bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11002
Retail:$339.74
Our Price: $194.40
You Save: $145.34
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 22 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11002 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (33)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C11002

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Visible Cross Tube
  • CURT
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11002 Curt Class 1 Trailer Hitch Receiver

Compare to Draw-Tite 24852

Installation Details C11002 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11002

Average Customer Rating:  4.8 out of 5 stars   (33 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:
2014 Honda Crosstour

Easy to install and works perfectly for my bike rack.



by:
Honda Crosstour

I bought the hitch so I could mount a bike rack for a tandem bicycle on a Honda Crosstour. The hitch works great for that purpose. Installation was straightforward, but removing the rubber rings to lower the exhaust was more challenging than I expected.

Steve S.

3/24/2015

Trailer hitch is working great.



by:

zero issues, great communication from support. highly recommend etrailer and this Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Item #C11002

owned for 1 year - mounted up to my 2014 honda crosstour without any issues at all. still going strong. using it to tow a dirtbike on a 4' x 8' trailer.



by:
Harley Davidson

I purchased a C11002 hitch for my 2010 Honda Cross Tour so I can trailer my Harley Davidson from Massachusetts to Florida and back again. The hitch was easy to install and it has worked well for me for the trip down to Florida and back to Massachusetts. I highly recommend this hitch.



by:

Works fine but the mounting holes didn't quite line up with the attachment points on the vehicle. I had carefully bend it to get it to fit.



by:

This hitch was an easy install and fit perfect as the instructions were clear and precise. The quality and finish are 5 Star! This is being used for a bike rack and is very sturdy. Thanks etrailer.



by:
2014 Honda Crosstour

Performs exactly as described. Installation was easier on our 2012 Crosstour than our 2014 Crosstour.

Dave

8/26/2019

100 great



by:
Honda Crosstour

Great purchase for better half who uses the trailer hitch as a secondary bumper on his newer Honda Crosstour
Highly and enthusiastically recommend
Can self install but had a Chevy car dealer install in a couple of hours
Thanks again



by:
2015 Honda Crosstour

I asked this question about the parts received before I discovered this product review option. so I will repeat my question. I got a wire harness for a 2012 Honda Crosstour. the instruction show to put a 15 amp fuse in the fuse box under the hood. There also is a small container for a fuse included in the red wire of the harness. Do I need a fuse in there also? if yes ? what size? Thanks for your help.





by:
2013 Honda Crosstour

Installation was straight forward and simple. Took me about two hours could have been less but I am pretty picky about doing everything perfect.

Travis

6/1/2019

Great still



by:
2013 Honda Crosstour

Hitch came in very good condition. Wiring harness had no good instructions for the 2013 Honda Crosstour.



by:
2010 Honda Accord

Website to order was very user friendly, hitch delivery was earlier than anticipated, installation was easy. Very happy with the quality and customer service! Longevity of the build is the last part and time will tell!



by:

Great product for the price.



by:

I just passed the one year mark with my hitch and it's been FLAWLESS! I mean, perfect! I have towed a zero turn mower about 1/2 dozen times/month, furniture, etc and it's still going strong. It's tightly installed, durable and rugged. I highly recommend it!



by:
2013 Honda Crosstour

This product blends very well with the existing bumper- actually looks like OEM. Plan to use this to tow a 14' dinghy trailer with about 1,000 lbs of weight.



by:

We ordered this hitch for Christmas for our daughter. We had ordered the wrong style she wanted and when we went to exchange they were prompt about getting the new one out to us. They were on top of it all. The hitch hasn't been installed on the car for further review.



by:

I can sum up my thoughts simply easy, easy ,easy ! I think this hitch is built to a higher standard that is to say Robustly I have no worries as to whether it will prove capable to its intended task , and that's just Nice Ya gotta love that !



by:

Solid heavy construction.



by:

The fitment videos are really helpful. The honest product review vids are great too.



by:

Install was super easy, fit perfect, great instructions. Very solid unit.



by:

Awesome experience and product!
My
hitch arrived in just a couple of days & it only cost me $65 to have it installed (1.25 hrs).
Thanks again!



by:

Durable, excellent product, highly recommended...trouble free!

