Compatibility Of Dexter 6,000LB Hub And Drum Assemblies On etrailer AxleTek 7,000LB Axles
Updated 03/14/2022 | Published 03/12/2022
Products Featured in This Question
Question:
Will a the dexter hub and drum assembly fit on an axle tek axle? I want to replace my tandem 6k dexter axles with 2-7k axle tek axles. Will I be able to reuse my existing bearings and hubs?
asked by: Ken M
Expert Reply:
To verify if your hubs on your 6,000lb Dexter axles are going to fit the etrailer AxleTek 7,000LB Axle # e35GR you will need to verify what bearings and grease seals are used on your hubs. The new axles will use a #42 Spindle # TRU57FR, and this is the most common spindle used on the Dexter 6,000lb axles. The etrailer AxleTek uses Inner Bearing # 25580(ID 1.750"), Outer Bearing # 14125A(ID 1.250") and Grease Seal # GS-2250DL(ID 2.250", OD 3.376").
The Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ and Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465 can be used if your current hubs and brakes are worn.
(click to enlarge)
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 78-1/4 Inch Spring Center
- 94 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Search Results: trailer hubs and drums
- Q&A: Will the Terran Axle Hub TX43VJ Fit the #42 Spindle TRU57FR?
- Q&A: Replacing 10x1-1/2 Inch Brake Assemblies with 10x2-1/4 Inch Brake Assemblies
- Q&A: Comparing Dexter Trailer Hub and Drum Assembly 8-219-4UC3-EZ and 8-219-4UC3
- Article: Best Bike Racks for Fat Bikes
- Video: All About the #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Video: Review of Terran Industries Trailer Hubs and Drums - Hub 6 on 4-1-2 - TX43VJ
- Video: Grease Seals 10-36 (pair) Feature Review
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
- Video: Checking Out the Trailer Hub and Drum Assembly
- Video: Ultimate Overview of the Grease Seals 10-36 (pair)
- Search Results: trailer spindles
- Q&A: Replacement Axles, Leaf Springs, and Equalizers for 2010 Keystone Cougar 26BHSWE
- Search Results: dexter trailer hubs and drums
- Search Results: b12e~22
- Video: All About the Replacement Bolts for Equal-i-zer Weight Distribution Head
- Q&A: Are Replacement Drums Available For An AL-KO 4400 Pound Axle?
- Q&A: Double-Lip Grease Seals to Replace AL-KO Part 363497
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: equalizer hitch
- Search Results: spindles only trailer axles
- Search Results: round trailer spindles