Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs
(268 reviews)
Price: $126.61
In Stock
Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs
Item # FW16000101
Retail:$197.66
Our Price: $126.61
You Save: $71.05
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (268)
- Q & A (0)
- Photos
Fulton Trailer Winch - FW16000101
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- Polyester Strap
- Standard Duty
- Single Speed Winch
- Fulton
- Standard Hand Crank
The rust-resistant, cast aluminum frame on this fully enclosed winch makes it perfect for marine use. Other unique features include adjustable handle length and configuration, an easy-to-use pawl-engaging lever and a dual-gear drum. Strap included.
Features:
- Completely enclosed design is durable and stylish
- Cast aluminum frame provides corrosion resistance
- Aluminum, soft-grip handle offers ultimate adjustability
- Switch from right- to left-hand drive configuration
- Adjust the handle length to 6" or 7" to balance torque, speed and clearance
- Quick and easy installation with Fulton's Easy Install System
- Fits industry-standard mounting pattern
- Includes necessary hardware
- Easy-to-use lever engages and disengages pawl
- Dual-gear drum and solid drive gear allow for smooth, reliable operation
- Handle can be turned in reverse to slowly let out strap instead of freespooling
- Freespooling option available
- Rear strap guide helps to prevent strap from making contact with gears
- Strap with hook included
Specs:
- Handle length: 6" or 7"
- Gear ratio: 4.1:1
- Hub diameter: 0.65"
- Drum storage: 20' long x 2" wide strap
- For use with strap only
- Weight capacity: 1,600 lbs
- Limited lifetime warranty
FW16000101 Fulton F2 Marine Trailer Winch - 1,600 lbs
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs - FW16000101
Average Customer Rating: 4.8 out of 5 stars (268 Customer Reviews)
The rust-resistant, cast aluminum frame on this fully enclosed winch makes it perfect for marine use. Other unique features include adjustable handle length and configuration, an easy-to-use pawl-engaging lever and a dual-gear drum. Strap included.by: William08/14/2021
The Fulton trailer winch seems pretty well made,is appealing to the eye, and serves its purpose well, but I would urge Fulton to use stainless steel hardware in the future.Many boaters don't have access to a garage so there vessel has to remain outside in the elements.
by: Tom08/20/2018
Just what I needed to replace my old worn out winch. Looks great on my boat and lots easier to use. Easy to install and had all the needed hardware. Shipping was fast and free !!! Great job etrailer !!!!
by: Roberto04/20/2018
This is still a very good product after a year of purchase. Very happy with it. Does the job and is good looking
by: Michael02/06/2018
I ordered a spare tire and wheel along with a winch and spare tire mount, As always when dealing with etrailer the products were as described, at a very reasonable cost, and were shipped promptly. The packaging was first rate so there was no damage during shipping. My go to supplier for all my trailer parts and accessories. I heartily recommend that one should check them out. Thanks for the great service etrailer.
by: Richard03/27/2020
Installed on trailer today. Easy to install great quality. Works
by: Dave S.12/08/2016
Very happy with the service from etrailer.com. Items arrived quickly and undamaged. I really like this Fulton jack and matching winch. They really freshened up my trailer.
Dave S.
12/9/2017
They are working just fine. Thanks for following up.
by: Charles12/22/2018
The Fulton boat winch has been working great. The winch handle, with the options has been especially working out for me.
And as always etrailer has provided exceptional service.
Charles
12/23/2019
It’s still working, again being able to swap handle in different positions has been a plus for me. As I sold the bass boat I had the winch on. But I swapped the winch over to my bay boat before I sold it, so I was able to keep the winch.
by: James S06/26/2020
This boat winch is easy to use and it looks great on my boat trailer it has a adjustable length handle for more leverage when needed
James S.
