Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
(53 reviews)
Price: $307.71
In Stock
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
Item # 8-219-4UC3-EZ
Our Price: $307.71
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (53)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 8-219-4UC3-EZ
- 8 on 6-1/2 Inch
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- Hub with Integrated Drum
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- EZ Lube
- 1/2 Inch Stud
- Dexter
Hub-and-drum assembly fits 5,200-lb to 7,000-lb E-Z Lube axles with spindles that require a 2-1/8" grease seal. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb to 7,000-lb E-Z Lube trailer axles that require 2-1/8" inner diameter grease seal
- Also fits spindles that take a 2-1/4" inner diameter grease seal - requires RG06-070 (sold separately)
- Drum dimensions: 12" diameter x 2" wide
- Works with 12" brake assembly
- Bolt pattern: 8 on 6-1/2"
- Wheel stud diameter: 1/2"
- Weight capacity: 3,500 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: 14125A (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: 14276
- Grease seal (included): GS-2125DL
- Inner diameter: 2.125"
- Outer diameter: 3.376"
E-Z Lube-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-219-96 Dexter 12" Hub and Drum Assembly for 5.2K to 7K Axle with Hardware - 8 on 6-1/2 - EZ Lube
Replaces 8-219-4UC3-EZ
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not fit
Customer Reviews
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2 - 8-219-4UC3-EZ
Average Customer Rating: 4.7 out of 5 stars (53 Customer Reviews)
Hub-and-drum assembly fits 5,200-lb to 7,000-lb E-Z Lube axles with spindles that require a 2-1/8" grease seal. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: 12x2 Brakes 6k-7k 8 lug drums04/01/2015
I have a 1999 Kaufman 50' 3 car wedge tri-axle trailer with Dexter 12x2 8 lug 6k lb axles (3 axles) so I ordered new drums (loaded with bearrings, seals, races, lug nuts) and separately ordered backing plates with brakes. Previously I ordered an equalizer shackle kit from etrailer.com and they shipped very fast with free shipping, so i have been a return customer and will continue to be. Great service, fast shipping great prices, and everything works how it should.
by: RandyG12/09/2016
I have ordered all my trailer brakes from e-trailer
I have always been very happy with what I've ordered
If there was something I wasn't sure about I'd look on there web site and find it
Before I ordered from them I shopped around in my own town for parts
what I found is
E-trailer had better parts and someone who was willing to help and not just give you something so you would leave their store because you was asking to many questions
by: Jesse 01/25/2024
great company to work with
by: Skippy08/20/2023
Very fast shipping. Excellent packaging. Instructions were very good.
by: Alpha11/27/2023
Super customer service!!
by: Joel C.07/19/2017
I installed the left assy. today and all went well thanks to all the support and videos. All questions were answered thoroughly and I knew I was in good hands all the way. The product arrived packaged very well without any issues. I will be installing just the break assy. on the right side so that they break even. The only thing I noticed, and I don't know why is that the 8 pressed bolts on the hub were a smaller size than the ones on my 5er. I am glad the nuts were supplied, and hope the smaller size does not interfere with the wheel mounting. 5+ stars for e-trailer.
Instead of crimping the wires together, I soldered them together and then shrink wrapped them, then added water resistant electrical tape around the shrink wrap. I figured this would be more secure than crimping.
by: Marc02/25/2023
Bad seal for the bearings
Jenny N.
2/25/2023
We can take care of that for you. I will have our Customer Service team contact you.
by: Griffin09/09/2022
I gave the wire portion of my order two stars, giving this part of the order one star. I'd give my overall experience with etrailer one star as well. Two main reasons for low ratings: packaging and customer service/support.
by: David02/24/2019
had to replace all four drums on EZ lube axles as I had already replaced the brakes with the newer never adjust brake kits and this was the perfect patch. Only thing is this kit comes with the Dexter 10-10 grease seal which has a 2.125 I.D. After measuring the axle seal shaft diameter that was 2.252 I went with a double lip seal GS-2250DL leaving it with a .002 interference fit. My order came in only a couple off days and all the parts were as described and in great packaging.
