7" Wide x 22-1/2" long x 8-1/4" tall. This sturdy, rounded fender protects your trailer from road debris. 16-Gauge, ribbed steel with double-radius edges is durable. Bolt or weld onto your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today I'm been take a look at this etrailers single axle steel trailer fender with the ribs for eight inch wheels. It is for a quantity of one fender. Now this rounded fender will cover one tire on your single axle trailer. It'll act as a splash guard, helps keep any road debris from hitting other vehicles, and it'll also help protect your trailer's cargo.
I'm going to zoom in. If you notice on this one, I'm want to show you the edges. Both the inner and outer edges on this have a one inch curve radius lip. Gives it a nice clean finished look to it, and it is a sturdy ribbed 16 gauge cold roam steel construction in a raw finish.Now this can be primed and then painted to provide even more resistance for corrosion and to match your trailer's paint finish. Do you notice the two ribs right on here They are stiffener ribs.
They are designed to help eliminate flexing of the fender. Now this is a weld-on or bolt-on installation. It is not pre-drilled. The mounting brackets for bolt-on installation are sold separately. This part is made in the USA.
It is for a quantity of one fender. Application, again, is for single axle trailers with eight inch wheels. Weight on this is about five pounds, and the last thing I want to do is just give you some dimensions on this. The overall length from this end to this end, is going to be right at 21 and three quarter inches long. The height from very bottom to very top is right at eight and a quarter inches tall, and the total width right at seven inches wide, but that should do it for the review on etrailer single axle steel trailer fender with the ribs for eight inch wheels for a quantity of one..
Average Customer Rating: 4.8 out of 5 stars (1850 Customer Reviews)
7" Wide x 22-1/2" long x 8-1/4" tall. This sturdy, rounded fender protects your trailer from road debris. 16-Gauge, ribbed steel with double-radius edges is durable. Bolt or weld onto your trailer.SUPPER fast shipping.Great customer ser vice
fenders are actually sturdier than expected and arrived early very satisfied
Review from a similar Single Axle Fender in Trailer Fenders
Very good fenders. Look very nice on trailer. Also changed hubs, pictures are after and before changes. Highly recommend getting the mounting brackets as well.
Review from a similar Single Axle Fender in Trailer Fenders
Fenders were packaged well, shipped quickly and are stout. Prior to install, sanded, clear coated and under coated. Nice upgrade for our tear drop trailer.
Review from a similar Single Axle Fender in Trailer Fenders
The fender was good quality & it seemed priced right.
The standard shipping was pretty quick. Only 3 days from ordering. And pretty much across the nation.
The packaging was a little lacking. Put in a box with no packing. Slight dented. But not enough to call them. Although one of the fenders I ordered a few years ago had to be sent back.
All in all … a great company to deal with!
Customer support is wonderful!
Review from a similar Single Axle Fender in Trailer Fenders
Great fender. Installed on a Four Winns boat trailer. Nearly exact match for original. Had it powder coated along with full trailer. Strong. Easy to stand on. Highly recommended.
Review from a similar Single Axle Fender in Trailer Fenders
I used these steel fenders to replace aluminum fenders on my utility trailer after one had fallen off along the road somewhere. Prior to installing these I painted them with Krylon Fusion gloss hammered metal spray paint, which has held up well.
Review from a similar Single Axle Fender in Trailer Fenders
It is exactly as described except for the ends which both have a slight bow in them. I am not using this for a trailer and need the shape and size as close to perfect as possible. Hopefully my straightening skills will be up to par. Every other part of this transaction was excellent.
Review from a similar Single Axle Fender in Trailer Fenders
Very disappointed in the attachment of backing plates. Two fenders should be mirror image of each other. Apparently an alignment jig is not used in production. This makes for difficult and different mounting from each side.
Jenny N - 02/25/2022Review from a similar Single Axle Fender in Trailer Fenders
The fenders were a perfect addition for my UTV trailer. Great quality and easy to mount. The ribs look great too.
Review from a similar Single Axle Fender in Trailer Fenders
These fenders fit and look better than I thought. Of all of the products that I have bought, I've never had any problems with them not fitting or look right.
Review from a similar Single Axle Fender in Trailer Fenders
Killer product. Super high quality and they significantly improved the look of the trailer.
Review from a similar Single Axle Fender in Trailer Fenders
Salvaged a 1982 Coleman Versa Trailer, fenders were missing so I bought these. Look great.
Review from a similar Single Axle Fender in Trailer Fenders
Nice fender, perfect match for my small utility trailer.
Review from a similar Single Axle Fender in Trailer Fenders
Fast service,quality products
Review from a similar Single Axle Fender in Trailer Fenders
Very high quality. Rebuilt a trailer that had been sitting on the ranch full of junk for 15 years. Had a mobile home axle and wheels on it. eTrailer had the perfect size fender. ready to paint...no prep needed.
Langford J - 12/27/2021Review from a similar Single Axle Fender in Trailer Fenders
Welds on the backing onto the fender were poor and delivered broken. I will have to reweld these myself.
Sierra K - 06/28/2022Review from a similar Single Axle Fender in Trailer Fenders
Other than fenders being out of stock at the time, (which didn't matter as I could not put the fenders at the time I ordered them), I received the fenders in great shape. I welded the fenders on to the trailer and have towed the trailer approximately 4500 miles with no trouble. The fenders are very sturdy and well made. etrailer will get my business again. The sales people were very helpful and kept me informed as to when the fenders would be delivered. I would like to send a picture, but as of now I am in Florida until April and the trailer is in Missouri. Thanks a lot.
Review from a similar Single Axle Fender in Trailer Fenders
These are good fenders. Unfortunately the snow came off the roof twice and took one fender off each time.Not the fault of the fender. But being steel I was able to beat the fender back into shape with a block of wood and re-attach it.
The fender did survive a thousand pounds of ice crushing it fairly well all things considered and it's still useable.
Review from a similar Single Axle Fender in Trailer Fenders
Replacing aluminum fenders which came on my enclosed trailer and have taken a beating in Saskatchewan and North Dakota while hunting. These steel fenders look great and I’m sure they are a lot more durable than the aluminum.
Review from a similar Single Axle Fender in Trailer Fenders
Great fenders for the price especially coming with the backs all ready installed.
Review from a similar Single Axle Fender in Trailer Fenders
The fenders I purchased were for my single axle box trailer. They fit perfectly, were easy to install and to this day are still mounted solid. Great [email protected]
Review from a similar Single Axle Fender in Trailer Fenders
Very happy with my purchase. Trailer fenders arrived promptly, not to mention free shipping with this purchase. They were packaged very securely and in great condition! No surface rust, dints or dings. Would recommend etrailer.com for all your trailering needs.
Review from a similar Single Axle Fender in Trailer Fenders
I thought the fenders were excellent! And I believe I paid a great price. I replaced the fenders on a 12 foot utility trailer that has 15" tires. I thought they fit well, and I bolted them on (even though I understand your not supposed to.) I used a solvent to remove the oil from the fenders, primed them, and painted them. I was grateful that they were not rusty when I received them. Good job everyone. No dents in packaging and delivery either. Again, good job.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.