Aluminum fold-down steps with 13" deep top step attach to the threshold of your RV. Designed to fit 29" to 36" wide doorways. Industry standard 8" drop/rise between steps. Adjustable legs keep the steps level on uneven ground.
Features:
Specs:
Will Lippert SolidSteps Work for You?
Fold-down steps are typically installed on travel trailers and some RVs. The fold-down steps from Lippert lift up to latch into your camper's doorway for storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert SolidSteps install inside your camper's doorframe. Measuring for this may seem tricky, but once you know what to look for, figuring out the right fit for your RV doorway is easy.
Measure between the door frame flanges - the doorway width - to determine the step size that will fit into your camper's doorway. You will need a doorway that is at least 29" wide to 36" wide for these steps to work.
If it turns out you have a wider or narrower doorway, there are other step assemblies that fit doorways ranging from 24" wide to 36" wide. A full list of the available steps is below.
To make sure your doors will close when the steps are installed, measure from the top of the threshold plate to the bottom of the door. You will need a gap of about 1/4" to 3/8" to allow the door to close over the step's mounting plate.
The doorway threshold will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, and it will tell you how many steps you need.
Once you know your doorway width and entry heigh measurements, the chart below will tell you which part number you need. This page's step assembly is in bold text.
| Doorway Width | Entry Height | etrailer Part Number |
|---|---|---|
| 24" | 22" - 28" | LC713662 |
| 25" - 28.9" | 22" - 28" | LC733931 |
| 27" - 36" | LC791572 | |
| 35" - 44" | LC791574 | |
| 29" - 36" | 22" - 28" | LC733932 |
| 27" - 36" | LC791573 | |
| 35" - 44" | LC791575 |
How Do You Install the Steps?
To install the steps:
-Secure the hardware (not included) but dont tighten
-If necessary, loosen the bolts on the latching arm to adjust
California residents: click here
Do you have a question about this RV Step?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.