See what our Experts say about this CURT Trailer Hitch

• Trailer Hitch Recommendation for a 1989 Chevy K1500
  The Curt 3-Piece Trailer Hitch Receiver # C15511 will fit a 1989 Chevy K1500 if it's the cab and chassis model. Since you have a pickup we need to find a different hitch. If your Chevy has the standard or step bumper then I recommend checking out the etrailer hitches; part # e88AR if you have a crew cab or part # e29KR if you don't have a crew cab. These are lower capacities than the Curt hitch you currently have but it matches more closely to what your truck is really capable of pulling. If...
  view full answer...
• Hitch for 1997 GMC C/K with Roll Pan Bumper that Fits Behind License Plate
  We have the Curt hitch part # 13942 which would be exactly what you are looking for. This fits your 1997 GMC Sierra with a roll pan and would put the hitch opening right behind the license plate like you are wanting as well.
  view full answer...
  
• Which Hitch Fits 1993 Chevy Silverado with Roll Pan Bumper
  For your 1993 Chevy Silverado that has a roll pan rear bumper we have the Curt Class III hitch part # 13942 as a confirmed fit that would work great. This does put the hitch opening behind the rear license plate like you mentioned as well. See attached picture.
  view full answer...
  
• Receiver Hitch for 1989 Chevy C1500 With Roll Pan Bumper
  We've got you covered. You'll want to use the Curt # 13942 Class III hitch that you'd looked at. This hitch is specifically designed for vehicles with a roll pan, and would install behind the license plate. The hitch install could interfere with your under-bed spare tire, you might need to reposition the tire. I've provided a photo showing the hitch once it's installed.
  view full answer...
  
• Which Trailer Hitch Receiver For 1992 Chevrolet CK 1500 With Standard Bumper
  I have another option but the Curt Trailer Hitch Receiver # 13942 will not fit on your 1992 Chevrolet CK 1500 if you do not have a roll pan. This is due to the fact that the roll pan hitches sit higher up and require a cut out in the roll pan for the hitch. With your standard bumper the hitch would be behind the bumper instead of under it. As long as you have a standard rear bumper I recommend the Curt Trailer Hitch Receiver # C13042 which will put the receiver tube under the bumper,...
  view full answer...
  
• Hidden Trailer Hitch for 1994 Chevy C/K that Fits Behind Roll Pan Bumper
  We have hitches designed to fit behind a roll pan bumper installed on your 1994 Chevy C/K but the capacity is about half what you mentioned. For that we have the Curt # 13942 which has a towing capacity of 5,000 lbs trailer weight.
  view full answer...
• Which Hitch Fits 1994 GMC 3500 with Roll Pan Rear Bumper
  For your 1994 GMC 3500 with a roll pan bumper we have the Curt hitch part # 13942 as a confirmed fit. This fits without drilling as well.
  view full answer...
• Recommended Trailer Hitch Receiver For 1991 Chevrolet C/K 1500 Stepside W/ Roll Pan
  I reached out to my contact at Curt and for your 1991 Chevrolet C/K 1500 Stepside Pickup with a roll pan the Curt Trailer Hitch Receiver # 13942 should work but you will need to measure the width of your frame to confirm. As long as your frame measures 34-3/4" wide the # 13942 will fit perfectly and will work perfectly with your roll pan.
  view full answer...
• Trailer Hitch for 1990 GMC Sierra With Roll Pan Bumper
  We do have an option for a trailer hitch that will fit your 1990 GMC Sierra with your customized roll pan bumper but Draw-Tite 40050 will not work. The hitches that are confirmed to fit your truck are the Draw-Tite # 41522 and Curt # 13942, though these will require you to cut your bumper for receiver access. If you (understandably) do not want to do that another option is the universal fit Draw-Tite # 41990-16 which fits frames up to 44 inches wide and has 16 inch tall brackets. This...
  view full answer...
  
