Hey Leo. The threshold mounting plate on the Lippert SolidStep 4.0 RV Steps item #LC65DX extends 6" past the opening of your RV's doorway. It's only 3/8" tall though. When the steps themselves are folded up and not being used…
Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.
Hey Woody, For your 2025 Grand Design Reflection 337RLS, I don't think you'll have any trouble getting either the MORryde RV Cargo Slide Tray - 72" x 39" - 2 Way Slide - 80 Percent Extension - 500 lbs #MR33FR or the MORryde RV Cargo…
Hey Randy! The cost of those replacement parts can definitely get out of hand. The right MORryde StepAbove RV Steps will depend on the measurements on your motorhome. You will need to measure your doorway width (from inside flange to inside flange)…
Hey Nicholas, thanks for the pics and information. To replace your Dometic Brisk II 9105304474 AC, I recommend the Advent Air RV Air Conditioner System item #ADV92SR in white or item #ADV62SR in black. There's no way to just replace your AC unit…
Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…
Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…
Hey John! You weren't finding that SolidStep because Lippert discontinued it in 2024 and that table wasn't updated to reflect this. What I recommend instead is the MORryde StepAbove RV Steps #MR26RR. These are designed to fit 23-3/4" to…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hi Frank, The In-command system does limit our options for what air conditioners we have that'll work with that system. You can replace your Coleman AC with the Dometic FreshJet 3 RV Air Condition part #DMC94JF and install the Dometic Climate…
Hey Tom! Do you currently have the Kwikee 47 series on your Entegra Cornerstone? It looks like that is what was used on the 2014, but we have no way of confirming this for your 2017 without you checking. Assuming you do, the Replacement Steps, Motor,…
Hey Steven, thanks for all of the info you listed on your Grand Design 310GK! Based on that the correct Lippert SolidStep RV Steps are the #LC791574 that you referenced. This matches your doorway width and is a 4 step like you have as well. Is your…
Stepping in and out feels natural with 3 steps when your entry height makes a two-step set too tall. Measure your door frame width and the entry height to choose the right fit, and note that rise options like 8" or 9" change the distance between steps. If you want extra stability, consider ground-contact designs that steady the RV and reduce flex.
Installation can be straightforward and may bolt in place of existing steps. Have a helper—the assembly can be heavy while you start the first bolts. Use included spacers if needed, and check door-frame clearance; a tight lip can keep steps from folding fully. In some setups, the supplied fish wire may be short, so have extra wire on hand.
Rise is the distance between steps. Choose it to match your entry height so the steps land comfortably. Entry height is measured from the top of the doorway threshold to the ground. Some 3-step options fit 23-3/4 - 26-1/4 door frames with entry heights like 30 - 33-1/2 or 34 - 36 depending on rise.
Measure the door opening width and confirm the steps can catch the door frame lip. If the opening is wider than the step's rated width, they may not hook the frame even with adjustment. Check if a backing plate is required for your install, and verify entry height so the 3 steps reach the ground properly.
Yes, 3-step designs with direct ground contact can feel steadier and help reduce flex. Adjustable feet keep the steps level and solid on uneven ground. This can help stabilize the camper from rocking when stepping in and out.
Fold-Down Step
Pull-Out Step
Snap-On Step
Filters