Bart

9/19/2019

Still great after one year!



by:

All went well. Quick delivery and correct part.
Thanks!



by:
2012 Honda Crosstour

So far so good. Had it installed last night so we didn't really use it yet, but it looks good.



by:

Easy to install perfect fit very durabl e.


25
33
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Correct Trailer Hitch for a 2011 Honda Crosstour
    The Honda Crosstour is part of the Accord family and we do have a trailer hitch option for the 2011 model. I recommend the Curt Trailer Hitch Receiver part # C11002 which is a bolt-on fit. It has a class I rating with 1-1/4" receiver tube opening.
    view full answer...
  • Why Cant More than 2 Bikes be Carried on a Class I Trailer Hitch on a 2013 Honda Crosstour
    That is correct. On a Class I hitch it isn't the weight that is the issue. It is how far that weight is from the hitch receiver. A third and subsequent bikes will be too far from the receiver which will put a lot of extra stress on the hitch and where it attaches to the vehicle. If you have ever used a long wrench or breaker bar to loosen a lug nut it is the same concept: if the lever is long enough it takes very little force to loosen that nut. And if the weight on a bike rack is far enough...
    view full answer...
  • Solution for Hitch Install Where Weldnut of Vehicle Frame Gets Stripped
    I have to recommend you find a way to use that mounting point on your hitch. What you will need to do is find the next size up thread tap and tap the threads to the next size up and source a bolt with the matching threads so that you can secure the hitch with all of the intended holes. If you do not use all of the mounting points of the hitch the warranty would be voided regardless of how you plan to use the hitch.
    view full answer...
  • Will the Curt Hitch # C11002 Fit a 2012 Honda Crosstour AWD EX-L
    The Curt Hitch # C11002 will fit on your 2012 Honda Crosstour AWD EX-L model. My tech contact at Curt confirmed the fit and the installation instructions lists the fit for your model Crosstour. This hitch does not require drilling or welding for installation, it uses a bolt-on design for a simpler process. To bolt on your hitch, you will be using weld nuts already found on your vehicle that can be dirty and hard to use. I attached a help article on how to clean the weld nuts on your vehicle...
    view full answer...
  • Installing Curt Trailer Hitch Receiver on 2013 Honda Crosstour
    The Curt Trailer Hitch Receiver # C11002 that you purchased is a direct fit for your 2013 Honda Crosstour. The M10 bolts likely won't fit because there is rust and corrosion built up in the open holes and the weld nuts in the frame. Using lubricant and a wire brush usual solves the problem. I've linked an article on cleaning weld nuts for you as well.
    view full answer...
  • Class I Cargo Carrier for a 2010 Honda Accord Crosstour
    I recommend the 20 x 47 Reese Cargo Carrier, part # 63155 for your 2010 Honda Accord Crosstour. This combines a mesh floor and raised sides to give you extra versatility in cargo carrying. It is rated to carry up to 300lbs, though you'll want to verify your towing and tongue weight capacity in your owner's manual prior to use. This would work great with your Curt Class I Hitch, part # C11002. This is a no drill installation and I've included a video detailing that process on the 2012...
    view full answer...
  • Solution for Stripped Weld Nut When Installing Trailer Hitch
    If you can access an open end of the frame where the weld nut broke off you could fishwire a new carriage bolt in place of the weldnut. Otherwise you may have to weld the hitch on or see if a local garage like you mentioned could come up with a way to re-weld in a weld nut. For a bolt leader you could then use the # C58400. I attached a link to an install video that at the 1:30 mark shows how to fishwire hitch hardware. You will need to drill out the old weld nut.
    view full answer...
  • Bike Rack Recommendation for a 2011 Honda Accord
    For your 2011 Honda Accord Crosstour you would have to use a 1-1/4 inch hitch like the Curt Hitch part # C11002. 2 inch hitches are designed for larger vehicles like SUVs trucks and vans. For a bike rack you would have to go with one that is confirmed to fit a Class I hitch, using an adapter would be a great idea since they cut the capacity of the hitch they are used on in half. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack...
    view full answer...
  • Can I Remove My Spare Tire With Hitch Receiver Installed