7/1/2021
Winch has worked flawlessly
by: Blake10/16/2018
I installed this winch on my 07 BoatMate trailer to upgrade to an easier and safer (non exposed gear teeth) unit. My trailer uses two mounting bolts that go through a section of square tubing and are inline with each other. It was a little tricky to get the lower bolt installed, but it worked out well. The mounting issue is why I’m giving it 4 stars. It’s easy to operate and pulls the strap in quickly.
by: Andy 09/08/2020
etrailer is the absolute best place to deal with for trailer parts especially when your in a hurry and always on the road. There ordering and shipping process is the fastest in the industry and when your broke down or needing parts in a hurry thats what matters most. Give em a try you wont be sorry. As for the winch I ordered, it was exactly what I ordered and needed, ten minutes to put the strap and handle on and another 10 minutes to switch it out. Back on the road and towing safely in under 30 minutes!
by: Tony P.08/26/2017
Needed a replacement for the original winch on my boat trailer. Very impressed with the quality of item. Well built and easy to install.
Tony P.
8/27/2018
Everything has been good. All the products that I have purchased from you guys are holding up great.
by: Joseph02/01/2018
Trailer jack is working great ! The trailer winch works well and is easy to crank the boat when securing it on the trailer .
by: Beau 03/11/2023
Unbelievably fast shipping!
by: Eddie03/08/2022
etrailer's customer service I would rate a 10. Placed an order for an F2 winch and within just a few days UPS delivered it to my home. If you need trailer parts I would highly recommend etrailer.
by: John W.09/22/2016
One year of operation and the winch has worked flawlessly. It is a good looking design. I have recommended Fulton winch to my friends with larger boats, who have purchased for their trailers.
by: Best Winch04/26/2020
This is the best winch I have used. Easy to install, doesn’t bind, looks great, and you won’t get the strap caught in the gears! Well worth the money! Want a good winch? Buy this one!
by: Troy08/21/2019
Bought a new Tahoe 1950 deck boat last year and the trailer had the Fulton XLT on it. It failed so I replaced it with this one. This one has the aluminum housing and is made in Mexico, the XLT has a plastic housing and is made in China
by: Allen 08/16/2018
Great product - good video - staff extremely knowledgeable - the products are exactly as described and pictured.
Allen
8/17/2019
works great
by: Bob05/13/2019
The product arrived on time and was exactly the correct assembly. Installation was easy with the included instructions.
by: KENNETH04/07/2017
Works just as described, installation was a snap couldn't be happier. Good communication from the seller and shipping was fast, I'll buy here again when I need anything "trailer".
Thanks
Ken
by: Robert05/30/2019
All of the products I have purchased from etrailer have been very useful and quality products the videos of the products are excellent and assuring me of what I am purchasing is going to be right the first time
by: Dave12/19/2016
Fulton F2 jack and F2 winch Came today! on trailer and ready to go to the river on Wednesday< Easy to assemble A Big Thanks to George at E-trailer, will order again. Thanks Dave <><<
by: Steve01/01/2022
Replaced my old winch with the F2 and looks great and is a little more heavier duty for winching up the boat.
25
268
Show More Reviews
See what our Experts say about this Fulton Trailer Winch
- Winch Recommendation for Boat Trailer that Allows Handle to be Installed on Either SideWe have the Fulton F2 winch part # FW16000101 which allows you to use the winch handle on either side of it.
view full answer... - Winch that Can Fit in Place of Ranger Trailer Trailer WinchThankfully winch mounting brackets are all made to be pretty much the same and the winches have slotted mounting holes to allow for more flexibility there as well. So you could use a winch like the Fulton F2 # FW16000101 like you referenced.
view full answer... - Size of Mounting Bolts that Come with Fulton F2 winch part # FW16000101The bolts that come with the Fulton F2 winch part # FW16000101 that you referenced are 3/8 inch diameter Grade 5 bolts. I also attached a review video link for this winch for you to check out as well.