by: kdanie03/18/2017
I ordered the Dexter version specifically to avoid any issues but I had one anyway, the studs are smaller dia. than the OEM hubs that came on my Dexter axles. They send new lug nuts with the kit but they are not appropriate for my aluminum wheels requiring additional expense for new lug nuts. Other than the stud size they are exact replacements.
by: Tonna06/20/2018
I contacted James and he helped with with customer support that you just don’t find any more. He took the time to answer my questions and make sure that the parts I needed were the parts I ordered and received. My entire order arrived on the date that they said it would. I would highly recommend E trailer and have already. Recommended them to several fellow ranchers and farmers.
by: Chester05/14/2016
Bearing races had surface rust. Cleaned with light sandpaper but I cannot be sure the bearings were not compromised.
by: Caleb06/21/2016
Super fast shipping. Product was in my hands less than 12 hours after I ordered it. Installed and was back up and running in no time flat. Will def be doing business with again in the future for all of my fleets trailer parts.
by: Cary R.03/08/2016
Very happy with how fast it was shipped and received. It was ordered on Thursday afternoon and arrived the following Monday. Very good quality. I have ordered other items from e-trailer and very happy with their service.
by: Mike08/06/2015
Wrong outer bearing and dust cap, 1 out of 4 hubs. Had to use old parts. Everything else worked fine.
by: Scott 08/28/2015
American Made, great product, fit perfect and the service and available videos made etrailer purchasing a no-brainer.
by: Michael07/14/2018
Parts were delivered on time and were exactly as expected. Everything fit and functions as desired. This was my third experience with e trailer, and customer service was once again second to none.
by: Ted S.01/12/2015
Perfect fit for my Keystone tri-axle trailer. Thanks Marica
by: James05/22/2021
Had to use the original hub over the bearing. New ones were 1/8” larger in diameter and would not fit.
by: James 05/03/2021
Went through the packaging and everything seems to be there. Will know in about a week.
James
5/4/2022
Love the self adjusting brakes. They work great
by: beaner01/17/2017
Great replacement back up hub for trave ling.
by: Donald C.03/13/2015
Everything seems to go together as they are supposed to. Had a little problem with delivery. But once I inquired and the rep discovered the problem she was quick to fix it. I would give an A+ to customer service. Some problems just happen. But how you fix that problem speaks volumes.
by: James03/17/2022
WOW!!Received my order so very quickly and in great condition. the representative I spoke to was very courteous and assured me that the item I ordered would be exactly what I had ordered!!!
Mahalo, all the way from HAWAII11
by: John 09/20/2022
Good Service
by: Gary11/12/2014
Product was exactly what was ordered and delivered quickly. I wish all on-line companies were this proficient.
25
53
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- What is Difference Between Trailer Hubs 42866UC3-EZ and 8-219-4UC3-EZThe big difference is the grease seal inner diameter which basically indicates what spindle it would fit. The part # 8-219-4UC3-EZ has a grease seal with an inner diameter that is 2.125 inch whereas the part # 42866UC3-EZ has that dimension of 2.25 inch. Also worth noting is that you can swap the grease seal of the # 8-219-4UC3-EZ to the other size with just the part # GS-2250DL.
view full answer... - Hub And Drum Recommendation For Lippert Trailer 7000k AxleThe Dexter E-Z Lube Hub and Drum assembly that would work for your Lippert axles with the bearing and seal numbers you provided is part # 42866UC3-EZ. This fits 5200 lb to 7000 lb axles that require a 2-1/4 inch ID grease seal. The drum dimensions for this measure 12 inches diameter by 2 inches wide. I spoke with my contact at Dexter and they told me they do not test fit their hubs and drums on other manufacturer axles. Based on the bearing and race numbers you provided this will work for you.
