Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans
(457 reviews)
Price: $64.50
In Stock
Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans
Retail:$102.80
Our Price: $64.50
You Save: 37%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (457)
- Q & A (0)
- Videos (1)
- Photos
Dometic Accessories and Parts
- RV Vents and Fans
- Roof Vent
- Motor Parts
- Motor
- Dometic
Replaces the bow-tie bracket, motor, and blade for your Dometic FanTastic roof vent fan (FV800800, FV801200, FV801250, FV802250, FV803350, FV807350, or 7300 Series).
Features:
- Replaces the bow-tie bracket, motor, and blade for your Dometic FanTastic roof vent fan
- Works with FV800800, FV801200, FV801250, FV802250, FV803350, FV807350, or 7300 Series
- 2-Wire design hardwires to 12V power source
- Includes bow-tie bracket, motor, and fan blade
K8017-00 Replacement Fan Motor Assembly Kit for Dometic Fan-Tastic Vent Roof Vent Fans
Item # FVK8017-00
Video of Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Fantastic Vent RV Vents and Fans FVK8017-00 Review
Speaker 1: Today we're going to be taking a look at the replacement fan motor assembly kit for Fantastic Vent Roof Vent Fans. This is going to replace that original vent fan that came with your Fantastic Vent Roof Fan. It's going to have al the same specs as that. It does have the motor already attached with the bowtie bracket on the back. You'll just need to secure that in place on your vent with the screws that came with your kit. There is no hardware that comes with this, so you will have to replace either with the original hardware or pick up some on your own.Has the two wires for your power and ground hookup.
They already come with butt connectors on them, so that's one last step you have to do. This does have to be connected to 12 volt power. As far as the measurements for this fan, from the mounting hole on either side of the bowtie bracket, center on center, that's going to be 11 and a 16th inches from the height of the mounting holes themselves, that's going to be five and 5/16th inches. From the inside edge to inside edge of that bracket, that's going to be 12 and 5/8ths. You can see a little bit better if I hold it in front maybe.
The fan diameter itself, that is going to be 11 and 3/8ths, so that gives you an idea of what that should bit, but it will work with the Fantastic Vent Roof Vans. You can check those part numbers out on our website. This will be a direct replacement from Fantastic Fans, so it should work out well.That's going to do it for our look at the replacement fan motor assembly kit for Fantastic Vent Roof Fans.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Defective
- Product did not meet expectations
Customer Reviews
Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans - FVK8017-00
Average Customer Rating: 4.7 out of 5 stars (457 Customer Reviews)
Replaces the bow-tie bracket, motor, and blade for your Dometic FanTastic roof vent fan (FV800800, FV801200, FV801250, FV802250, FV803350, FV807350, or 7300 Series).by: Cory 11/27/2022
Haven’t installed it yet but I’m guessing it won’t be an issue. Wasn’t sure if this one deserves a 4 or a 3. Reason is the finish on the plastic is not the same quality as the original fan from Fantastic. The frame section has the flashing that you get sometimes from injection molding. I don’t think it will effect the operation as the fan blade looks fine. I might try to salvage the Fantastic frame and use it again. As I mentioned I have not installed it yet so don’t know if the motor works but I’m sure it will.
by: Paul07/04/2021
Received correct part, installed easily, works perfectly. Thanx.
Next, need to order new screen and vent cover.
Paul H.
7/5/2022
Had been working great since I installed. Definitely would recommend.
Brian D.
7/14/2022
The motor seems MUCH smaller than the original. Just curious if this is the right assembly because Its so different.
Heather A.
7/16/2022
It depends on which fantastic vent you have if this is the correct replacement fan blade and motor. This part does fit a variety of years of vents so it is very likely that the original motor on your vent was larger than the replacement. There should be a sticker on your vent assembly, if you let me know the model number I am happy to confirm if this replacement part will work.
by: Marnix11/20/2023
Nice new fan motor assemblies for some pretty old roof vents.
