Replacement Axles for D44 Axle With 86-1/2" Hub Face Measurement

Updated 04/17/2024 | Published 04/16/2024

Products Featured in This Question

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K

(231)

$913.36

U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts

(2131)

$59.74

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

(649)

$11.96

Question:

I have a bent axles. Dexter D44, HF=86.5, SC=68.5, axel under the springs. I would like to upgrade to D52 axles. Please specify the parts.

asked by: Eric B

Expert Reply:

The Dexter Trailer Axle # 8327816-EB would be your best replacement option. This includes the hub/drum and brake assemblies so you won't have to piece that together separately. It matches your 86-1/2" hub face measurement but the spring center is a little off. You will need to cut off the spring seats and weld on # TRSS300 to match your 68-1/2" measurement. You will also need the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles # APUBR-8.

expert reply by: Robin H

Eric

4/16/2024

Ok, looks like everything except springs. I would need 26” double eye. Is there a kit that combines, springs, shackles, spring centering bolts and U-bolts?

Eric

4/16/2024

Also, I understand Dexter D44 and D52 axel beams are the same wall thickness. So, is the crown different to get the higher rating?

Robin H.

4/17/2024

@Eric we do not have a kit that combines everything like that. Since you have 26" leaf springs the # e27SR would be the best replacement. These are designed for 4,500 lb axles so they're rated a bit higher. There is no reason to get 5,200 lb leaf springs since none of this will increase the capacity of your trailer. If you want a shackle kit I would go ahead and upgrade with the MORryde Suspension Upgrade Kit. This comes with bronze bushings, wet bolts, and 1/2" thick shackles. You want to measure your current shackles center hole to center hole to find the right kit. For 2-1/4" use # MR46ZR and for 3-1/8" use # MR76ZR.