view full answer... - Replacement Hub and Brake Assemblies for Dexter 8-219 Wheel HubsYou have some options with the 8-219 for replacement parts. These kits will include new brake hubs, bearings, races, seals, caps and wheel nuts. 1/2" Wheel Studs Grease Cap # 8-219-4UC3 1/2" Wheel Studs EZ-Lube Cap # 8-219-4UC3-EZ 1/2" Wheel Studs Oil Bath Hub # 8-219-9UC3 9/16" Wheel Studs Grease Cap # AKHD-865-7-1-K 9/16" Wheel Studs EZ-Lube Cap # 8-219-13UC3 5/8" Wheel Studs EZ-Lube Cap # 8-219-18UC3 The Dexter Electric Trailer Brake Kit # 23-180-181 will require the brakes to be...
view full answer... - Recommended Replacement Brake Hubs and Brakes for a Dexter 7K AxleI wasn't able to find anything relating to that part number and since you're unsure of what you have I'd just recommend swapping the entire hub to make everything easier. You're just going to need to choose the hubs that have your current wheel studs. For 1/2" studs with a grease cap you'll want # 8-219-4UC3, For 1/2" studs with an E-Z lube cap you'll want # 8-219-4UC3-EZ, For 1/2" studs with an oil bath hub you'll want # 8-219-9UC3, For 9/16" studs with a grease cap you'll want # AKHD-865-7-1-K, For...
view full answer... - How to Select 8-on-6-1/2 Hub Drums for Triple Axle TrailerTo figure out the parts needed to convert a triple axle trailer to new 8-on-6-1/2 hub/drums you'll start by identifying the bearings and seals used in the current setup. A new hub/drum has to use the same bearings and seals in order to fit on the current spindles. Please refer to the linked photo diagram that shows how bearing and seal numbers usually appear on these parts. Pull one hub so you can remove the bearings and seal and try to find the part numbers. Most of our 8-on-6-1/2 hub/drums...
view full answer...
- Hub/Drums and Brake Assemblies for Trailer with Bearing Numbers LM67048 and 25580For an 8 lug hub/drum that fits your spindles based on the bearing numbers you mentioned you'd want the Dexter Hub part # 8-219-4UC3-EZ and then for brake assemblies the part # AKEBRK-7-SA is a set of self adjusting assemblies that comes with a left and a right.
view full answer... - Recommended Replacement Hub With 9/16 Studs For A Dexter 6000 Pound AxleWe do indeed have a hub that will let you use the Westlake 215/75R17.5 Radial Tire w 17-1/2" Lynx Aluminum Wheel - 8 on 6-1/2 - LR J - Black # LHAS701 on your trailer. The etrailer.com Easy Grease Trailer Hub and Drum Assembly # AKHD-865-7-1-EZ-K will use the # 25580 inner bearing and # 14125A outer bearing and will get you the needed 9/16" studs for the wheel. However, the seal that comes on this will have a larger inner diameter than what would come with a hub that uses 1/2" studs, so...
view full answer... - Dexter Equivalent Replacement for Lippert 148627 Hub/DrumThe comparable Dexter product would be part # 8-285-11, which is an 8K 12-1/4 x 3-3/8 hub/drum with a 8 on 6-1/2 inch bolt circle. The drum comes with the races already installed, but the # 25580 and # 02475 bearings and # RG06-070 grease seal are sold separately.
view full answer... - How to Convert From Hydraulic Surge Brakes to Electric BrakesSince you are converting from hydraulic to electric more than likely you will need new hubs and drums. Drums made specifically for hydraulic systems are not designed with electric brake magnets in mind so the inside surface is probably rough and unfinished. In order to convert you will need electric brake assemblies, hubs and drums, trailer wiring, a breakaway kit, and a brake controller. Start by identifying which hub and drum assembly you need. You will need to know the correct bearings...
view full answer... - How To Upgrade a Dexter D60 Axle To Use 8 on 6-1/2 Inch HubsIn order to upgrade to the 8 on 6-1/2" lug pattern on your Dexter D60 Axle you will need to use the Dexter Trailer Hub and Drum Assembly part # 8-219-4UC3-EZ or the Dexter Trailer Hub and Drum Assembly part # 42866UC3-EZ. The former uses a 2.125" grease seal whereas the latter uses a 2.25" grease seal. If you send me the serial number on your axle I can confirm this for you or you can order Dexter Trailer Hub and Drum Assembly part # 8-219-4UC3-EZ and then buy the Grease Seals 10-36 part...