Got the parts in 3 days, etrailer is the place to get your RV parts!
by: Walter08/03/2023
My original Fantastic Fan purchased on Amazon failed after only a couple month. Very disappointing since it was a major installation on my cargo trailer. Fortunately etrailer carries replacement fans. Amazing product inventory for sure. The fan arrived in perfect conditions and was relatively easy to install. Now fingers crossed this one last longer than the original. Fantastic Fans I've had on previous RV's never had a problem.
by: C/O10/06/2023
The motor works well, however the fan blades after a bit of running the fan, cracked and a section broke off. Ducted tape the entire outside of the fan and it seems to still be working well. Would like to find just the replacement fan blade but can't seem to find the part anywhere.
by: William07/13/2019
Unit arrived sooner than promised. Installation very easy and done from the top. I removed the large vent cover (7/16" socket) then the four screws on the bow-tie. The old unit lifted out but I had to loosen the black (white) lead on the "vent closed" cutoff switch and move it out of the way. The new unit dropped in, bow-tie holes matched perfectly and after putting in the screws, I cut the wires and used the crimp connectors on the new fan to connect to the fixture wiring. I used cable ties to fasten the leads to the bow-tie arms and to gather excess wiring to keep it out of the way. Tools needed: 7/16" socket to remove and install the hood, #2 phillips screwdriver, wire cutter, knife to trim wire, and plier to crimp connector. See pictures. Fan motor does make a different sound than the original but it works and the old one didn't. The fan itself is also about 1/2" less diameter but that doesn't seem to have made a difference in effectiveness.
by: Cathi09/07/2022
Went right in, works great. We've had nothing but good experiences with etrailer.com
Cathi
9/8/2023
Its been a year and still going strong!
Mike L.
11/1/2023
@Cathi We're glad to hear that, thanks!
by: N Crowe08/23/2020
Was able to install into original 1967 vent, by making a mount with some aluminum angle. Quality original fantastic fan part
by: Louise09/26/2022
It was not the item that would work for me . Returned it seemed to be of good quality. Ordered a complete fan instead.
Louise
10/8/2023
Great
Mike L.
10/25/2023
@Louise We're glad to hear that your # FVK8017-00 replacement fan assembly is working well for you!
Louise
10/25/2023
Fantastic love it
by: Carl 12/01/2023
Easy replacement reasonable price
by: Larry 09/08/2023
It is a perfect fit but it didn’t work not the new fan but something else is cause. I don’t know why but I think it is possible the board it self. Would order again but I have sold the Motorhome and not my problem.
by: Jonathan C08/27/2022
Drop in replacement for the original Jan '08 model 8000 Fan-Tastic Vent fan in my Fleetwood class C. Wires were black & red. My coach wires were blue & black. Attached black to black & red to blue and it worked great. Screw holes lined up though the fan diameter was slightly smaller than the original. The old one was white, the new clear.
by: Daniel12/01/2022
Great prices and great shipping
Daniel
12/2/2023
Working perfectly!
by: Derek05/14/2023
Received the “Fan Motor Assembly” and after paying a little over $100 to have it installed, the technician turns it on and the plastic fan blades are warped and it makes an awful scraping sound.
A lot of wasted money on this item!
Very disheartening!
Jenny N.
5/18/2023
I would like to reach out to the manufacturer to see if there are any fixes I can offer. I know that since this is model specific to the FV800800, FV801200, FV801250, FV802250, FV803350, or FV807350 models. Which model do you have?
by: George 07/06/2022
This is an exact replacement at a good price.
George
7/7/2023
The fan works fine, and I actually ordered two so I would have a spare. I have 3 of them in my 43ft rv, and now the original one in my master bath needs replacement. The one you shipped was an exact replacement, and installation was no sweat. Especially since my son did it!
by: Joseph 10/06/2023
etrailer has always supplied me with quality parts.
by: Stephen 10/18/2022
Quality piece
Stephen
10/19/2023
Still working great. A quality product.
Mike L.
11/9/2023
@Stephen Awesome, we're glad to hear that your # FVK8017-00 replacement fan is working well for you!
by: Pete07/07/2023
All good - great customer service. prompt delivery and product matches the broken fan element in our van. I look forward to replacing it this weekend. Thanks to eTrailer for all of your help with this replacement job!
by: Mike 07/01/2023
Excellent product. Easily replaced old broken fan without having to by a whole new unit.
Really appreciated the simple videos on installation.
Great service.
by: Gabe 08/31/2022
Great customer service!
Gabe
9/1/2023
I have a lot of hours on this fan and it is still quiet and working flawlessly!
by: Paul 08/17/2022
Seem less install. Quiet. Blows air!
