optronics is phasing out the STL87 smoke series as well so I can't get them.…
The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…
Hey Rick. Unfortunately that's correct the Wesbar Tail Light 271594 has been discontinued. Our best option for replacing it is the LED Trailer Tail Light item #STL36RB for the passenger side and item #STL37RB for the driver side. The Wesbar light…
The Wesbar 271594 is a sealed light which means the lens is not replaceable. The only solution is to replace the entire light. The parent company for Wesbar recently changed, so as of May 2023 this particular light is on indefinite backorder. I…
Hey Harry, thanks for reaching out. Your Coachmen Freedom Express is set up for 30 amp service and we do have twist lock power inlets that will work for you. What you'll need is one of the following: - Mighty Cord Replacement RV Power Inlet -…
That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Illuminate Your Adventures with LED Utility Trailer Lights
LED Utility Lights for trailers offer bright, reliable illumination for any adventure. Perfect for enhancing visibility in utility trailers, these lights are easy to install and provide ample lighting for various applications, from under-bed rail lighting to enhancing your boat's live wells.
LED Utility Lights provide bright, clear illumination, making them ideal for various trailer applications. They enhance visibility in dark conditions, are energy-efficient, and have a long lifespan, making them perfect for under-bed rail lighting or illuminating boat live wells.
For a secure installation, ensure the surface is clean and dry. Use heat shrink butt splice connectors for water-tight connections. If adhesive fails, consider additional mounting brackets or RTV sealant for extra hold, especially in high-vibration areas.
Yes, LED Utility Lights are designed for outdoor use. They are durable and can withstand various weather conditions. For added protection, use shrink tubes on connections to prevent water ingress, ensuring long-lasting performance.
Absolutely! These lights are versatile and can be used on trailers, motorcycles, and even off-road vehicles. They provide excellent lighting for rear luggage compartments, sidecars, and more, offering a cost-effective alternative to more expensive OEM options.
Some may experience adhesive failure; ensure surfaces are prepped properly. If issues persist, use additional mounting solutions like brackets. For connection issues, ensure all connections are secure and protected with heat shrink tubing to prevent moisture damage.
Filters
