Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (210 Customer Reviews)
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Grease cap damaged/unusable and this like dexter item dimensions are all different. So long as the wheels line up and the drum contacts the brakes pad properly I’ll let it ride. And the like new but missing parts drum is damaged and the bearing race is not seated
trailer hub arrived with something that appears to be sand all throughout the assembly. I'm sure it is obvious what sand will do to bearing
Jenny N.
8/2/2023
I am not sure what happened there. It is the first time I have seen that happen. Customer Service will be in touch with you.
Everything I needed I found at etrailer and everything fit perfectly!! Customer service was excellent!!
Five star. shipping was slow. Product was great 14 K 14 plies under 2000 pounds independent suspension. Low fast and sassy. Yep that’s how I build them.
Everybody is completely smashed to pieces. I bought a kit for my store but can not put smashed torn apart boxes on the shelf. Why were these shipped in the box that is to be put on the shelf? Adhesive shipping labels veering descriptions and part quantities.
Jenny N.
4/10/2023
I am sorry that the hub assemblies were delivered this way. I will share this with our shipping department and will have our Customer Service team reach out to you.
Thanks so much etrailer for making me feel so much better/safer about carrying heavier loads in my trailer. Katrina also went the extra mile when it came to customer service and patience with my order. I had 15" six lug hub and drum assembly which held all I could load on them, like I said I just did not feel safe so I went with this hub and drum assembly which came with all necessary items for the install, and it allowed me to put 16" tires with a heavier weight rating. Very pleased.
Outer bearing #14125A was damaged. Notified Davine at etrailer and emailed her a picture of the damaged bearing. Currently awaiting a response. Everything else in the package was ok.
So far so good. Good customer service, boxes were not damaged and arrived within a couple days. Genuine dexter parts and they also helped swapped a backordered part.
Parts are good. Service sucks! When I ordered and paid for four of these they were in stock and was to be at my door in three days. Four days later they said they were out of stock and would take another two weeks before they would have them in. Don't order unless you have about three weeks!
As advertised
Worked great for the upgraded wheels I put on my Grand Design 5th wheel!!
As always, great service and knowledgeable assistance.
Quinn has been very helpful in making sure parts are delivered on time
good product for the money
The pre packed bearing kit saves time, easy to install. No concerns
Great product and exact replacement for our 42ft Keystone Montana High Country 375FL.
Fast shipping and correct part is extremely important as we are full time RVers and with limited time.
I've ordered several items over the years and always received great service.
These guy's at etrailer are hard to beat! Customer care is over the top. That's why Allison Creek does business with etrailer.
Perfect replacement for the factor hubs. Thought I ordered the easy grease hub. A pre-greased one was shipped...NO PROBLEM!!! One less thing I had to do to install. Etrailer will continue to have my business.
SECOND TIME IVE ORDER A HUB ASSEMBLY FOR MY JOB CAME IN EARILER THAN EXPECT & PACKEGED NICELY & EVERYTHING WAS CORRECT!!!!
I ordered this as spare hub assembly for my 5th Wheel RV. We are leaving next month on a 5000+ mile, 3 month trip. I figure if I have a bearing go bad I can swap out the whole hub and be back on the road in no time. The hub is the same Dexter hub that I have on my rig now.
Shipping was fast and free, Helen was great, helping me find the part numbers of some of the other accessories that I needed to have spares of. Speaking of shipping I had checked other places for the hub and while the price was similar the freight charges were half the price of the hub. I will definitely be giving trailer my business going forward.
Andrew
2/16/2020
I havent had to use this Hub as of yet but, just having with me when we travel is comforting.
Matched OEM perfectly
Hub was better than i hoped for the races were already installed just grease the bearings and put it together and they came sooner than expected.I have used etrailer in the past.couldnt be happier
This is exactly what I need for an on-the-road repair! I ordered a second because I had a wheel-lug issue on I-95, and this kit got me rolling again! Thanks for offering a very complete setup at a great price. Finally, the free shipping is EXCELLENT! With some vendors "free shipping" means "you will receive it sometime next year." Not etrailer.com! Thanks!
Al
3/31/2015
Still going strong! Excellent value, quality, reliability!
Quick delivery of quality parts.
These were easy to install, and have exceeded all expectations. I would definitely recommend.
Do you have a question about this Trailer Hubs and Drum?
Condition: Installed
Notes: Item has been previously test fitted and is missing all of the hardware.
Condition: Missing Parts
Notes: Item has been installed/test fit and contains the hub only, no accesories included.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Christopher
5/12/2024
Year out review all is good and any issues resolved