Paul
8/18/2023
A year later, this thing is chugging! I’ve spent the summer in NE and haven’t had to use the AC, the fam is quieter than the previous and moves CuFf of air like nothing. Can I add a star?
Mike L.
9/7/2023
@Paul Awesome, we're glad to hear that the # FVK8017-00 fan has worked well for you!
by: James 08/31/2023
Just installed last night, an easy swap with direct replacement.
by: Neil08/02/2019
This is the original Atwood equipment, not a copy. I am using it to retrofit into the original vent on a 1967 Airstream Globetrotter. Attached photo is the fitment trial, it should be perfect. I have 1-1/2 inch aluminum angle to make mounting brackets to use the original holes in the Airstream and the fan. Will probably use a radiator mounting kit to install it on springs.
by: Malcolm02/02/2020
Easy installation! The fan blade was about a half short in diameter but the bug screen covered it up. A manual didn't come with the shipment. However, Amy from customer service got me all of the information I needed to complete the install. Thanks again and I highly recommend this unit for a Fantastic RV vent fan replacement.
by: Barbara 05/29/2023
Perfect replacement. However, instructions would have been beneficial, lol.
25
457
Show More Reviews
See what our Experts say about this Dometic Accessories and Parts
- Replacement Motor for Create-A-Breeze Model 8000 Trailer Roof VentThe correct motor for your Create-A-Breeze model 8000 is the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00. I have added a link to a video review for you to check out as well.
view full answer... - Availability Of Replacement Motor/Fan Kit For Fan-Tastic Vent Model 4000BTWe have exactly what you are looking for. The correct replacement motor/fan blade for your Fan-Tastic Vent Model 4000BT is the # FVK8017-00. You mentioned that you are not sure you need a replacement, so can you tell me what issue you are having that makes you think it is possible you need the new motor? I included a video of the # FVK8017-00 for you to take a look at.
view full answer... - Replacement Fan Motor And Blade For FanTastic Vent Fan 6000RBTAThe fan motor found in # FVK8017-00 is the right part to fix your problem, regardless of which direction the air is going, this is the motor you need. It also includes a new bow-tie bracket and blade, should you also need to replace those at some point as well. This part replaces the now obsolete part #4017-80 motor and blade which originally came with your 6000RBTA FanTastic Vent Fan. While we do carry other motors, they are all designed to raise and lower the lid only, which you state...
view full answer... - Will the Replacement Fan Motor Assembly Kit # FVK8017-00 Fit a Fan-Tastic Vent 4000 ModelYes, the Replacement Fan Motor Assembly Kit # FVK8017-00 is the correct part for your Fan-Tastic fan even if you have the can-style motor.
view full answer... - Replacement Motor for RV Fan-Tastic Roof VentFor Fant-Tastic roof vents the correct replacement motor is the part # FVK8017-00 that you referenced.
view full answer... - 2019 Coachmen Catalina Legacy 283RKSIf the fan blades look like the # FVK8017-00 or you can verify that what you have is a Fan-Tastic roof vent this replacement motor and fan blade assembly would work.
view full answer... - Will the Replacement Fan Motor Assembly Kit # FVK8017-00 Fit a Fan-Tastic Roof Vent 4000Yes, you can use the Replacement Fan Motor Assembly Kit # FVK8017-00 to replace the broken blades on your Fan-Tastic Roof Vent 4000. Simply remove your whole motor assembly, since the blades are part of it, and connect the butt connectors to the appropriate wires (pay attention to where each wire is connected when removing your old assembly).
view full answer... - Replacement Motor for Fan-Tastic Roof VentIt sounds like you do need a new motor, and Fan-Tastic roof vents will use the part you mentioned, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00. This is the only replacement motor for their fans, and is designed to be compatible with each of their models.
view full answer... - Replacement Fan Motor Recommendation for Fan-Tastic Roof Vent in 2012 Itasca Ellipse 42QDThanks for the picture of your roof vent. From that I can tell that the motor part # FVK8017-00 that you referenced is the correct replacement.
view full answer...
