LED Clearance and Side Marker Light w/ Turn and Reflector - 3 Diodes - White Base - Amber Lens

LED Clearance and Side Marker Light w/ Turn and Reflector - 3 Diodes - White Base - Amber Lens

Item # MCL32ATB

lowest price pledge

Retail:$6.54

Our Price: $5.32

You Save: 19%
Trailer Lights

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.12 lbs

Quantity: 
In Stock
LED Clearance and Side Marker Light w/ Turn and Reflector - 3 Diodes - White Base - Amber Lens Surface Mount MCL32ATB
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Clearance Lights
  • Rectangle
  • LED Light
  • Amber
  • Surface Mount
  • 4L x 2W Inch
  • Non-Submersible Lights
  • Optronics
4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector and supplemental turn function. ABS housing. Surface mount - hardware not included. 3-Wire design. P2 rated. Lowest Prices for the best trailer lights from Optronics. LED Clearance and Side Marker Light w/ Turn and Reflector - 3 Diodes - White Base - Amber Lens part number MCL32ATB can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (6)
  • Q & A (8)
  • Videos (2)
  • Photos
  • Why etrailer?

Optronics Trailer Lights - MCL32ATB

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector and supplemental turn function. ABS housing. Surface mount - hardware not included. 3-Wire design. P2 rated.


Features:

  • LED trailer light functions as a clearance or side marker light when properly mounted
    • Supplemental turn signal function - light flashes when turn signal is activated
  • Built-in reflex reflector removes the need for a separate reflector
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable white ABS housing and acrylic lens
  • Amber lens over white LEDs
  • Compatible with 12V DC systems
  • Surface mount to trailer - hardware not included
  • 3-Wire design with power lead, ground wire, and supplemental turn signal wire
  • DOT compliant
  • P2 rated


Specs:

  • Dimensions: 4" long x 2" tall x 1" deep
  • Distance between mounting holes (center on center): 3"
  • Diodes: 3
  • Power draw at 12.8V: 0.06 amps
  • Lifetime warranty on LEDs


MCL32 Series Dimensions

MCL32ATB Optronics Rectangular LED Clearance and Side Marker Trailer Taillight with Reflex Reflector and Supplemental Turn Signal - 3 Diodes - Amber Lens - White Base - P2 Rated






California residents: click here


Video of LED Clearance and Side Marker Light w/ Turn and Reflector - 3 Diodes - White Base - Amber Lens


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Optronics Trailer Clearance and Side Marker Light Installation

Speaker 1: Today we're going to take a look at and also show you how to install the Optronics Trailer Clearance and Side Marker Light with Supplemental Turn and Reflex Reflector. This LED light offers an amber lens and a white base. Part number is MCL32ATB. Here's what our light's going to look like installed. As you can see, it gives you a very nice bright light. As you can see, those LEDs do a great job of giving us a really good amount of light.

I like the LED look. It seems to be a clearer, more bright light as you see it heading down the road, and there's several benefits that you're going to get to this style LED versus an incandescent. Uses a lot less power. You're not drawing as much power for the same amount of lights. They tend to last much longer so if you constantly find yourself changing a bulb here and there, it's a good idea to get them switched over.

And overall, like we said, just a nicer, cleaner look. You can really update the look of a trailer by putting some new LEDs on it.See in the lens here there's also going to be a reflector that's built into it so if the lights are off, the trailer's parked somewhere, it's still going to remain visible when lights hit that. It's going to light up and let everybody know where we're situated or where the trailer's located.Now, overall from side to side our light measures four inches. From the bottom edge to the top edge we've got two inches. And from our mounting surface to the outermost edge of the lens, it's going to be about one inch.

The holes in the housing are designed on three-inch centers so they're going to work out with all standard lights in this configuration.We're going to begin our installation. We're going to need to of course remove the older existing light or maybe there's just a base there. Hang on to your hardware. Generally, we reuse that with new lights. You're going to notice on the back of this light that we have three wires, so not only is this going to work as a side marker and a clearance light if we mount it up here.

Now, if you are going to mount this on the side of your trailer and you have the need for a supplemental blinker, that's what your red wire is for. So this not only, like we said, can work as a clearance light on the front, 45 it acts as both, on the side it gives us a side marker light, but we can also attach the blinker signal there and allow that to flash. So, it really is a very universal light. It can work out in a lot of situations for you.In our case, we're just doing the side marker and clearance, so we're going to hook our white wire up to ground. We're going to hook our black wire up to the power source. In our case, power source is brown. Ground is our white wire. Now, if you just have the single wire that comes out, that's going to go to the black wire, and you can use a small ring terminal just like this. That'll go on your white wire. Of course, you'll crimp it down properly, and then you just place that right there so as you run down your screw to secure the housing, it'll give you the ground you need.We're going to get ours installed with the two wire configuration. We're just going to strip back the end of each of our leads that come out here. We're going to add on a couple of butt connectors. Now, we're going to use part number DW05743. They're going to be heat shrink butt connectors. These really do a great job of keeping out any type of moisture which eventually leads to corrosion and then to failure. Now, the ends on our light are also going to be pre-stripped but you're probably going to need to trim that back just a little bit. Twist those up really well, and we'll add those into the other side.Now, for these butt connectors we're going to use a heat source. You can see we're using a lighter. You could also use a heat gun, use a little mini torch. You just want to kind of gently heat them. As you do, they'll shrink down. Looks like your wire magnifies. You have just a little bit of clear gel that comes out of the end there. That'll indicate you've got it shrank all the way down. Now our red wire, since we're not going to be using a turn signal, we'll just place in the hole there. If you do, you're just going to make this same connection with your turn signal lead. Place that in. Then we're going to reuse our old hardware. Get that put in place. Once we've got that secured, we can just pop our cover on. Now, to test it you can use either a trailer tester, hook it up to your vehicle. Just need to turn on the running light circuit. And that's going to complete our installation of the Optronics Trailer Clearance and Side Marker Light with Supplemental Turn and Reflex Reflector with an amber lens. Part number is MCL32ATB.


Customer Reviews

LED Clearance and Side Marker Light w/ Turn and Reflector - 3 Diodes - White Base - Amber Lens - MCL32ATB

Average Customer Rating:  4.8 out of 5 stars   (6 Customer Reviews)

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector and supplemental turn function. ABS housing. Surface mount - hardware not included. 3-Wire design. P2 rated.

- MCL32ATB
by:

Great product. 611019



- MCL32ATB
by:

Really tough made product. Not that visible in daylight, but makes the job at night 582920



- MCL32ATB
by:

Was a perfect replacement for the old burned out lights on my Featherlite stock trailer!!! 461145



- MCL32ATB
by:

Bought marker lights w/turn lights & tail lights, all led. First time buyer, had a very good experience from easy order, shipped out that day, received lights quick, have installed on my 5th wheel rv. I will be back next time I need lights 419456



- MCL32ATB
by:

Great lights for the money, took a little time getting here. will probably order more. 387818



- MCL32ATB
by:

I have ordered from this company before and they always have been very fast and efficient in their packaging, speed and customer service. I wished more companies were like George and the eTrailer team. Thank You and Team, I look forward to ordering more items from you in the future. 364448


Comments

This light works great, etrailer always takes good care of me. Thanks for your outstanding service.

Billy P - 04/09/2018

37076
7
7

Ask the Experts about this Optronics Trailer Lights

Do you have a question about this Trailer Light?



Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Written by:
Amy B
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Sarah W
Video by:
Zach D
Photos by:
Jeffrey L
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.