view full answer... - Are LM67048 and 15123 Bearings Interchangeable On 5,200 Lb AxlesThe LM67048 and 15123 outer bearings are interchangeable since they both measure 1.250" diameter. They are commonly used on 5,200 lb axles. For replacement hubs, we offer the Dexter Trailer Hub and Drum Assembly part # 8-219-4UC3-EZ part # 8-219-4UC3-EZ for 8-bolt or part # 8-201-9UC3-EZ for 6-bolt. These both use 15123 outer bearings but can be used where the old bearing was a LM67048.
view full answer... - Which Spindle Does Dexter Trailer Hub and Drum Assembly FitThe Dexter Trailer Hub and Drum Assembly # 8-219-4UC3-EZ fits spindles on a 5,200, 6,000, or 7,000 lb axle. The # 14125A bearing that comes with this is typically found on a 7k axle but the inner diameter is the same as those used for the other capacities. Unfortunately, all three axle capacities use the same #42 spindle so at best you know the spindle and hub are capable of handling 7,200 lbs but they can't determine the exact axle capacity. Looking back at your history I do not see an...
view full answer... - Which Hubs Fit the # TRU37FR SpindleIf you need a 6 lug on 5.5 inch bolt pattern then you will need the following hubs. 8-213-5UC1-EZ 6 on 5.5 Idler Hub Bearings 25880 inner and 15123 outer 8-201-9UC3-EZ 6 on 5.5 Hub and Drum Bearings 25880 inner and 15123 outer If you need a 8 lug on 6.5 inch bolt pattern then you will need the following hubs. 8-231-9UC1-EZ 8 on 6.5 Idler Hub Bearings 25880 inner and 14125A outer 8-219-4UC3-EZ 8 on 6.5 Hub and Drum Bearings 25880 inner and 14125A outer Keep in mind that when using...
view full answer... - Can New 5200-Lb Axles Replace 4400-lb Axles on Tandem Toy Hauler TrailerYou can change out your toy hauler's axles to higher-rated ones and this will certainly increase the axles' safety margin but it does not necessarily increase the trailer's capacity. The frame and other parts of the overall structure also have to be rated higher than the existing axles in order for you to end up with a higher actual trailer capacity. You can check with Forest River by giving them the trailer VIN number. They can then tell you if the axles are the weakest link and if replacing...
view full answer... - Is There 5,200 lb Trailer Hub that has 8 Lug Bolt PatternYes, for 5,200 standard trailer axles we have the hub part # 8-219-4UC3-EZ which is a fit for 5,200 lb axles and has the bolt pattern of 8 on 6-1/2 inches like you said you need.
view full answer... - Can 6,000 Pound Dexter Hubs be Replaced with Hubs that Have Different Bolt PatternI reached out to my contact at Dexter and with the information you provided (thank you!) she was able to determine that you currently have the Dexter Trailer Hub and Drum Assemblies # 8-201-9UC3-EZ mounted to the 6,000 pound axles. This particular hub uses the # 25580 inner bearing and # 15123 outer bearing. With this in mind you will indeed be able to upgrade to hubs that feature an 8 on 6-1/2 inch bolt pattern, for which the Dexter Trailer Hub and Drum Assembly # 8-219-4UC3-EZ will...
view full answer... - Replacement Hub Recommendation for Lippert 6,000 lb AxleYes, the Dexter Trailer Hub and Drum Assembly # 8-219-4UC3-EZ that you referenced is a confirmed fit for your Lippert 6k axle that you mentioned but you'll need to verify the grease seal dimension on your spindle. You'll need yours to measure 2.125 inches for this hub to fit. If instead you measure 2.25 you'll need the hub # 42866UC3-EZ instead as it comes with the correct seal for that dimension.
view full answer...
