Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These steps lock firmly into place to give you a steady, bounce-free climb. Each leg extends and adjusts independently, so both feet sit flat even on uneven ground. With a 500 lb weight capacity and a rigid aluminum design, they stay stable when you’re carrying gear or helping pets or family step in and out.
Each tread flips up before folding away, so mud and gravel fall outside instead of collecting inside your doorway. The design helps keep your flooring cleaner and prevents grit from being tracked in. When it’s time to travel, the triple steps fold up and lock behind the door to stay protected from weather.
The lightweight aluminum platforms make lifting and lowering feel almost effortless. Once folded, the steps stow neatly behind your entry door and secure for travel. If you ever park where the steps can’t fold down, you can quickly pull the hinge pins and detach them to reach your door.
The textured surfaces and non-slip tread tape give you confident footing in wet or muddy conditions. The top step is 10-5/8" deep, providing extra space for your feet when stepping out. Combined with rustproof aluminum platforms and a powder-coated steel frame, the setup stays durable and corrosion-resistant season after season.
This 3-step model fits doorway widths from 23-3/4" to 28-1/4" and entry heights between 30" and 37-1/2". It’s a smart choice for normal entry doors or layouts with interior stairs that extend into the doorway, needing only 5-1/2" of inside clearance when folded up.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, Steven here with etrailer.com. Let's take a look at our MORryde flip tread RV steps for a 23 and three quarter inch to 28 and a quarter inch wide doorways with three folding steps. So folks, a nice set of entry steps will make it easy to climb in and out of your travel trailer or fifth wheel. They're super easy to fold down like you see here. They're in place. Now, keep in mind, I've got these mocked up on some different height blocks and different things, so they're not actually installed or anything.
So I'm gonna be limited as far as what all I can truly show you in action. But I'm gonna do my best. So starting with these again, can fold up so the treads can fold up. And then whenever you need to get into the door and stuff, if you need to, you could pull a couple pins on the backside and pull the whole set of steps out. That way you don't have to worry about getting locked out if you park in a tight spot in a storage lot or something like that.
So very nice, simple to fold down as you just saw me do. Again, they are detachable. So these are gonna help you get in and out of the door if you're in tight spots. Now they are gonna give you the included mounting screws here. I just left them in the bag and you gotta get nice tread with these.
They've got the aluminum steps with the grip tape here on all three steps. The legs on the bottom are adjustable as well. So I'm gonna go ahead and pull this up. So bear with me here and I'm gonna try to get it closer here for you. So both sides of these legs, you can pull these pins that come with it, and then you can pull these legs up or down as far as the height and get you a different height on the steps.
Now what I've got it here, I wanna show you the backside here. You can see those blue tabs. Alright, there's one over here and on the other side, down at the bottom. So those are those tabs that you're gonna be able to access to take the whole set of steps off and detach 'em if you're in those tight spots for parking. And like I said, so very simple to do. Again, pins on the legs themselves make it easy to adjust the height whenever you're in place. So again, if this height was too, maybe it wasn't touching the ground quite, you could move those pins on both sides and slide them legs down to get you a better height. They're made here in the US, they come preassembled out of the box. They are a nice powder coated steel frame, again with the aluminum tread plate. Now, as far as an entry height from the ground up to the threshold on your door, you need to have a distance of between 30 to 37 and a half inches. Now these steps, let's get some measurements on the steps themselves. Overall width, I got about 18 and five eighths. And as far as a depth on each step, where your foot's actually gonna go on, right at eight inches. So plenty of space to step on, it's actually gonna be a little bit more probably than what you're used to. I believe inside the house they're about seven and a half inches or something like that on average. Now the nice thing about these legs being adjustable that I mentioned is now if you need to get one leg lower than the other, if you're on uneven ground or something, you can just pull the pin on one side, adjust it as needed as well. So that's a really nice feature. MORryde's been doing a great job on the years of one, creating a great product, but two, thinking about you, the end user as far as usability. So they've had this style of step for years, it just wasn't really detachable for getting in between those tight spaces and stuff. So over the years they've changed that. So they've listened to everyone's feedback and they've just made a great product again. So again, nice set of steps. If you're looking for something where three steps and those measurements match what your needs are, I recommend them. They do have a nice high capacity of 500 pounds, and I think that's gonna wrap it up for our quick look today folks, thanks for joining me. Again, I'm Steven, have a good one.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Do you have a question about this RV Step?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Lazer S.
4/21/2026
Sorry to hear they weren't an exact replacement on your Brinkley, Tracy. It would make or jobs a lot easier if we knew what was on each trailer/camper/RV, but unfortunately, that isn't something that we can typically find. Even with the VIN. Would be nice though. Since they are more narrow, have you thought about adding a handle to help going up and down them? Or is it livable as it is?