Will the 5,200 lbs Trailer Axle Beam w/ Easy Grease Spindles Work w/ Dexter 8-201 Drums?
Updated 09/12/2025 | Published 08/25/2025
Products Featured in This Question
Question:
Hello, Will this axle accept Dexter 8-201 drums and Dexter backing plates? Thanks
asked by: Douglas
0
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 5200 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: Which MORryde Suspension Upgrade Kit for 2-5/8" Shackles
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: Replacement Options for a Lippert 5,200 Lb Axle
- Q&A: Replacement Suspension Parts for 2022 Keystone Cougar 316RLS with Dexter 6760401 Axle
- Q&A: Can Straight and Cambered Axle be Used on Tandem Axle Trailer
- Q&A: Recommended Leaf Springs, U-Bolts, and Suspension Bolts for a 2,000 lbs 1-3/4" Diameter Axle
- Q&A: Should Leaf of Trailer Leaf Spring be Removed to Lower Capacity
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Raise Your Travel Trailer Height
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure a Trailer Axle
Jerred H.
9/12/2025
Hey Doug, did the axle work out with your Dexter drums and backing plates? I'm curious to know because it could help others with similar setups.