Replacement for Reflect-O-Lite 400

Question

Question:

Im looking for five Reflect-O-Lites part # 400 complete with amber cover for replacement on a 1988 Shasta Motor Home.

asked by: Paul M

0

Expert Reply:

The Reflect-O-Lite line has been discontinued for quite some time so replacements are no longer available. However, the Trailer Clearance or Side Marker Light w/ Reflex Reflector part # MC32AB is a very similar option that will work well in its place. In regards to installation, all you will need to do is mount the base with a screws part # 1131832 and then match up the wires with butt connectors part # DW05744-5.

expert reply by: Conner L

0

Answer 1

Your exact light isn't available anymore but we have found that the #MC32AB and the #MC32RB are very similar to what you are looking for and will work well.

view full answer...

Answer 2

Thanks for the picture of your actuator that you are wanting to replace. The Demco Hydraulic Actuator part #DM8609502 would be a great option as it is designed to fit A-frames like yours. It has an 8k capacity, designed for a 2 inch hitch ball, and…

view full answer...

Answer 3

the Reflect-O-Lite 400 light has been discontinued for quite a while so there isn't going to be an exact replacement. Instead, the closest replacement lens we have is the Replacement Amber Lens for Optronics MC66 Series Clearance or Side Marker…

view full answer...

Answer 4

For an exact replacement to what you sent in a picture of we have the part #MCL31RB for a red taillight and part #MCL31AB for an amber light.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Replacement for Reflect-O-Lite 400

Products Featured in This Question

Continue Researching