    The crossbar on the Curt Trailer Hitch Receiver part # C11002 is bowed outward towards the rear of your 2013 Honda Accord Crosstour to allow for removal of the spare tire while installed. This is further explained at the :20 second mark in the attached video of an older hitch. The Curt has a similar design. When using the Curt Trailer Hitch Receiver, you will also need to use the required Curt Trailer Hitch Support Strap part # 18050 to secure all non-towing accessories. When not in use,...
    view full answer...
  • Hitch Recommendation for a 2015 Honda Crosstour
    Yes, the Curt Hitch part # C11002 that you referenced has been confirmed to fit your 2015 Honda Crosstour so it would work well for you. If you are looking for a bike rack I would recommend the Swagman XTC2 part # S64670. This rack has a ton of features and is at a great price. Our customers have left a ton of positive reviews for this rack as well. Check out the review video I attached.
    view full answer...
  • Class I Platform Bike Rack that Can Fit Curt Hitch of 2010 Honda Accord
    The Swagman XC bike rack part # S64650 that you referenced is compatible with Class I hitches like the Curt # C11002 you mentioned that fits your 2010 Honda Crosstour.
    view full answer...
  • Best Hitch For 2010 Honda Accord Crosstour For A Bike Rack
    The Curt Hitch part # C11002 is a custom fit for your 2010 Honda Accord Crosstour and it is your best option for the use of a bike rack. The Curt Hitch gives you a little over 3 inches more ground clearance then the Draw-Tite version for this vehicle so the bike rack is less likely to drag the ground if you are ever in a low ground clearance situation. I recommend the Class I compatible Thule Camber 2 part # TH9058 for your Class I hitch because it only weighs 28lbs so it is very easy...
    view full answer...
    Image 1 for
  • Can I Use My Older Thule Vertex XT Bike Rack With Curt Hitch On 2013 Honda Crosstour
    The Curt Hitch part # C11002 fits the 2013 Honda Crosstour and is a Class I hitch so the Vertex would need to be class I compatible for it to fit. Thule no longer produces the Vertex bike racks but there were a few different versions of the Vertex in production at one time. The Thule Vertex 2-bike rack part number 9028XT is compatible with your Class I hitch along with the 4 bike rack version which was part number 9029XT. However, if your Vertex is the swing-away version part # 9031XT...
    view full answer...
    Image 1 for
  • 2010 Honda Accord Crosstour Trailer Hitch Recommendation
    There are 2 trailer hitches confirmed to fit your 2010 Honda Accord Crosstour model: - EcoHitch # 306-X7299 - Curt # C11002 I prefer the EcoHitch because it has a hidden crosstube and a 2" hitch receiver, but if you're needing something more economical then the Curt is the best choice for you - just understand this has a Class I 1-1/4" receiver and a visible crosstube so your accessories will be a bit more limited and you might have less ground clearance because of the crosstube. Attached...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch And Wiring for 2015 Honda Crosstour
    The trailer hitches we offer for your 2015 Crosstour are all Class l hitches and have a 1-1/4 inch receiver opening. The hitch I recommend is the Curt, part # C11002. The hitch can be used for some light towing if that is what you have in mind.For a ball mount I recommend part # 3590. For a 1-7/8 inch hitch ball you can use part # 19256, and for a 2 inch hitch ball you can use part # 19258. If you need a trailer connector on your Crosstour I recommend part # 118642. This is installed...
    view full answer...
  • Trailer Hitch Receiver Tube Location on 2015 Honda Crosstour
    All of the 1-1/4-inch Class I trailer hitches we offer for your 2015 Honda Crosstour will install in essentially identical spots on the vehicle. The linked page will display all available hitch models. I checked with my contact at EcoHitch and Curt about the position of their hitch's receiver tube after its installed. The end of the receiver tube will extend out past the bumper cover by approximately 2-1/2-inches, even without the ball mount installed. This receiver tube location is a function...
    view full answer...
  • Recommended Hitch for a 2011 Honda Accord
    I took a look online and the 2011 Honda Accord has a maximum towing capacity of 1,000 lbs so the capacity of all the available hitches would be well over what the vehicles can handle. This is common practice amongst hitch manufacturer's and why we advise customers to verify their vehicle's actual capacity and not go off of what the hitch can do. The EcoHitch Hidden Trailer Hitch item # 306-X7299 is the only hitch available for the 2011 Accord that has a 2" receiver. It however only fits...