- Correct Replacmenet Fan and Motor for a Fantastic Vent B2000I did some poking around and I was able to find the Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans # FVK8017-00 which is the correct replacement fan and motor for your roof vent. Also, this is a reversible fan so it will work in either direction.
view full answer... - Replacement 12V Fan Motor/Blade Assembly for Fantastic Vent Series 7300The correct replacement 12V fan motor assembly for your Fantastic Vent 7300 series vent is indeed the part # FVK8017-00, according to my contact at Dometic/Fantastic Vent. You can double check by comparing your existing fan motor to the photo I linked for you which includes key dimensions.
view full answer...
- Replacement Roof Vent Fan Motor for Fan-Tastic Vent Roof Vent Fan Model 4000Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans part # FVK8017-00 works with all 4000 Series Fan-Tastic Vent Roof Vent Fans.
view full answer... - Replacement Motor and Fan Blade for Fan-Tastic Vent Create-A-Breeze Model 8000Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans part # FVK8017-00 is the correct replacement fan/motor for your Fan-Tastic Vent Create-A-Breeze Model 8000.
view full answer...
- Replacement Motor Solution for Fan-Tastic Roof VentMost likely you need the part # FVK8017-00 which fits most of the Fan-Tastic roof vents, but we don't have just the motor available. Does this match what your motor looks like?
view full answer... - Solution for Needing Replacement Fan Blades for Fan-Tastic Roof Vents AssemblyWe've had this question before and have checked with Fan-Tastic vents in the past and the only solution for getting a replacement fan blade for their fans is with a new motor assembly like the # FVK8017-00 that you referenced. The blades are not available separately.
view full answer... - Replacement Motor and Bracket Recommendation for Fan-Tastic Roof Vent 4000BWe've checked Fan-Tastic vent and the correct replacement motor and bracket for your 2004 4000B is the part # FVK8017-00. We had a customer with a 15 year old version of your vent come back and tell us it fit and worked well too. See attached review picture.
view full answer...
- Replacement Fan Motor Assembly For A Fan-Tastic Fan On A 2015 Tiffin Allegro Motorhome 36LAI contacted Fan-Tastic Fans, and they've informed me that the Replacement Fan Motor Assembly # FVK8017-00 is the correct replacement for your Fan-Tastic Fan part 810244, on your 2015 Tiffin Allegro Motorhome 36LA.
view full answer... - Fantastic Vent Model 6500 Replacement Fan AssemblyThe Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00 has the same hole spacing as the fan on your 6500 model so it will work. The diameter of the fan is a different than the original but it is the correct replacement. This fan is the only replacement that Fan-Tastic Vents offers and it is designed for compatibility with all their models. I've attached the dimensions to assist.
view full answer...
- Replacement Fantastic Vent Fan Motor For Auto Lift Unit Without Thermostat or RemoteThe Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00 is what you need to replace your current motor.
view full answer...
- Is Fan-Tastic Roof Vent Fan Motor BrushlessThe motor of the Replacement Fan Motor Assembly Kit # FVK8017-00 is brushless.
view full answer... - Replacement Motor For a Fan-Tastic Vent Model XW8100DMThe older Fan-Tastic Vent model XW8100DM has been discontinued and there is not a motor only replacement available. But the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00 will work as a replacement for your Fan-Tastic Vent model XW8100DM.
view full answer...
- Replacement Fan Motor Assembly For a Dometic Fantastic Fan Model 810034 Vent FanYour Dometic Fantastic Fan model 810034 will use the Replacement Fan Motor Assembly Kit # FVK8017-00. This is a direct replacement for your fan and will not require any modification.
view full answer... - Replacement Motor/Fan Blade Assembly for Fan-Tastic Vent Model 8000 Vent
Thanks for the picture! Yes, the Fan-Tastic Replacement Fan Motor Assembly Kit item # FVK8017-00 is the correct part for your Create-a-Breeze model 8000 vent. I confirmed this information with Fan-Tastic vent it is the best replacement.
view full answer...
- Is Installation of Fan Motor Assembly K8017-00 Done From TopWhen installing the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00 you can remove the fan housing if you like, and this will be easier if done from the top of the roof as opposed to inside the trailer. I have added a link to a video review for you as well of the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Kathleen M
Updated by:
Leah S
Updated by:
Matthew E
Updated by:
Kim H
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Cory
11/28/2023
It’s been a year since the install. It was an easy install and the fan has been working great. No issues noted and I expect to get many years out of it.