Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Tony, you would need to go with an E-bike rack that is rated for the rougher ride quality at the rear of RVs like what you have like with the Lets Go Aero part #LGA25VR . What e-bikes do you have?
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
Hi Sue, I don't recommend using the etrailer High-Low Adjustable Adapter part #e52ZV to lower your bike rack. Using an adapter decreases the tongue weight of your trailer hitch by up to 50%. The typical e bike can weight anywhere from 50-80lbs…
Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Scott. The Lets Go Aero Jack-E Bike Rack item #LGA92ZR does not swivel and doesn't have a simple process for swapping out propane tanks. You'll need to remove the bolts attaching the tray to the supports to be able to remove your propane…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Ginger! The Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack #LGA92ZR requires minimum of 24-1/2" from center of jack hole to the front of the camper itself, so if you have 25" then you are right there and it would…
Hey Tony, you would need to go with an E-bike rack that is rated for the rougher ride quality at the rear of RVs like what you have like with the Lets Go Aero part #LGA25VR . What e-bikes do you have?
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Brett, the Lets Go Aero Jack-E Bike Rack for Electric Bikes #LGA92ZR that you referenced was designed to fit above propane tank covers like you can see in the attached picture. I don't see how it could fit behind the handles you have on that…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
Hi Sue, I don't recommend using the etrailer High-Low Adjustable Adapter part #e52ZV to lower your bike rack. Using an adapter decreases the tongue weight of your trailer hitch by up to 50%. The typical e bike can weight anywhere from 50-80lbs…
RV & Camper Bike Racks: RV Hitch Rack, Frame Mount
Set up a solid haul behind your rig with an RV hitch rack that secures bikes by the frame. Frame mount hold-downs work with fenders and different frame shapes, including many step-through styles, and keep ebikes firmly in place on the road. For very low step-throughs, an adapter bar may be needed to get a snug fit.
A well-set Frame Mount RV Hitch Rack feels sturdy and holds bikes firmly. Some jostle while driving is normal, so use the anti-rattle and tighten clamps. After positioning each bike, recheck all hooks and straps to minimize movement. If you adapt the mount to a trailer tongue or other spot, confirm it's secure and that tilt or folding still operates safely.
Yes, there are RV/travel-trailer approved Frame Mount RV Hitch Racks used successfully with e-bikes. Look for a reinforced shank and verify the rack's per-bike weight rating and its rating when used behind an RV. Place the heavier bike closer to the vehicle when possible, but reconfigure if hook lengths or positions require swapping.
Setup is doable, but allow time to assemble and dial in bike positions. Some needed extra time or small adjustments, especially with low step-through frames. Do a test load and short drive. Check the hitch anti-rattle—threaded bolts reduce movement, but if a supplied through-bolt/lock feels light-duty, consider upgrading for a more secure fit.
Yes, a Frame Mount RV Hitch Rack can secure step-through and fendered bikes by clamping to the frame or seat post. Ratcheting hooks that attach to the frame mean fenders are not an issue. If the frame is very low, plan on using a bike frame adapter bar. Check that the hook travel reaches your frame without contacting cables or fenders.
2 Bikes
3 Bikes
4 Bikes
5 Bikes
RV and Camper Bike Racks Parts or Accessories
Filters