    view full answer...
  • Trailer Hitch Recommendation for 2015 Honda Crosstour
    Torklift manufactures hitches that are designed for heavy duty applications like full sized trucks. Their hitches would have capacities ranging from 15 to 30K, which would be well over the towing capacity of your Crosstour. The hitches available for your 2015 Honda Crosstour are all Class I, which would have a 2000 lbs towing/200 lb tongue weight capacity. This capacity would be limited by the capacity of the vehicle itself, which is 1000 to 1500 lbs, depending on how its equipped. I'd...
    view full answer...
  • Can a 2015 V6 AWD Honda Crosstour Tow 2 Snowmobiles
    As long as the gross trailer weight is under the 1,500 pound capacity and the tongue weight is under the 150 pound capacity of the 2015 Honda Crosstour then you will be good to go as far as occasionally towing the trailer. If the trailer is heavier than the capacity of the vehicle I can't recommend towing it. The suspension would be fine because if the trailer is within the capacity of the vehicle then the tongue weight would be just 150 pounds which it should not have a problem handling...
    view full answer...
  • Trailer Hitch Recommendation for a 2012 Honda Accord Crosstour
    The Curt hitch # C11002 for the 2012 Honda Accord Crosstour is going to be visible below the rear fascia as you can see in the picture I have provided. What I recommend is EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7299. This hitch has a hidden crossbar and will look great on your Crosstour. This hitch with an accessory like a bike rack or cargo carrier but can also be used for towing if your vehicle is rated for it. The EcoHitch trailer hitch does not require the...
    view full answer...
    Image 1 for
  • Recommendations for Hitch to Use Bike Rack on 2011 Honda Accord 4 Door Sedan
    All of the hitches available for your 2011 Honda Accord 4-Door Sedan are a Class I 1-1/4 inch size. You will want to make sure the bike rack you use is designed to fit a Class I 1-1/4 inch hitch. A Class I hitch will only accept Class I rated accessories. I am including a link to a FAQ page on hitch sizes and different class ratings. It will describe the difference in the Class I rated hitch. The Curt Class I 1-1/4 Inch Hitch, part # 11002, you have mentioned will not fit your Accord....
    view full answer...
  • Recommended Trailer Hitch and Bike Rack for 2015 Honda Crosstour
    We certainly do. You'll want to begin by installing a hitch, such as the Curt Class I, part # C11002. You can see the installation instructions by clicking the provided link. Once the hitch is in place, you can install a platform-style bike rack. Of the available choices, I'd recommend the Swagman XTC2, part # S64670. Ratcheting padded hooks hold the bikes firmly in place without any danger of them swinging back and forth, like what can happen with some hanging-type bike racks. There are...
    view full answer...
  • Recommended Trailer Hitch and Bike Rack for 2014 Honda Crosstour
    The Cur 1-1/4" hitch # C11002 and the EcoHitch 2" # 306-X7299 are both custom fit trailer hitches confirmed to work with your 2014 Honda Crosstour EL-X. I recommend the EcoHitch # 306-X7299 because it has a higher tongue weight capacity of 525 pounds verses the 200 pounds of the Curt and with the 2" receiver opening, you have many more options for accessories. The downside of the EcoHitch is that it is more expensive than the Curt and much more difficult to install. Then for a bike...
    view full answer...
  • Best Way to Transport Expensive Bikes with a 2010 Honda Accord CrossTour
    We have hitches that are designed to fit your 2010 Honda Accord Crosstour. Hitch mounted bike racks are the way to go, especially for transporting expensive bikes for a long period of time. For a hitch you would want the Curt Hitch part # C11002 as this has been confirmed to fit your vehicle. For a top-of-the-line bike rack to use with this hitch I would recommend the Thule T2 Bike Rack part # TH9045. This rack is compatible with the hitch I referenced, can lock to your hitch and lock...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Brent H
Test Fit:
Brent H
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Mike H
Video Edited:
Mike H
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.