• Trailer Hitch Recommendation for a 1996 Chevy C/K Series 1500 Pickup Truck with Dual Exhaust
  The Curt Trailer Hitch, # 13942, is designed to fit if the truck has a roll pan. There is no restriction if the truck has dual exhaust. I have included a link to the installation instructions for this hitch for reference. This is the only hitch specifically designed for use if the truck has a roll pan. I have included a link to all of the trailer hitch options for a 1996 Chevy C/K 1500. Just select your specific truck style from the pull down menu under where it reads Select Vehicle Style...
  view full answer...
• highest Capacity Trailer Hitch for a 1990 Chevy C1500 with Roll Pan Bumper
  For the 1990 Chevy C1500 with a roll pan bumper the highest capacity trailer hitches available are Class III hitches such as # 13942. This hitch is rated for 500 pounds tongue weight and 5,000 pounds gross trailer weight. When used with weight distribution it is rated for 800 pounds tongue weight and 8,000 pounds gross trailer weight.
  view full answer...
• Trailer Hitch Recommendation for a 1992 GMC 3500
  Draw-Tite trailer hitch # 41947 fits the cab and chassis models of the 1992 GMC 3500 trucks. These are the trucks that do not come with beds and are turned into utility trucks, ambulance vehicles, and similar things like that. These trucks have a narrower frame width than the pickup models. If your truck's frame width is 34 inches wide measured from the outside of one frame rail to the outside of the other then this hitch will fit. If you have a regular pickup model with a standard/step...
  view full answer...
• Trailer Hitch for a Lifted 1997 Chevy C/K Series 1500 Truck
  Cab and chassis models are what they use to make service vehicles like flat beds and utility trucks. They have frame rails that are more narrow. If your truck can with a bed on it then it is most likely not a cab and chassis. Since the truck is lifted, adding a roll pan does not necessarily mean that you have to get the roll pan bumper hitch. I will depend on how the roll pan mounts and how far it comes down. You will want to look at the instructions for the roll pan hitches, like #...
  view full answer...
• Trailer Hitch Recommendation for 1997 GMC C/K with Roll Pan Bumper
  The highest capacity we have for your 1997 GMC C/K with a roll pan we have the Curt hitch part # 13942 which is a confirmed fit and would work well. This has a 5,000 lb total trailer weight capacity.
  view full answer...
• Will Reese Hitch 37042 Fit a 1998 Chevrolet C/K Series Pickup
  The Reese hitch 37042 that you referenced is discontinued and was a fit for the first generation Ford Escape. We do offer hitches for your 1998 Chevrolet C/K Series Pickup that can be seen on the link provided. You can use the Select Vehicle Style drop-down menu at the top of the page to select the truck version you have. If you are uncertain of the type of bumper you have you can refer to the linked article for illustration. For instance, if you have a roll pan bumper you can install...
  view full answer...
• Trailer Hitch Receiver Compatibility For a 1996 GMC Sierra C/K Pickup
  The Curt Trailer Hitch Receiver # C15325 is confirmed to fit your 1996 GMC Sierra XLE as long as you have either the standard or step bumper. It will not fit if your GMC has a roll pan, or deep drop bumper. For a deep drop bumper Curt Trailer Hitch Receiver # C15317 is the one I recommend. The Curt Trailer Hitch Receiver # 13942 will fit with a roll pan rear bumper of 1500 series trucks. You will need a Hopkins Plug-In Simple Vehicle Wiring Harness # 41125 to give you a 4-way flat...
  view full answer...
• Will Curt Trailer Hitch be Hidden Behind License Plate on 1997 Chevy C/K Pickup with Roll Pan Bumper
  Yes, the Curt Trailer Hitch, # 13942, will be hidden behind the spring loaded license plate on your 1997 Chevrolet C/K Series Pickup with a roll pan bumper. I have included a link to the installation instructions for this hitch for reference. This is the only hitch specifically designed for use if the truck has a roll pan. For wiring, you will need Tow Ready Custom Fit Vehicle Wiring, # 118315. I have included a link to the installation details and video for reference.
  view full answer...
• Trailer Hitch for a 2001 GMC Sierra 1500 Stepside Bed With Roll Pan Bumper
  There is a trailer hitch designed to work on the 2001 GMC Sierra 1500 with a roll pan bumper. You can use Curt hitch # 13932. Since your roll pan bumper already has the cut out you will not need to trim any more. I have linked a video showing the Curt hitch being installed. If you plan on doing some towing you might be interested in etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage...
  view full answer...
• Trailer Hitch Fitment for 1998 Chevrolet C/K 1500 Pickup Truck
  Yes the discontinued Curt Trailer Hitch 37069 will fit on your 1998 Chevrolet C/K 1500. It will require drilling to be installed. I recommend the Curt Trailer Hitch Receiver # C14081 for you as this will allow you a no drill installation. This hitch is designed to work with the standard or step bumper on your year truck. If your Chevrolet has the roll pan rear bumper the Curt Trailer Hitch Receiver # 13942 will be the correct hitch. The Hopkins Plug-In Simple Vehicle Wiring Harness...
  view full answer...
• What is the Bolt Hole to Bolt Hole Width of the Curt 13942
  The Curt # 13942 has the following bolt hole to bolt hole measurements. The bolt hole closest to engine and middle hole- 34-3/4" apart center on center. The bolt hole closest to the rear of the truck- 34-1/8" apart center on center. I've also linked an image with these dimensions.
  view full answer...
  
