Round trailer axle beam measures 94" from hub face to hub face (when hubs - sold separately - are mounted) and 79" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
Features:
Specs:
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.
Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
Average Customer Rating: 4.8 out of 5 stars (688 Customer Reviews)
Round trailer axle beam measures 94" from hub face to hub face (when hubs - sold separately - are mounted) and 79" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
Thanks to the people and the videos at etrailer, this was pretty simple. My old axle was bent. so I used the information on the site to measure and select the correct axle. I was extra careful, but it really was just a plug and play. I used the trailer quite a bit put at least 8000 miles and the tires are perfect. So I am super happy with my purchase and it save a LOT of money over what the shop would have charged.
Shipping time was great! The only problem was the bottom plate hole spacing for the U-Bolts was not wide enough for my springs. I used the old plates and all went together fine.
The axle was a perfect fit. Was less than an hr to swap out. Simple to grease the bearings now.
I replaced one axle with a 5200 one and it’s been great. Now I’m going to replace both with 6000 lbs axles but it’s going to be in the fall.
Product was great. However, there was insufficient protection at the axle ends and it looked like the axles were dragged and fully exposed the spindles. One spindle lock nut was lost and one brake flange stud was also missing.
We are very pleased with the price, quality and shipping that etrailer offers. Their customer service is very good, though we had no troubles. They keep closely in touch throughout the entire process, this makes an online purchase seem very person. We would recommend etrailer to anyone.
Axle arrived in perfect condition, was also an exact fit for my Top Hat Trailer.
Your staff was of great help finding my right axle.
I would recommend etrailer to everyone.
The only place to buy trailer parts
Super friendly and knowledgeable
Free shipping
It’s a no brainer
I called to confirm fitment and availability. I then place the order on line on Wednesday and the axle showed up Friday evening. You can not beet that! Local suppliers where about $75.00 more and I had to go pick it up an hour each way!
THANKS ETRILER FOR TAKING CARE MY ONLINE ORDER THE DEXTER TRAILER AXLE WAS PERFECT FOR MY NEW INSTALLATION I DONT NEED TO WORRY ABOUT THE EXTRA LOAD ON MY BOAT TRAILER
I had bought a used car hauler that obviously been overloaded in the past. Both axles had been sprung and were causing tire ware and overheating. It is nice to see both axles with proper camber.
High quality axle, delivered on time, and a prefect fit.
I'm always comfortable and happy to purchase products from etrailer.
Easy ordering, quick shipping and prompt notification of each step of the process. The axle was exactly as advertised and fit my trailer perfectly. I am so glad I found etrailer, and will definitely recommend to my friends.
So far so good The wiring diagram was spot on
You were great to the way you help me resolve my problems. The axle is the correct one I needed. Just one small thing I found that it was missing two mounting studs.
E trailer is the bomb. Super customer service and communication. 10 stars.
I replaced the noodley Lippert axles that bent on my utility trailer. Much better. They also have the proper bend in them for the load compensation. I took the part number off the Lippert axle, and etrailer was able to cross reference the part numbers for perfect fit.
Check your order! I specifically ordered Dexter axles and they sent me generic ones.
Just what I needed for my boat trailer. Thanks
Part was a great fit & delivery was on time and properly packaged.
Definitely recommend & I will use this company if future trailer parts are needed.
PLACED THE ORDER LATER THEN USUAL AND STILL RECEIVED THE AXLE THE NEXT DAY, GOT MY CUSTOMER UP AND GOING A DAY SOONER, WE ARE VERY PLEASED WITH E TRAILER AND THEIR CUSTOMER SERVICE. THANK YOU.
I'd like to thank odella and Kate for taking such good care of my order.
I first talked to Odella and had to break off the conversation for something else called back and Kate took my call and was able to fulfill the order and take all my information very nice dealing with the company that has their people in the United States and you're not talking to a computer!
Also was really shocked I received the order 2 days early really good work!
Was delivered just as described. Tech help is amazing. They actual listen.
Worked out great, replaced the damaged one and matched up with the other axle
I received the items in a very timely fashion and in great shape. I torched off the old U bolts and removed the axle. I removed the new spring seats using a cut off wheel in my grinder and moved them inward one inch on each side, then MIG weld the new ones on they lined up perfectly to the old ones. I then installed the new U bolt kit and torqued them down to 65 foot lbs. The old bearings were only one year old and reused them after cleaning. I installed new seals at this time. The brake pads were same age as bearings showing little wear. The old axles were not Dexter axles and rusted from the inside out then broke off by the drop.. I replaced both. Was a pleasant experience and would do it all over again.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.