Should Spring Seats be Welded to Trailer Axle

Published 08/28/2019

Products Featured in This Question

Dexter Trailer Springs Over-Under Conversion Kit

(834)

$80.12

Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs

(814)

$504.87

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

(657)

$11.90

Question:

In your last answer to “what happens if you don’t weld the spring seats #TRSS300 to the axles #8327834” I would like you to clarify your answer. I am not a mechanic so could you please explain in detail what you mean by “Axle might turn in the spring seats.” Also, what is the consequence to having the axle turning in the spring seats? Is this dangerous?

asked by: Stephanie H

Expert Reply:

Yes, you need to weld the spring seats # TRSS300 to the axles # 8327834 that you referenced.

expert reply by: Jameson C

Stephanie H.

8/28/2019

Also.... What happens if you dont weld the spring seats #TRSS300 to the axles #8327834?

Jameson C.

8/28/2019

If they weren't welded it's very likely the axle might turn in the spring seat. You really only have to tack weld them in one spot to prevent this for a double eye suspension setup. If the trailer had slipper springs you'd have to have them fully welded.

Stephanie H.

8/28/2019

Jameson C.

8/28/2019

Trailer axles have a bit of a bow to them which once you put the weight of the trailer on them they flatten out and you get the correct angle for the wheels tires. If the axle turns the alignment is going to be ruined and you'll most likely go through tires quickly and have other bizarre behavior too.