Hey Greg, since you have a Blue Ox tow bar the correct base plate kit would be the Blue Ox part #BLU53FR. Since you said you wanted an EZ wiring lighting kit the Curt wiring harness part #C96JR would be what you want as this does not require any…
Hi George! The Demco Stay-IN-Play Duo #SM99251 will absolutely work on your 2026 Chevy Trax. Since it does not have a vacuum booster and you need to disconnect the battery when flat towing, you will need to leave the vacuum line and check valve open…
Hi Joseph, the 3,500 pound rating on part #C80136 is for each individual safety cable, not the pair. That said, the ratings are not added together, so the maximum weight of the vehicle or trailer being towed still cannot exceed 3,500 pounds. The…
I sure can Blake! I just heard back from Dexter and both of your axles are 3,500 lbs capacity. That's all the information they were able to provide. Here are the replacement parts you've requested: Hub/Drums - 5 on 4-1/2 Lug Nut Pattern item…
In addition to the base plates like the Blue Ox set you have for your 2022 Chevy Spark, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars…
Hi Arthur, I took a look at your list of parts to flat tow your 2026 Jeep Wrangler Rubicon and it looks like you have almost everything you need! For the Blue Ox Patriot Supplemental Braking System part #BLU37TR, it plugs directly into a 12V outlet…
Hey Sharon, sounds like the 2015 Jeep Wrangler you have has a Roadmaster base plate kit installed on it currently. So that would mean you would need a Roadmaster tow bar like the Falcon 3HD part #RM27NQ that you referenced. Is there any evidence of a…
Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…
Hey Mark, great question but the current Blue Ox Patriot #BLU37TR has a hybrid mode that you would need to put it in for your 2024 Ford Maverick hybrid. This will take care of most of the initial setting issues you are concerned about but aside from…
Hello L; to flat tow your 2026 Chevy Trax you will need a tow bar, base plate kit, safety cables, wiring, and a supplemental brake system. I recommend the following: -Roadmaster Direct-Connect Base Plate Kit #RM25EQ -Roadmaster Falcon 3HD Tow Bar…
The Battery Disconnect part #RM-766 installs on the positive battery wire so that when activated all power is cut for the vehicle. See attached chart. What you would need to do is install the #RM-766 after the connection you have for your Brake Buddy…
I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Dial in a tidy hookup with 36 inch long safety cables sized for flat towing. This length is a common choice that works well for wrapping around each frame rail when your base plate lacks hooks or when using d-ring adapters, then connecting out with quick links. To confirm fit, measure the distance from where the base plate kit attaches to the nearest frame hole.
Yes, they can be used as short extensions to gain extra length. Confirm the links open wide enough for your hooks or snap rings. After routing, verify there's clearance at full turn so nothing binds. If a cable rubs a frame edge, add protection or reroute to prevent chewing through the coating.
Measure from where the base plate attaches to the frame hole nearest and compare to 36 inches. That length is a common fit for short frame-wrap connections. If you're tight on reach or added gear changes your routing, step up in length or add a short extension. Make sure the connectors can reach without binding.
Installation is straightforward. Wrap to the frame and secure with quick links or the provided connectors, then clip to your tow setup. Check that the connectors are large enough for your mounts and move smoothly. Avoid routing that lets the cable rub on the frame, which can wear the coating.
Attach them to the vehicle's frame. Wrap a short cable around each frame rail near the bumper and bring the ends together with quick links, then connect your tow bar safety cables to those links. Check that the connectors fit your attachment points and that the cable path avoids sharp edges.
Filters
Safety Cables Parts or Accessories
