To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Install these replacement lights in your Westin Perfect Match Series bumper (31000, 31001 or 32000), or your Surestep or Diamondstep Series bumper to illuminate your license plate. Kit includes 2 housings with bulbs, hardware and wiring.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this replacement chrome license plate light kit for your Westin bumpers. This part will let you install these two lights in your Westin Diamondstep, Surestep, or Perfect Match rear bumper, to illuminate your rear license plate. It will work with the Diamondstep, the Surestep bumpers, but it also fits the Perfect Match bumpers part number 31000, part number 31001, and part number 32000.Basically, this will tap into your vehicle's running light circuit to supply the lighting for your license plate. Includes all these parts laid out here on the table, includes the two chrome plate of light housing with the mounting clips to install them.
They just slide on there and snap into place, holds them in the place. Comes with the wiring harness with the two wire taps to tap into your running light circuit. Comes with the two bulbs that install into the sockets here and install into your light housings. It also includes the license plate mounting hardware. But that should do it for the review on this replacement chrome license plate light kit for the Westin bumper..
Average Customer Rating: 4.8 out of 5 stars (128 Customer Reviews)
Install these replacement lights in your Westin Perfect Match Series bumper (31000, 31001 or 32000), or your Surestep or Diamondstep Series bumper to illuminate your license plate. Kit includes 2 housings with bulbs, hardware and wiring.The replacement parts in the rear license-plate-light kit was a perfect match for my 1992 Chevy sportside pickup. The old light sockets and wiring would not function. It was easy to swap in the new parts. The lights work perfectly. The parts in the kit matched the items in the picture supplied at etrailer’s site. I am very happy with the results. The price for the kit is the best I could find. Many places wanted to sell just one light socket for more than etrailer’s complete kit price.
Very happy with this light kit.If you order a bumper make sure to order the light kit, it looks great on my 73 square body truck.
A year ago I ordered the kit to replace the license plate lights on my 2004 Nissan Titan. The kit fit perfectly and was very easy to install. Very confident these lights will last for a good long time. Would not hesitate to use etrailer for future replacements I might need. Thank you Korren for the great service. A great experience!
Well,
I took a chance to buy this bumper thinking it just might fit my 1965 Ford F100 truck. The listing said it would not.
Guess what, IT FITS GREAT!
It is perfect, looks great and I am very happy with the quality!
Thank you!!!!
Dave
Good product. Only thing is clip broke that holds on of the lights in. I’ve been trying to look for replacement but with no luck. All in all it’s a good product.
This License Plate kit is an excellent replacement!
I bought this for my 05 Nissan Xterra SE 4x4 as one of the bulbs shorted out and melted the socket. Apparently Nissan does not sell a replacement harness for this year truck, only the lens. There is a kit for the 2006-7 and up - so oh well (another annoying issue w/ the mfr). To my surprise, the bumper is an exact match for Westin type bumpers. The lens and clips match up to the bumper, and the harness all you have to do is splice the 2 wires into the existing one. It solved the issue of not driving without a light out and not getting a ticket in NY. The bumper is metal so the chrome lenses give the re-painted bumper!
Thanks for a great product!
The light housing is too easily broken. I've broken two in the last year. Cheap plastic.
I have not received the correct parts. On the phone now with customer service to find out why they shipped me two door assembly covers instead of license place lights. Who does that?
I reckon I will change my review once I get the correct part minus a star for the delay.
I ordered a License plate light replacement kit. The lights themselves look great but the wiring harness was short and I had to splice wires to make it fit. They work great now but would not have without the splice. It would have been too much hassle to send them back so I just took care of the problem. Wasn't plug and play as I had hoped.
Gary - 04/09/2019Good quality. Lights work fine and finish look new after 1 year. Worst part of installation was limited access to the back end of the lights due to a frame mounted receiver hitch just below the bumper. I've ordered things from lights to hitches from etrailer over the years with no issues. Thank you!
I was extremely pleased to be able to even find the part I needed at your store. When I called to be certain the part was in stock, the staffer was informative and very helpful. Although receipt of the part from your location in the southern U. S. to my location on the east coast of Canada took more time than I understood, it got here in good shape. I am very pleased with your service and prices.
Exactly what I needed and the only place I could find something so simple and reasonable!
After much searching for plate lights for my 97 Nissan truck I finally ran across these. They fit the truck perfectly and the ordering was easy and they were shipped in a reasonable time. I will definitely shop here again.
I saw a review that said this fit a 2004 Nissan Titan and can confirm it does indeed. Even though the compatibility tool will show it as not compatible, it is a perfect fit. It clips into the bumper nice and tight, looks original. Which is nice, because the Nissan part has been discontinued for that model year as I understand it. The chrome light housings are identical to the Nissan OEM version and the light sockets are of the same type and bulb. Installation is easy, but instructions aren't provided. Use Youtube for installation videos to learn how to do it.
My original license plate light assembly finally wore out after 12 yrs of use. Yes, my 2006 Dakota SLT Quad is still running as if I just purchased it yesterday. I was extremely impressed that the replacement assembly worked and fit as an OEM. I simply snipped the easy disconnect from the original assembly and spliced it into the two lead crimp connectors on the replacement. Taped up connections and reinstalled all within 60 mins. I would recommend this dealer for your OEM type replacement parts. I also like their price guarantee and replacement details. Happy camper I am.
Very reliable delivery.
seems to be good quality, they only fit aftermarket bumper for ford f150. i feel the scotch locks shouldn’t be included, all connections should be soldered or heat shrink butt connections. i have fixed too many scotch lock connections that have caused too many problems. anyways they fit nice and the harness included is fair. the connection inside the loom are crimped but only wrapped in tape.
I really just bought this for the license plate lamp shades for a 2006 Nissan armada and they fit perfect. The kit also includes Two bulbs which I used to replace my old ones.
Shipping was extremely slow, but other than that, it was good
Item was as described and fit good along with fast shipping and a good price
2000 nissan frontier
Everything you need and don't need is included in this kit. Great quality.
My only gripe is the harness between the lights is just barely long enough to work. If it had a little more slack I would be happier but it still worked just fine. No regrets buying this product.
Product was exactly what I need for my 93 Chevy Silverado Z71 haven't installed it yet but check everything and it's okay arrived a day earlier than should have very fast delivery thank you so much
Perfectly and easily Assemble and insta ll
Seller has a great price and fast delivery of high quality merchandise . I will be a repeat customer.
SFC Morphew, Mark C.
United States Army Aviation
Fort Rucker, AL.
Product was delivered in a very timely matter, fit perfect in my '95 F-150 with no issues!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.