view full answer... - Winch Recommendation that Can Have Handle Installed on Either Side of ItFor a winch that you can move the handle to the left side you can use # FW16000101. This winch is specifically designed to allow the handle to be installed on either side easily so it would work the best for you. Check out the review video I attached for more info as well. The MT70176 is not designed to have the handle installed on the other side of it so I cannot recommend it for you.
view full answer... - Solution for Replacement Drum for Fulton F2 Fully Enclosed Trailer WinchThe part you're referencing is the drum of the Fulton F2 Fully Enclosed Trailer Winch # FW16000101. Unfortunately, Fulton does not offer this part as a replacement. The only solution is to replace the winch with a new Fulton F2.
view full answer... - Does the Handle Change Directions When Switching Sides on the Fulton F2 WinchThe Fulton F2 Fully Enclosed Trailer Winch part # FW16000101 will allow you to change the side of the handle but that would then in-turn change the direction of rotation. The strap can be configured to spool over or under the drum which is further explained in the owner's manual.
view full answer... - Can Fulton F2 Winch FW16000101 Be Installed With Only Two Bolts In Straight Line No, The Fulton F2 # FW16000101 uses the industry standard mounting pattern which is shaped like a T as you mentioned. Your best option is just drilling/modifying the mounting plate for this pattern as its used by virtually every winch, and you'll have a really hard time finding a winch that'll mount any different. If you can send me pictures and measurements of your current mounting pattern I can see if on the off chance we have something that would be a direct replacement.
view full answer... - Winch Recommendation that Moves Easily to Other SideFor a winch that you can move the handle to the left side you can use # FW16000101. This winch is specifically designed to allow the handle to be installed on either side easily so it would work the best for you. This winch has a much lower capacity though at 1,600 lbs but the crank moves very easily. In the weight range of the Dutton Lainson we don't have anything that easily swaps to the other side.
view full answer... - What are the Base Dimensions for Fulton F2 Trailer Winch # FW16000101I spoke with my contact at Fulton and he said that the actual contact of the base on the Fulton F2 Winch # FW16000101 is approximately 3-3/8 inches by 6-3/16 inches so it will fit your mounting location.
view full answer... - How is Winch Strap of Fulton F2 Winch Accessed to Remove it. On a Fulton F2 winch like the part # FW16000101 you will need to remove the covers on the sides and back with a Torx T25 bit. There won't be tools needed to slide out the pin that holds the drum in place. Once it's out two 1/2 inch sockets/wrenches will be needed to remove the bolt that seats the strap. If it's a version of the winch that does not have the side black panels you'll need to separate the housing instead by removing the lower bolts on the base of the winch.
view full answer... - Will the Fulton F2 Winch # FW16000101 Replace the Winch for a 2008 Ranger Z520?If your 2008 Ranger Z520 has a Fulton F2 winch on it already then, yes the Winch # FW16000101 will bolt in its place. If you have a different winch you may still be able to use the F2 but it may require some modification to your mount.
view full answer... - Replacement Fulton F2 Trailer Winch for Ranger Boat TrailerYes the Fulton F2 trailer winch part # FW16000101 is going to bolt right up in place of the F2 that you have now. It would be a super easy install. What jack do you have on your trailer? If you can let me know that I can see what you might need as a replacement. Or you can get me a picture of it.
view full answer... - How Tall Is the Fulton F2 1,600 Lb Trailer Winch FW16000101The Fulton F2 Fully Enclosed Trailer Winch part # FW16000101 is 6-1/2" tall which you can see in the attached photo along with another measurement as well.
view full answer...
- Overall Dimensions of Fulton F2 Trailer Winch # FW16000101The Fulton F2 Fully Enclosed Trailer Winch # FW16000101 has an overall height of right at 6-1/2 inches. At its longest point, it measures 8 inches. The handle length can be adjusted to either 6 or 7 inches and the winch has a hub diameter of 0.65 inches. I have included an image with the overall dimensions labeled that you can also take a look at.
view full answer...
- Availability of Fulton Hand Winch that Can have Handle on Either Side of the WinchMost of the Fulton hand winches can't have the handle moved to the other side, but if you send me a picture of what you have I can take a look to see if yours is able to do so. For a winch that you can move the handle to the left side you can use # FW16000101.
view full answer... - Replacement Fulton F2 Winch for Broken Winch Drum SolutionI checked with Fulton and the drum of the Fulton F2 winch part # FW16000101 that you referenced is not a replacement part they offer so you'd have to replace the entire winch.
view full answer... - Which Way Does The Strap Feed Onto The Drum Of Fulton F2 Fully Enclosed Trailer Winch # FW16000101? The strap for the Fulton F2 Fully Enclosed Trailer Winch # FW16000101 goes under the drum and through the shaft to secure in place. I have included an image below so you can see this.
view full answer...
- Mounting Dimensions on Fulton F2 Fully Enclosed Trailer Winch # FW16000101The Fulton F2 Fully Enclosed Trailer Winch # FW16000101 referenced in your question has base dimensions, where it contacts the mounting location, of 3-3/8 inches by 6-3/16 inches. It features the industry standard bolt pattern, just like the 2,000 pound # FW20000301, that will allow the winch to be installed on almost any trailer. The two bottom bolts are spaced apart 2-1/4 inches on center, and the top bolt is 4-1/2 inches from both bottom bolts, on center. I have attached a short video...
view full answer... - Recommended Marine Hand Winch For 3000-Lb BoatI have attached a link to a helpful article that explains how to choose the correct winch for a boat trailer. Here is what the article says: Finding the Right Capacity Winch for your Boat Trailer. Boat-size-to-winch capacity is generally 2 to 1 With good rollers and short winching distances, increase the ratio to 3 to 1 With wooden bunks and long winching distances, reduce the ratio to 1 to 1 For example, a 2,200-lb boat generally requires a 1,100-lb winch. If the same boat were winched...
view full answer... - Winch Recommendation for Installing Handle on Either Side of the WinchYes, the Fulton F2 Fully Enclosed Trailer Winch # FW16000101 can have the handle of the winch easily installed on either side of the winch so it should work very well for you. I attached a review video for more info for you to check out as well.
view full answer... - Availability of Trailer Winch that Can Have Handle Install on Both SidesThe winch you mentioned part # 348776 can't have the handle mounted on both sides of it nor can it mount 180 degrees. For a winch that you can move the handle to the left side you can use # FW16000101. This winch is specifically designed to allow the handle to be installed on either side easily so it would work the best for you.
view full answer... - Fulton Hand Winch that Comes with a Strap and HookFulton F2 winch # FW20000301 does come with a strap and hook and is also rated for 2,000 pounds. The similar # FW16000101 comes with a strap but is rated for 1,600 pounds. I have included a link to the hand winches that either come with a strap or that can be used with a strap. Ones that come with a strap will show the strap in the pictures. They come in a variety of capacities as well.
view full answer... - What Is Different Between the 1,600LB and 2,000LB Fulton F2 Winches? The 1,600LB # FW16000101 and 2,000LB # FW20000301 Fulton F2 winches have a lot of different components which allows the 2,000lb winch to be stronger. The case, internal components, and handles are different between these winches. The Top Cover # F500350 is the only part I see which is used on both winches.
view full answer... - Will a Fulton XLT 3,200 lb Winch Fit Mounting Bracket Where F2 1,600 lb Winch Was InstalledNearly all of the Fulton winches can connect to the same mounting brackets as they all have very universal mounting slots. If you have a Fulton F2 # FW16000101 currently the 3,200 lb version XLT # F142425 that you are interested in would bolt right up where the old winch was.
view full answer...
Do you have a question about this Trailer Winch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Shane H
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Michael H.
2/6/2019
Everything is great, very pleased