Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base
(555 reviews)
Price: $3.72
In Stock
Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base
Item # MC32AB
Retail:$14.83
Our Price: $3.72
You Save: 75%
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (555)
- Q & A (0)
- Photos
Optronics Trailer Lights - MC32AB
- Clearance Lights
- Incandescent Light
- Amber
- 4L x 2W Inch
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Optronics
4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Amber acrylic lens with reflex reflector. Surface mount on 3" centers - hardware not included. Twist-in bulb socket. P2 rated.
Features:
- Rectangular trailer light serves as either a side marker light or a clearance light
- Amber acrylic lens with reflex reflector
- Lens is replaceable
- White ABS plastic base
- Incandescent bulb
- Mounts on surface of trailer - hardware not included
- Twist-in bulb socket with power lead and ground wire
- DOT compliant
- P2 rated
Specs:
- Dimensions: 4" long x 2" tall x 1-1/8" deep
- Power draw at 12.8 volts: 0.2 amps
- Mounting hole dimensions:
- Center to center: 3"
- Mounting hole diameter: 1/4"
- 3-Year warranty
Note: A hole must be drilled on the mounting surface for routing the wiring and for the base of the bulb to sit into.
P2-Rated or P3-Rated Lights
A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MC32AB Optronics Rectangular Side Marker/Clearance Trailer Taillight with Reflex Reflector - P2 Rated - Amber Lens - White Base
Alternate part number: MC-32AB
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base - MC32AB
Average Customer Rating: 4.8 out of 5 stars (555 Customer Reviews)
4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Amber acrylic lens with reflex reflector. Surface mount on 3" centers - hardware not included. Twist-in bulb socket. P2 rated.by: 01/02/2024
Items arrive broken because they put them loose in the same box with spring hangers!
by: John 02/13/2024
Perfect fit to replace the cover of one on our 2017 Micro Lite. Thank you!
by: Texas Badger12/31/2016
I have bought many products gor our camper from etrailer from hitchesyo lihht bulbs. Always great service at reasonable prices, usually 30 to 50% lower than local RV dealers.
Texas B.
1/2/2018
The lights are great.The only problem Ive had is there is no built-in backup warning to keep me from backing the trailer into things and breaking the lens. LOL
by: Gregory03/27/2013
These lights are really good for the price! (I ordered 16)
They aren't cheap feeling or flimsy.
They feel sturdy, durable and they look quality.
The wires are the correct gauge and the light bulb is in a rubber grommet for weather sealing.
The light is sealed very well and it takes some effort to remove the lens cover.
The lens is thick and the color is true. The reflector is bright.
I was genuinely impressed with lights especially for the cost.
These will be replacing older side marker and clearance lights on my older 1985 Sunstream motor home.
My lights are faded, some broken, mostly leaking and more costly to replace than what they are worth.
These MC32RB and the Amber version lights will look great!
Slightly different style, same size and better looking and better quality than the originals.
Very happy with lights and etrailer.
Will be ordering more items.
Thanks.
G.
by: April 04/29/2024
Perfect fit and we received them quickl y.
by: Phil M07/15/2017
I purchased red and amber lights to replace the faded and broken ones on my travel trailer. Camping World wasn't able to help me. Found you all while searching the internet. Great produce. Great price. Better than the originals. The screws that secure the lights to the trailer are protected from the weather (they are under the removable lens. Easy to install. Ended up replacing all eleven lights.
Phil M.
