Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Older incandescent lights tend to fade or burn out over time. This 4" x 2" rectangular LED trailer light solves that with three durable diodes under a red lens that stay bright while drawing only 0.06 amps at 12.8V. It’s energy-efficient, long-lasting, and keeps your trailer clearly visible without putting a strain on your wiring system.
Instead of buying separate lights for different uses, this one handles several jobs at once. It works as a clearance light, turn signal, or side marker—making it simple to get the coverage you need. The P2 rating means it’s equally visible from the front and side, adding extra safety and visibility every time you’re on the road.
Even when the LEDs are off, the built-in reflex reflector keeps your trailer visible to other drivers. It reflects light from headlights or street lamps back toward the source, helping mark your trailer’s position in low-light conditions. That extra passive safety feature means you’re covered day or night, powered or not.
Mounting is quick and clean thanks to the surface-mount design and black ABS plastic base. With mounting holes spaced 3" apart (center on center), it attaches easily where your old light was installed. The snap-on acrylic lens makes future replacements simple, and the 3-wire pigtail—power, turn, and ground—hardwires directly into a standard 12V DC system for a solid connection that lasts.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today I'm gonna take a look at this Optronics LED Trailer Clearance Turn Signal or Side Marker Light with the Reflex Reflector in the Red Lens. Now, this is a rectangular LED trailer light that'll function as a side marker light, a clearance light, or a turn signal light. You can see, it is a red lens over three wide LEDs, and it does use a built-in reflex reflector to remove the need for a separate reflector. Now, I have this hooked up to some 12 volt power, and I do wanna show you the light.
So, what we're gonna do, is go ahead and turn on the 12 volt power. And there's your side marker light or clearance light. And then, we'll go ahead and turn off the overhead lights. And if you do hook it up as a turn signal light, you can see that it'll also offer the turn signal function. Now, they do use LEDs.
They do make great replacements for the incandescent lights, 'cause they'll last 50 times longer. They are more efficient, they provide brighter light with less power output, and of course, no bulbs to replace or (indistinct) to break. And the lifetime warranty on LEDs. Now, this is a durable, I'm gonna go ahead and disconnect it from our power here. The base on it is a durable black ABS plastic base.
The lens is a nice, easy snap-on acrylic lens. Very easy to replace. And again, this is compatible with 12 volt DC electrical systems. It is designed to mount onto the surface of the trailer. Now, the hardware installer is not included.
You can see, it offers a three wire pigtail, with the two power leads in the ground wire. And this light is DOT, Department of Transportation, compliant. It is also P2 rated. Few specs on this. The overall length, we'll get our ruler out here and we'll go to the back, overall length from one end to the other is right at four inches long. Height of it is two inches tall. And the total depth of it, one inch deep. Now, the distance between the mounting holes. These are the two mounting holes here that you mount. Center to center on those is right at three inches. And the power draw on this at 12.8 volts will be 0.06 amps. But that should do it for the review on this Optronics LED Trailer Clearance Turn Signal or Side Marker Light with the Reflex Reflector.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Ray
11/27/2017
perfect product
Sf
6/2/2020
A year later and things are still working great, I should have done this sooner!!
John K.
4/17/2022
Update after 12months of use: Product still working as well as they were from day 1, still highly recommended...
Sierra K.
12/15/2021
I am unsure if your trailer used Optronics Brand LED Puck lights, but one thing is for sure these lights have a lifetime warranty for LEDS!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jerry
5/29/2026
After a yr the lights are still performing as they should be