Replacement for a Dexter 0121436 4,400 lbs Axle
Updated 09/05/2025 | Published 09/04/2025
Products Featured in This Question
Question:
I’m looking for a replacement axle with the part no 0121436
asked by: Jay H
(click to enlarge)
Expert Reply:
Hey Jay, thanks for the picture! I don't have that exact axle but I have one that's the same length but the spring seats are a different spot. It's the Trailer Axle Beam with Easy Grease Spindles item # e45GR. This is a 86-1/2" long axle with a 5,200 lbs capacity.
You'll be able to use two of the Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter item # TRSS300 to move the mounting points on this axle to where they need to be at 68-1/2" to line up with your suspension.
What kind of trailer do you have and why are you needing to replace an axle?
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 5200 lbs
- Spindles Only
- 71-1/2 Inch Spring Center
- 86-1/2 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Search Results: propride
- Search Results: proride
- Search Results: proride hitch
- Shop: Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000 lbs
- Shop: Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors - 30" Lift - 6,000 lbs
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 5.2K-7K Axles
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Q&A: Replacement Axle for a 84-1/2" Hub Face
- Q&A: Does the Band Around the Spring Pack Go Forward When Installing Leaf Springs?
- Q&A: Need Replacement Axle for LCI 4400 LB axle that says 95.5/75
- Q&A: Can the Spindle Ends Be Replaced on an LCI52-SB-86.5-68.5 Axle
- Q&A: Replacement Axle Beam for 2020 Grand Design Reflection 315RLTS
- Q&A: Correct Bearings and Grease Seals for Dexter Axle # 8437302 on Keystone Cougar
- Q&A: What Are The Bolts Pointing Towards Hub On The etrailer Trailer Axle Beam # e33GR
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Double-Eye Trailer Suspension System Review
Jay H.
9/5/2025
I have a heartland north trail 29bhp the axle tube is bent from a collision