7/15/2018
Work and look great. Again, installation was easy.
by: Ron 02/07/2024
My new light looks EXACTLY like the ones installed twenty three years ago. Hu
by: Chuck 02/07/2024
Received on time and was the correct part. Will use them again.
by: James10/23/2023
Lights area perfect match for the existing ones on my travel trailer.
by: Nancy03/22/2024
Fit perfectly
by: Jon08/03/2023
1 of the 2 trailer lights was missing the bulb
by: Harvey 09/09/2023
great part fit perfect price was very low will must definetly use e-trailer for all my trailer parts
by: Leroy09/01/2023
Good price and arrived when etrailer said it would. What more can you ask for?
by: Angela W.07/11/2013
Tracking let me know when to expect these. They arrived on time, and in good shape. Installed them, and they work great. Bright bulbs, simple install. Great price too! Thanks again!
by: Mark B02/14/2024
Awesome service!
by: Jack05/04/2020
I ordered 7 lights for my trailer and was pleased with the lights and the quick delivery.
by: Vincent 07/07/2023
E trailer has always treated me excellent. Itis the first place I check when I need something
by: Roy 04/25/2023
The receipt of the trailer reflective light received today (2DAYS) before expected made my 82 year old life a lot easier. Now I can pass inspection before my registration runs out. Thanks to all involved you made an old man very "HAPPY"
by: Steve 11/15/2023
As advertised
by: Ed07/22/2022
Just as expected. Thank you.
Ed G.
7/23/2023
Still looking good.
by: Mike06/07/2023
Glad I found etrailer! great service..
by: Rich S.09/11/2017
I have a trailer that did not meet DOT Regs. I needed to install amber side lights. Your amber light mc32ab was just perfect for what I wanted. Very low price and the light fit on the side of the trailer with no problem. Very good light for the money.
Rich S.
9/12/2018
I have had no problem at all. The light holds up well and still looks new.
by: TECTim03/14/2017
I ordered this part to replace a broken one on my 5th wheel RV. It fit perfectly. Great price and delivered within just a few days. I only wish it was made in America.
Tectim
3/14/2018
Still working. It looks just like the original light It replaced.
by: Mark 08/24/2023
Just got my product today. Ordering and shipping was fast and easy. Price was excellent. Thank you.
25
555
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Replacement Amber Lens For A 2019 Forest River Salem Cruise Lite TTThe SAE number is often not a super reliable source of information when it comes to finding a replacement. However, if the lens you're needing for your 2019 Forest River Salem Cruise Lite Travel Trailer measures : 4" long x 2" tall x 1/2" deep, then you can use the: Replacement Amber Lens for Optronics MC32 or MCL32 Series Clearance or Side Marker Trailer Lights # A32AB. If not, then I recommend just swapping the entire light out with the Trailer Clearance or Side Marker Light w/ Reflex...
view full answer... - Optronics MC32 Series Amber Light with Black BaseYes, I checked with Optronics and you can get the MC32 series amber light with a black base, # MC32ABB.
view full answer... - Recommended Type & Size of Installation Hardware for Optronics Side Marker Light MC32AB The type and length of mounting screw to use to install the Optronics Trailer Clearance or Side Marker Light # MC32AB will depend largely on the nature of the mounting surface. If there is wood behind the trailer's outer skin at the mounting point then use wood screws long enough to securely grab that material. If the underlying material is metal then use sheet metal screws. If you are using existing holes in the trailer then that may determine the size of fastener you need to use. The...
view full answer... - Recommended Replacement Lens For Optronics Clearance or Side Marker Light MC32ABI pulled one of the Trailer Clearance or Side Marker Light, part # MC32AB from our warehouse. You can remove the lens by using a very small screwdriver and prying it. I recommend moving the screwdriver along the seam to make sure you do not break the lens on the light. Once you have the lens off you can order a replacement like part # A32AB. You can just snap the replacement lens back in place. The mounting holes are inside the assembly, so if you need to replace the light assembly...
view full answer... - Replacement for Reflect-O-Lite 400The Reflect-O-Lite line has been discontinued for quite some time so replacements are no longer available. However, the Trailer Clearance or Side Marker Light w/ Reflex Reflector part # MC32AB is a very similar option that will work well in its place. In regards to installation, all you will need to do is mount the base with a screws part # 1131832 and then match up the wires with butt connectors part # DW05744-5.
view full answer... - Need Replacement Lenses for 2003 Coleman TrailerFrom the dimensions that were given and the picture that you provided, it looks as though the Replacement Red Lens, # A32RB, and Replacement Amber Lens, # A32AB, would work for you. These lenses measure 4 inches long, 2 inches wide, and 1/2 inch high. The number/letter combo, P2 A 99, that you mention is more than likely the SAE, Society of Automotive Engineers, number. The SAE number is not the part number of the light, it is just a number on the lens that means that lens has passed SAE...
view full answer...
