4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with black base. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (78 Customer Reviews)
4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with black base. Surface mount - hardware not included. 2-Wire design. P2 rated.I was initially disappointed with my order because there were 2 items missing (1-MCL32ABB, 1-MCL32RBB). However, I called and the problem has been corrected and now I’m happy with my etrailer parts.
Easy to install once I figured out which wire on my camper was hot and which was ground. Not the light's fault, the builder used black wire for everything. A great product at a reasonable price
The lights are working great. A huge improvement over the incandescent lights replaced. Fast shipment and easy transaction from etrailer.
Replaced taillight with LED so decided to change running lights as well!
I have been building trailers for a while now. When I found etrailer they cut my cost way down. I really haven’t shopped elsewhere sense!
As described. Nice replacement for my old running lights.
Basic trailer side marker light. Works great. No bulbs to get loose or burn out.
I replaced all the clearance lights and taillights on our fifth wheel camper with these OE style LED versions. They are much brighter and therefore much safer, especially in the case of the tail/brake/turn lights seen elsewhere at etrailer. They should last a lot longer than the original bulb units. I also like the way they look as compared to the old bulb style. Our camper was only a year old, and I don't understand why they all wouldn't come from the factory with LEDs. I installed them all myself without issue.
Bright little S.O.B. And should do the trick for my grounding problem. I needed room behind the light to screw the ground wire to the skin of the R.V. Since all I have is one hot wire coming out for placement of the lights. Was told the gap behind the light was 3/8 of an inch but its more like 1/4 inch but should be enough room for a flat head screw with a wire under it. Will use silicon to seal the screw and wire to keep it from rusting, the problem I had with the old lights using the mounting screw to ground the lights to the skin of the R.V. Time will tell if all works out?? As planned.
WOW!!! Am I glad I ordered these to replace the original OEM ones on my fifth wheel camper! I truly am so impressed with these guys, way way brighter than the incandescent ones!!! They were super easy to change out and wire up probably took around five minutes a light. The folks at etrailer.com are AWESOME to work with, very efficient about following up on order received when it ships and when it is delivered! Keep up the great work! Thank you!!!!
The service was excellent.I was a little disappointed in the lights.They are brighter than the incandescent lights I had but not as bright as I thought. They are an exact fit of the lights I removed so I didn't have to drill any new holes.Thank you
I’m very happy with these LED tail lights. Bought them to replace the ones that came on the trailer. They are bright and seem to be of high quality. They were easy to install. The only slight drawback is that it’s a bit tricky to get the wires to lay flat enough against the light to get it to sit flush with the back of the trailer. But in the end it worked fine. I would recommend these as a good replacement for older, smaller, incandescent tail lights.
Items were delivered in a timely manner even without expedited shipping. Items were as described and are a perfect replacement for the current incandescent clearance markers on my RV. I've done business with etrailer multiple times and they have yet to let me down. Highly recommended.
Yet to be installed but appear everything they are advertised. Looking forward to putting them into service as soon as I get a wiring issue with my camper ironed out.
Three diode lights! Exactly what was o rdered.
Replaced all the lights on my car trailer with these. Very happy with the light output and the look.
Perfect. Exact replacement.
The lights were as described. They were easy to install and lit the area up quite well.
The lights are great! Perfect fit, exact mounting hole alignment and much brighter than before. Susan was fantastic and extremely helpful. A person could not ask for a better service representative. I give etrailer and Susan 5 stars plus. I'm truly an etrailer fan and they are good managing exchanges if an item doesn't fit, etc. You won't do better than etrailer.
Fast Service, Great product.
I have ordered several times from etrailer and both times have been very satisfied with their service and the products. I have several different trailers, stock trailer, flatbed utility trailer, small bumper pull camper and a 5th wheel camper and for every one of these trailers, if I need parts I first look to etrailer.
Bought this as part of a complete trailer refurb. Nice product. Sales rep was very polite and helpful.
Very quick on the shipment and very easy to install. They are really nice and bright which is what I was trying to achieve on my 5th wheel . I installed all clearance and running lights, couldn't beat the price and quality. I don't have any pictures but when I plugged it in (full sun) and backed away from rear the lights were bright! I am thoroughly pleased.
Fit was exactly the same as factory lig hts.
this is an exact replacement for the 5 lights on the back of my 2000 chinook concourse rv at a reasonable price. fast shipping.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.