Can 7,000 lb Trailer Axle e35GR Replace 94 Inch Hub Face, 77 Inch Spring Center Axle

Published 12/16/2021

Products Featured in This Question

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

(668)

$11.90

Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud

(374)

$185.01

Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 94" Long - 7,000 lbs

(276)

$526.45

Question:

We have a broken Lippert V000370628 axle on one of our trailers and looking for a replacement. The trailer manufacturer stated it looked like there 94 hub face, 77 spring center 7K spring axle. Will the e35GR work as a replacement. If not, what do you suggest.

asked by: Joe B

Helpful Expert Reply:

Even though the spring centers are different, since you have the same hub face to hub face measurement of 94 inches, you can replace your Lippert axle with the Trailer Axle Beam with Easy Grease Spindles # e35GR.

However, the spring seats do need to be in the same spot, so you'll need to weld on new Spring Seat for Axles with 3" Diameter # TRSS300.

The hub face measurement is the most important one as it is common to move the spring seats, so that's all you'd need to do to use the Trailer Axle # e35GR. Then for the correct hub to go with this axle you will need the Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ.

expert reply by: Kyle S