- Would the Bargman LED Upgrade kit part # 47-59-012 work on an Optronics Light part # MC32ABThe Bargman LED Upgrade kit part # 47-59-012 that you referenced will work on a 2x4 inch Optronics light like part # MC32AB. I went an pulled both of these parts from our warehouse to test for compatibility and it worked just fine.
view full answer... - How to Install Trailer Light part # MC32AB to a Trailer with a Single Power WireSounds like you bought the # MC32AB and the # MC32RB to replace what you have on your trailer. This is the only style of light we offer in that size. It sounds like your trailer may ground it's light assemblies through the mounting hardware. Which in this case would mean that you would only need to run the ground wire of this light to the mounting hardware and the other to the power wire of your trailer's wiring.
view full answer... - How to Install an Amber Turn and Parking Light on a Trailer with Combined Brake and Turn SignalsMany people inquire about wiring a trailer in the way you describe, and it is possible, but you will need to use a vehicle to vehicle taillight converter, part # 118158, to accomplish this. The converter will be wired inline on the trailer wiring and will break out the turn and brake circuits. I attached a drawing that shows how I would go about wiring this converter on a simple 4 wire trailer. You would just need to cap off the red wire on the output side of the converter and tie that...
view full answer...
- How to Use an Amber Turn Signal Parking Light on a Trailer with Combined TaillightsWhat you are going to need to install the Trailer Turn Signal and Parking Light # MC32AB that you referenced is a Vehicle to Vehicle Taillight Converter # 118158. This product will wire in on the trailer wiring and will split your tail light circuitry so that the blinker and brake light circuits will be separate. Here is how it will wire in. You will run the ground wire from your trailer 4-way to white wire of the box, the left turn/stop wire to the yellow wire and the right turn/stop...
view full answer... - Replacement Lens Needed For A Bargman SAE P2-58-59 Amber Clearance Light We unfortunately no longer offer the replacement lens for this light so the only thing I can offer would be a complete replacement with the Optronics Trailer Clearance or Side Marker Light w/ Reflex Reflector # MC32AB. You could possibly use the replacement lens # A32AB for this light on your current light, but with the price being virtually the same I'd go with the full light just in case the lens doesn't fit you can just swap out the light and have zero down time waiting for a new light...
view full answer... - Amber Clearance Trailer Light to Match Optronics # ST31RBWe don't carry an amber light that's the exact as the # ST31RB but one that is quite close is # MC32AB. Another option is to replace the lens with # A30AB which is the amber lens that fits the # ST31RB.
view full answer... - Solution for Replacement Mounting Plate for MC32AB Trailer LightsThe lens # A32AB, bulb # A194B, and gasket # A32GB are the only replacement parts available for the # MC32AB clearance lights. Unfortunately this means the only way to replace that mounting base is to replace the entire light.
view full answer...
- Does Wiring Polarity Matter for Installing Optronics Clearance or Side Marker Light MC32ABYes, the Optronics Trailer Clearance or Side Marker Light # MC32AB can be wired with either of its two black wires used for ground or for power. Since this is a single-function/single-bulb light it does not matter which is which. For a replacement incandescent bulb for this light you can use part # A194B which is a 194-type standard bulb.
view full answer... - Do the Clearance Lights MC32RB and MC32AB have GasketsBoth the # MC32RB and the # MC32AB do not have foam gaskets between the lens and the base. It is unlikely but possible that your current trailer lights had lenses that were once color and have now faded to being totally clear.
