Is There a Black Base for the LED Clearance and Side Marker Light

Question

Question:

Does clearance light with turn signal part # MCL32ATB come with a black base?

asked by: Mark C

0

Expert Reply:

The LED Clearance and Side Marker Light does come with a black base, part # MCL32ABB.

expert reply by: Conner L

0

Answer 1

You'd have to remove the lens of the part #MCL32ATB and install the lens part #A32RB as there isn't a red version of the light.

view full answer...

Answer 2

You will want to get under the hood of your 2020 Toyota Tundra and find the 30A TOW TAIL Trailer side light fuse in the #9 position. This is what will control the power going to your 7-way way harness. This fuse is either missing, blown, or there is…

view full answer...

Answer 3

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

view full answer...

Answer 4

Hey Mitch! The Replacement Shark Fin Camera Mounting Bracket #FRCBRKT-BL is compatible with different cameras, but we don't have a list of what all it fits with, and Furrion will only say it works with their cameras. We actually have a review…

view full answer...

Answer 5

While I don't know the exact functions of the wires on your trailer that you'll use to wire up the camera of the Furrion Vision S part #FOS07TASF that you have I can definitely help. You will need a circuit tester like the part #PTW2993 to…

view full answer...

Answer 6

Based on the sharkfin camera mount in the picture you provided I can tell you that your 2021 Amerilite 189DD was prewired for Furrion cameras #FRCBRKT-BL. Because of this you won't be able to find an adapter but can cut the plug-in off of the…

view full answer...

Answer 7

Hello Joe, thanks for reaching out. We do offer the parts you are looking for re-wiring your trailer, but we would not have everything as a full all-inclusive kit. What I recommend is a 7-way with junction box, then you can use jacketed 7-wire, or…

view full answer...

Answer 8

Trailer fenders are classified by the diameter of the trailer wheels they're compatible with. For instance, the #F008583 fender you referenced works with 13 inch diameter wheels. If you're unsure of the diameter of your wheels, the last two…

view full answer...

Answer 9

Your Goodyear Endurance Tire is the ST225/75R15 size that you are looking for. This has a load range of E (2,860 lbs at 80 psi) and a max speed of 87 mph just like what you currently have. For a wheel I recommend the Dexstar Steel Mini Mod Trailer…

view full answer...

Answer 10

From the measurements you provided, the Lippert Road Armor #LC696740 is going to be the better option. You will also need the #LC64FR to complete it. This will include wet bolts and all shackles, but they will be a little shorter at 3 1/8 inches.

view full answer...

Answer 11

I took a caliper out to our warehouse and measured the Replacement Spring for Ram Sleeve Lock Couplers part #CA-5196-SPR for you, the length is 1.68" and the diameter of the coil is .040".

view full answer...

Answer 12

I looked up your old DF-IS001 light switch and found it is a simple 12v DC light switch such as the Mini-12v Switch #37213645 you were looking at. As long as the switch you choose is rated for 12v DC power and is the same dimensions it will work just…

view full answer...

Is There a Black Base for the LED Clearance and Side Marker Light

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching