Replacement Dexter D52 Trailer Axle with 86.5" Hub Face Length
Updated 05/04/2026 | Published 02/07/2022
Products Featured in This Question
Question:
I am looking for a replacement axle Dexter D52 Part number: 3231287. It has a HF or 86.5 and SC of 68.5. Do you have a comparable axle? Thanks.
asked by: Craig
Expert Reply:
It sounds like you're looking for the Dexter Trailer Axle Beam part # 8327816 which is 86.5" long at the hub face and has a 5,200 lb weight capacity. The spring seats however will need to be moved in for your application which requires tack welding so bear this in mind, you'll likely want part # TRSS300 to go with as removing the old ones cleanly is difficult. If you're looking to save some cash we do have this same axle through our in-house brand as part # e45GR.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 5200 lbs
- Spindles Only
- 71-1/2 Inch Spring Center
- 86-1/2 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: 4-Leaf Double-Eye Spring for 5,200-lb Trailer Axles - 25-1/4" Long
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Search Results: trailer hubs and drums
- Video: Review of the Suspension Kit for Tandem-Axle Trailers
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Video: 4-Leaf Double-Eye Spring for 5,200-lb Trailer Axles Spec Review
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Search Results: 008~201~05
- Search Results: 010~054~00
- Search Results: 031~032~02
- Search Results: 25580
- Search Results: 031~030~02
- Q&A: Why Would Trailer Brakes Only Work With Manual Override Lever and Not Brake Pedal
- Q&A: Troubleshooting Weak Trailer Brakes That Won't Lock Up with Override Lever of Controller Slid
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: trailer axles
- Video: Dexter Trailer Hub and Drum Assembly Spec Review
- Video: Let’s Check Out the Dexter Trailer Hub and Drum Assembly
- Q&A: Bearing Kit & Seal For Dexter 031-030-02, 031-032-02 Bearings
- Q&A: Is Radius of Round Trailer U-Bolts part # SP01-060 Round or Flat
- Q&A: Replacement Brake Drum Hub Assembly For Dexter D44 4,400LB Axle
- Q&A: Does the Axle Need to Be Supported When Replacing U-Bolts on a Trailer Axle
- Q&A: Longer U-Bolts For 3 Axles For Roadmaster Roadmaster Comfort Ride
- Video: How to Install the etrailer Electric Trailer Brakes on a 2009 Carriage Cameo Fifth Wheel
- Video: Complete Breakdown of the Replacement Brake Adjuster Screw
- Video: HydraStar Electric Over Hydraulic Disc Brake Actuator Installation - 2017 Keystone Montana Fifth Whe
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
Vw
5/2/2026
Do you have a drop axle in that width?