view full answer... - Replacement Lens For Amber Clearance Lights On 2005 KZ Jag CamperSince there are so many different lights that are used on trailers it is nearly impossible to track down what lights are used on a specific model. You may be able to find the manufacturer and model number on the base of the light and that would help us research and see if we can find a replacement lens. Another way is if you measure the lens and let me know as well as how it is attached to the light. A third option is to replace the light. A lot of customers choose this option rather...
view full answer... - Should I Use Adhesive To Keep The Lenses From Falling Off Of the Optronics Clearance Light MC32ABWhile you should not have to use adhesive to get the lens to stay on the # MC32AB, you could use a bit of a silicone sealant to keep the lenses stuck on and sealed. That way you could probably peel of the sealant without too much trouble if the lenses need to be replaced. With any stronger adhesive I would be concerned that you would not be able to remove the lens without damaging something.
view full answer... - Replacement Trailer Clearance Light with part # AEP2 58-59 Stamped on ItBased on the number you listed and the fact that you referenced the Rectangular Trailer Clearance, Side Marker Light with Reflector # MC32AB it sounds like you have a 59 series clearance light on your trailer that you are trying to replace. If the light on your trailer looks like the # MC32AB and is 4 inches long by 2 inches wide the # MC32AB would work great as a replacement. I attached a review video for this light for you to check out also.
view full answer... - Will Amber Lens fit 2016 Heartland North Trail?The Trailer Clearance or Side Marker Light # MC32AB may fit your 2016 Heartland if the mounting hole dimensions are the same. This light has 3" center to center mounting hole dimensions and a 1/4" mounting hole diameter. I've added links to video reviews of this light for you to take a look at.
view full answer... - Are Separate Ground Wires Needed to Install Multiple Optronics Trailer Lights # MC32RB and # MC32ABAs long as your trailer is not aluminum or fitted with a folding tongue mechanism you should be fine running each light's ground wire to the trailer frame. You'll want to make sure that you have a clean bare metal surface on the frame for each light's ground. Each one needs to make solid metal-to-metal contact. By the same token, you will want to ensure that your main trailer wiring harness ground wire is also solidly affixed to a clean bare metal spot on the frame, since this wire will...
view full answer... - Troubleshooting Trailer Light Malfunctions on a Cargo Trailer Pulled by a 2004 Chevy VentureIf a traditional converter is not enough to power the all of the lights on your trailer (usually if there are too many lights, some of them might rapidly blink or not power on or be very dim), you would need a powered converter like the # C59496, that has a separate connection to the vehicle battery to power the lights. The power would then come from the battery and not from the vehicle wiring or the converter. That direct connection to the battery is more than enough to power the lights...
view full answer... - Replacement Red and Amber Clearance Lights to Use In Place of Kaper II 1A-S-20 LightsThe 1A-S-20 lights are Kaper II lights that we do not carry but they should have the same 4 inch by 2 inch measurement as # MC32RB and # MC32AB. The replacement red lens is # A32RB and for the amber light the replacement lens is # A32AB. I have linked video reviews of both lights for you.
view full answer... - Utility Trailer Light Wiring Diagram and Required PartsI have attached two basic trailer light wiring diagrams of utility trailers for you to check out. The difference between the two diagrams is the type of wiring harness that is being used. Diagram 1 shows a traditional wiring layout with jumper wires to provide running light functions for both sides of the trailer and Diagram 2 shows a wishbone harness. The wishbone harness has two running light wires, one for each side of the trailer. Diagram 2 is the preferred method and it is more common...
view full answer...
- Recommended Marker Light For Fenders On 1999 Pace WorksportI don't have the specs for your specific light as manufacturers constantly change lights, but I can make a recommendation for you to replace what was ripped out. I see two different colors online, so I'll give you an option for an amber light and a red light. For an amber light, I recommend the Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base, # MC32AB. This light is 4 long x 2 tall x 1-1/8 inches deep. It is a surface mount with a twist-in...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Amy B
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
1/11/2024
Oh that is not good to hear! Lets get you over to customer service for them to get this corrected for you.