See what our Experts say about this TruRyde Trailer Suspension Parts

• Correct Bearing Kit for a Curt 5,100 lbs Axle
  Thanks for the information and picture James! Your Curt 5,100 lbs capacity axle uses item # 25580 inner bearings and item # LM67048 outer bearings. So you would need the Bearing Kit item # BK3-300, which includes both bearings, along with both races, a grease seal and cotter pin. You'll need one kit per hub. As far as a replacement axle goes you wouldn't be able to upgrade to a 6,000 lbs axle and keep the same hubs. The 5,200 lbs Dexter Trailer Axle Beam with E-Z Lube Spindles item #...
  view full answer...
• Lookiing To Upgrade Axles On 2015 Keystone Cougar 33RBK
  Hello Rene, thanks for reaching out. It is pretty typical for RV manufacturers to use axles that are not rated for the full GVWR. They say this is because 10%-15% of the camper weight is on the hitch instead of the axles. They will put the bare minimum axle on there to save on costs. Very typical in the RV industry these days sadly. It is possible to use a higher rated axle. For the 86-1/2" axles we have a 6,000 lb option. We offer it fully loaded with brakes and 6-lug hubs as part #...
  view full answer...
• Replacement Axle for a 4,400 lbs AL-KO Axle
  Hey Shane! The closest axle we have to those dimensions is the Trailer Axle w/ Electric Brakes item # e73SR. It has a 86-1/2" hub face and a spring-center-to-spring-center length of 71-1/2". You may be able to get away with the hub face being slightly longer depending on your fenders but you'll need to use the Spring Seat item # TRSS300 to replace the ones that come with the axle.
  view full answer...
• Replacement Axles for D44 Axle With 86-1/2" Hub Face Measurement
  The Dexter Trailer Axle # 8327816-EB would be your best replacement option. This includes the hub/drum and brake assemblies so you won't have to piece that together separately. It matches your 86-1/2" hub face measurement but the spring center is a little off. You will need to cut off the spring seats and weld on # TRSS300 to match your 68-1/2" measurement. You will also need the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles # APUBR-8.
  view full answer...
• Replacement Axle for 2018 Grand Design Imagine 2150RB
  Grand Design lists an 86-1/2" 3,500 lb axle for your Imagine 2150RB. The next size up would be a 5,200 lb axle like the # e45GR. This has the same 86-1/2" hub face measurement but the spring seat is different. You will need to cut off the spring seats and weld on # TRSS300 to match your current 68-1/2" measurement. The CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles # CE23003 will be required as well. For a hub and drum assembly you can use the # AKHD-655-6-EZ-K. These...
  view full answer...
• Should Spring Seats be Welded to Trailer Axle
  Yes, you need to weld the spring seats # TRSS300 to the axles # 8327834 that you referenced.
  view full answer...
• Can Trailer Axle Spring Seats be Relocated If Needed
  You can weld on new spring seats on your axle without compromising the integrity. So if you went with the part # 8327826 you could install the new seats with part # TRSS300 which would be easier than moving the brackets on the trailer frame. The extra width of the wheels being pushed out would not be an issue either. Going to a spring with more leaves would not be an issue either. We have the part # e94SR which is a 6 leaf 6k axle spring that is 26 inches long as well.
  view full answer...
• Over-Under Conversion Kit for 7k Axle With Slipper Springs
  Hi Brian; we do not have a kit that will work as is but the # K71-385-00 will do what you need with some extra steps. The spring seats will need to be fully welded to the axle since the slipper springs shift back and forth. You will also need to replace the U-bolts since they're only 7" long. I would not replace them using your existing U-bolts so you will need to find new ones. Unfortunately, we don't have any that are 9" long. Also, the U-bolt plate is designed for 1-3/4" wide double...
  view full answer...