• Trailer Hitch and Wiring Harness for 1994 Chevy 1500 C/K Step-Side Pickup with Roll Pan Bumper
  The best hitch option for your 1994 Chevy 1500 C/K step-side pickup with a roll pan bumper is the Curt 2-inch hitch # 13942. I confirmed with my contact at Curt that this hitch will work fine with your bed and bumper style. It is rated for 5000-lbs trailer weight or 8000-lbs if weight distribution is used. For wiring you can use 7-way kit # 20023 or 4-pole kit # 118315.
  view full answer...
• Recommended Trailer Hitch for 1989 Chevy C/K Series Pickup with Roll Pan Bumper
  For your 1989 Chevy C/K Series Pickup I recommend the Curt Class III Trailer Hitch # 13942. This will fit your truck with the roll pan and the only slight modification you will need to do on the bumper is to cut in the license plate area so the hitch receiver can be accessed. Also please note that this hitch will only fit the 1500 models (there is not a hitch available for the 2500/3500 models with a roll pan bumper). This is a heavy-duty Class III hitch that will provide you with a 2...
  view full answer...
• Recommended Trailer Hitch Receiver For 1991 Chevrolet C/K Pickup W/ Roll Pan
  As long as your 1991 Chevrolet C/K Series Pickup is a 1500 I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13942 which is designed to work with trucks that have a roll pan installed, but you will need to cut a hole in the roll pan behind the license plate for the hitch to work. At this time there is not a trailer hitch receiver for the 2500/3500 trucks with a roll pan. The # 13942 has a 500lb tongue weight rating and 5000lb trailer weight rating making it a...
  view full answer...
  
• Trailer Hitch For a 1997 Chevrolet C/K Pickup With Sport Side Bed
  The hitch you choose will depend on your rear bumper type on your 1997 Chevrolet Pickup. For a standard or step rear bumper the Curt Trailer Hitch Receiver # C14081 is a class IV hitch with a 2" receiver. Maximum trailer weight is 10,000lbs and 1,000lbs tongue weight with standard hitch. A weight distribution hitch will allow for 12,000lbs of trailer weight and 1,200lbs of tongue weight. Be sure not to exceed the weight ratings given by Chevrolet for your specific truck. If you have...
  view full answer...

Do you have a question about this Trailer Hitch?