Metal Fenders to Fit with Kenda 4.80/4.00-8 Tires
Updated 11/03/2025 | Published 01/05/2025
Products Featured in This Question
Question:
I am looking for METAL fenders to fit the KENDA 4.8x4 trailer tires. I would prefer them to have a skirt or backing plate but can work with a plain fender. Can you let me know which ones will work ?/ Thanks
asked by: Bryan G
Expert Reply:
Hey Bryan,
The metal fender I recommend picking up to match with your Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel # AM30000 is the etrailer # HP89VR.
This comes as a single unit, so you'll need to order accordingly, and it doesn't have a skirt or backing plate, but we do have a mounting bracket kit # CE26065PGA that can be used for the installation.
Product Page this Question was Asked From
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 4.80/4.00-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Q&A: Can 8 Inch Trailer Tires be Replaced with 12 Inch Trailer Tires
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement Weld on Trailer Jack for a Phoenix Boat
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Recommended Replacement Wheels/Tires for 1985 Coleman Tent Trailer
- Q&A: Recommended Higher Speed Rating for 4.80/4.00-8 Trailer Tires on Small Trailer
- Q&A: Interior Depth of Lipper SolidStep when Folded Up
- Q&A: What Pilot Hole Size Do The 4.80/4.00-8 Trailer Wheels Typically Have?
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How Much Solar Power Do I Need For My RV?
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
Jon G.
11/3/2025
Hey Bryan, how did the metal fender and bracket kit work out with your Kenda trailer tires? Your update could make it easier for the next person trying to match a similar setup.