• Upgrading Axle Capacity on 5th Wheel With 3,500 lb Axles
  Hi David; a trailer wouldn't be designed where it exceeds the axle capacity without even being loaded. The axles will always be able to handle the GVWR of the trailer. You might not be factoring in the pin weight, which is weight that won't be sitting on the axles. The same is true for tongue weight on bumper pull trailers. You can still upgrade the axles if you want, but it won't actually increase the capacity of the trailer. Even if you swap out the axles, leaf springs, and hubs you...
  view full answer...
• Recommended Dexter Axle w/a 6,000 lbs Capacity and a 86-1/2" Hub Face
  Hey David. The Dexter Trailer Axle Beam with E-Z Lube Spindles item # 8327826, you were looking at, is our closest option. It's got the 6,000 lbs capacity and the 86-1/2" hub face dimension, however the spring seats are mounted at 71-1/2". The Dexter item # 8327826 is a 3" diameter axle so if you're unable to find one with spring seats at 68-1/2", you can install two of the Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter item # TRSS300. Did you break...
  view full answer...
• Recommended 6,000 lbs Axle w/ 86-1/2" Hub Face and Braking Hubs w/a 6 on 5-1/2 Lug Nut Pattern
  Hey Jeff not sure what else it is you're looking at. The Trailer Axle w/ Electric Brakes item # e73SR come with spring seats welded onto them at 71-1/2" apart. This is measured from the center to the opposite center of the mounting bolts. This is one of our etrailer branded axles. The etrailer item # e73SR is a 6,000 lbs axle with a 86-1/2" long hub face and comes with easy grease braking hubs that have a 6 on 5-1/2 lug nut pattern. I attached a diagram below so you can see these measurements....
  view full answer...
• Do You Have a 6,000 lbs Axle w/ a 89" Hub Face?
  Hey Val. Our Trailer Axle Beam with Easy Grease Spindles item # e23GR is going to be the best option for a 6,000 lbs capacity axle that's 89" long. We don't have any axles with a 68.5" spring seat so you'll need to have a welder install two of the Spring Seats item # TRSS300 per axle to attach the axle to your suspension. The spindles fit item # 25580 inner and item # 15123 outer bearings. You'll also need a set of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles...
  view full answer...
• Option For Replacing 3,500 lb Axle Part Number AADULE359582
  Thanks for getting in touch, Stanley. The part number AADULE359582 you provided indicates a 3,500 lb axle with a 95" hub face and 82" spring center. We offer a 5,200 lb replacement for this, the Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 lbs # e63GR. This axle has spring seats pre-welded at 80", so they will need to be removed and have new spring seats # TRSS300 welded on at 82". This axle tube is 3" in diameter so you will need new U-bolts such as part # CE23003....
  view full answer...
• Replacement Axle Beam for 2020 Grand Design Reflection 315RLTS
  Hi Gina; from what I was able to find that is an 86-1/2" long 5,200 lb axle. For a replacement you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327816. However, this axle has a spring center measurement of 71-1/2" and it looks like yours is 68-1/2". You can verify this by looking at the axle tag, the measurement will look like "SC=68.50." Assuming that is correct, you will have to cut off the spring seats and weld on # TRSS300 to match your current measurement. What...
  view full answer...
• Is There an Over-Under Kit for a 2-3/4" Diameter Mobile Home Axle?
  Unfortunately Hans, we do not have an over under kit specific to mobile home axles as they were designed to be used to get the mobile home to where it needs to be and thrown away after they were done. Several people saw these as a cheap opportunity to get an axle and make home made trailers. But none of the trailer manufacturers provide support parts for them. You're only real option would be to weld on some new spring seats but again as it is an uncommon diameter tube we do not have an...
  view full answer...
• Replacement Dexter D52 Trailer Axle with 86.5" Hub Face Length
  It sounds like you're looking for the Dexter Trailer Axle Beam part # 8327816 which is 86.5" long at the hub face and has a 5,200 lb weight capacity. The spring seats however will need to be moved in for your application which requires tack welding so bear this in mind, you'll likely want part # TRSS300 to go with as removing the old ones cleanly is difficult. If you're looking to save some cash we do have this same axle through our in-house brand as part # e45GR.
  view full answer...