- Upgrading Hubs From 6 Bolt to 8 Bolt for 5,200 lb AxlesWe have 2 different options for you to use to upgrade your 5,200 lb axles from 6 bolt to 8 bolt with 1/2 inch studs. Dexter Axle has the Trailer Hub Assembly, part # 8-231-9UC1-EZ, which is black in color and comes with the hub, inner bearing, part # 25580, outer bearing, part # 14125A, and the seal that you will be needing. This Trailer Hub Assembly also comes in a Galvanized Hub, part # 8-231-50UC1-EZ. Similar options that include the drums, in case you have brakes on your trailer,...
view full answer... - Troubleshooting Trailer 7k Axle with Locked Up WheelIt's probably a bearing that got destroyed due to lack of lubrication which then caused it to look up to the axle's spindle. What you are going to want to do is take it all apart and see what the damage is. Remove the wheel, take off the dust cover of the hub, and then remove the spindle nut that holds the hub to the axle. Hopefully you can then pull the hub off of the axle easily. I'd assume you'd need a new hub/drum like with the part # 8-219-4UC3-EZ but it is possible you could get...
view full answer... - How To Use 8 Lug Wheels With the Timbren 3.5K Heavy-Duty Axle-Less Trailer SuspensionThe Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02 will work with an 8 on 6-1/2" bolt pattern using the Dexter Trailer Hub and Drum Assembly part # 8-219-4UC3-EZ and Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-458-459. The 15123 bearing that the Timbren Heavy-Duty Axle-Less Trailer Suspension uses has the same inner diameter as the 14125A bearing that the Dexter Trailer Hub and Drum Assembly has so they can be interchanged.
view full answer... - How To Upgrade From 6 on 5-1/2 Inch Hubs to 8 on 6-1/2 Inch Hubs On a 5,200 Lb or 6,000 Lb AxleIf you have a 5,200 lb or 6,000 lb axle with 6 on 5-1/2" hub/drum assembly that uses 25580 inner and 15123 outer bearings then you can upgrade to an 8 on 6-1/2" hub/drum assembly that uses 25580 inner and 14125A outer bearings because both the 15123 and 14125A outer bearings have the same inner diameter of 1.250". For this, we have the Dexter Trailer Hub and Drum Assembly part # 8-219-4UC3-EZ which will work well on a 5,200 lb or 6,000 lb axle
view full answer... - Recommended 8 Lug Hubs And Brakes For An M101A1 Trailer With Timbren Axle-Less Suspension SystemYes, for your Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02 you can use the Dexter Trailer Hub and Drum Assembly # 8-219-4UC3-EZ and then the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7K # 23-464-465 for the brakes. From there you'll need to install the trailer wiring, a breakaway kit like # 20400, and will require a brake controller for your towing vehicle to activate the brakes. If your trailer doesn't have a junction box...
view full answer... - What Is the Torque Spec for Axle Nut When Used with Oil Bath HubsThere isn't an exact torque value for the spindle nut regardless of whether or not the hub uses grease or oil. The nut will need to be tightened until there is no side to side play on the hub. It is more of a process by feel rather than specific torque value. The process would be the same for both grease and oil bath hubs.
view full answer... - Replacement Brakes and Hub/Drums for a 2019 Jensen Trailer with 5,080 lb AxlesTo replace the electric brakes on your 2019 Jensen trailer you need the Electric Trailer Brake Kit # AKEBRK-7-SA and Mounting Hardware Kit # BRKH12, and then to replace your hub/drum assembly you need one of the following: - 6 on 5-1/2" Bolt Pattern # AKHD-655-6-EZ-K - 8 on 6-1/2" Bolt Pattern # 8-219-4UC3-EZ The 6-Bolt hub uses 25580 inner and 15123 outer beatings as well as a grease seal with a 2.25" ID and 3.376" OD, and then the 8-Bolt hub uses 25580 inner and 14125A outer beatings...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
David F
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Joel C.
7/20/2018
No problems. Install was easy, and product worked fine. The only issue was the studs were a different size than what was on the trailer. I had to purchase new nuts at a different Web site.