• Replacement Options for 85" Lippert 4,400 lb Axle
  Hi John; what you have there is a Lippert 4,400 lb axle that is 85" long with a 68-1/2" spring center measurement. 4,400 lb axles are obsolete so you're looking at upgrading to a 5,200 lb axle. The closest thing we have is the Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long # e45GR. This would stick out an additional 3/4" on either side of the trailer which wouldn't be too much if you don't mind the tires sticking out a little further. You will also need to cut off the spring...
  view full answer...
• 86-1/2 Inch Long Axle Option For Grand Design Trailer
  Hi there Andy; thanks for that info, and while we don't have 3,500 lb axles that are 86-1/2 inches long, we do have a 5,200 lb option with the Dexter Trailer Axle Beam # 8327816. The spring center you mention is an odd one, as the # 8327816 has 71-1/2" spring centers. What you can do if you like is have new spring seats welded on at the appropriate 68-1/2" distance. For that you'd need a pair of Spring Seat # TRSS300.
  view full answer...
• Determining Correct Axle Upgrade For 2018 Grand Design Imagine Travel Trailer
  I would be happy to make a recommendation for upgraded axles and suspension components for your 2018 Grand Design Imagine 2670MK, but first I will need a few measurements from your current components. Starting with the axle you will need to measure your current axles from hub face to hub face and from spring center to spring center to determine the correct length the replacement axle would need to be. For example the Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs...
  view full answer...
  
• Replacement for a Dexter 0121436 4,400 lbs Axle
  Hey Jay, thanks for the picture! I don't have that exact axle but I have one that's the same length but the spring seats are a different spot. It's the Trailer Axle Beam with Easy Grease Spindles item # e45GR. This is a 86-1/2" long axle with a 5,200 lbs capacity. You'll be able to use two of the Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter item # TRSS300 to move the mounting points on this axle to where they need to be at 68-1/2" to line up with...
  view full answer...
• Replacement Axle for a 84-1/2" Hub Face
  Hey Dave, thanks for the information. The closest axle I have to yours is the Trailer Axle Beam with Easy Grease Spindles item # e45GR. It has a slightly longer hub face at 86-1/2". The spring-center-to-spring-center length is 71-1/2" but these can easily be moved using a couple of the Spring Seat for Round Trailer Axles with 3" Diameter item # TRSS300. I do not have a set of hubs that fit the Trailer Axle Beam item # e45GR that have a 5 on 4-1/2 lug pattern. This axle uses item # 25580...
  view full answer...
• Upgrading Axles on a 2019 Forest River XLR Boost Toy Hauler
  Hey Gary! You can upgrade your axles and hubs using the Dexter Trailer Axle w/ Electric Brakes -item # 8327816-EB you were looking at. This axle has a 5,200 lbs capacity. You will need to remove and move the spring seats and replace them with the item # TRSS300. None of our axles have spring seats at the 68-1/2" location like yours currently do. These are sold individually so you'll need four. Additionally, you'll need two sets of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round...
  view full answer...
• Do You Have a 4,400 Pound Axle with HubFace Measurement of 86 1/2", Spring Center 68 1/2"?
  Hello Brad, The only option we have for you is to go with a higher rated axle, since the 4,400 lb axles aren't very common anymore. You’ll want the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K # 8327816-EB. The spring seats on this axle are at 71-1/2", so you’ll need to buy (2) of the Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter #TRSS300 and have them welded in place at the 68-1/2" spots you need. If...
  view full answer...
• Upgrading Axle on 2026 Keystone Cougar 260MLE
  Hi Gary; the highest capacity we have that matches your current axle length is 6,000 lbs. The Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long # 8327826 will work as a replacement. Since the spring center measurement is slightly different you will also need to cut off the spring seats and weld on # TRSS300 to match your 68-1/2" measurement. If you want brakes as well you can use the # 23-458-459.
  view full answer...