How Wide of a Space Between Standard Frame Hangers Can the MORryde X-Factor Crossmember MR33WR Fit?
Updated 06/14/2026 | Published 05/31/2026
Products Featured in This Question
Question:
I’d like to install a couple morryde X factor crossmembers part number MR33WR on my trailer. I see the minimum adjustment is 61”. My trailer is about 60” wide. Is it possible to make the crossmember fit this narrower width by making some adjustments at home? Thanks
asked by: Colin G
Expert Reply:
Hey Collin. If by adjustments you mean drilling new mounting holes, then yes but I don't recommend that. The MORryde X-Factor Crossmember item # MR33WR is designed specifically to fit lengths of 61" - 79-1/2" between the spring hangers. It's got predrilled holes and adding new ones is at the very least going to void the warranty but you could affect the structural integrity of the crossmember itself.
Short of making your trailer wider I don't know how else you would make the MORryde item # MR33WR fit. I wish I had an alternative solution for you that does not require modification but I do not.
The MORryde X-Factor Crossmember item # MR33WR is designed specifically for MORryde CRE, SRE, or stock suspension system. It is sold individually and includes the necessary mounting hardware.
If you have any additional questions, go ahead and click on the box that says Add Comment and I'll be happy to answer them.
(click to enlarge)
Colin G.
6/13/2026
Thanks for the response. The crossmembers fit without any modification.
Jerred H.
6/14/2026
Product Page this Question was Asked From
MORryde X-Factor Crossmember for Standard Frame Hangers
- Accessories and Parts
- Trailer Suspension Parts
- Crossmember
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: bumper mount rv cargo carrier
- Search Results: cargo trays
- Shop: Towing Mirrors
- Search Results: optronics tail light
- Search Results: amber trailer lights
- Video: Feature Breakdown: Low Profile LED RV Tail Light w/ License Bracket
- Video: Let’s Check Out the Longview Custom Towing Mirrors-LVT-1700
- Video: Towing Mirror Options - Custom Fit VS Universal Fit
- Shop: Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
- Q&A: Can Two Sets of Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets Be Used on Same Bumper
- Video: A Closer Look at the etrailer Enclosed Cargo Carrier for RV Bumpers
- Shop: 24x60 etrailer Enclosed Cargo Carrier for RV Bumper - Steel - 440 lbs
- Shop: 24x84 etrailer Enclosed Cargo Carrier for RV Bumper - Steel - 440 lbs
- Shop: etrailer RV Enclosed Cargo Carrier Kit with Cover - 60"
- Shop: etrailer RV Enclosed Cargo Carrier Kit with Cover - 84"
- Shop: Mount-n-Lock SafetyStruts Standard Bumper Brackets - 4" to 4-1/2" - Qty 2
- Shop: 24x64 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
- Q&A: Which Weigh Safe Weight Distribution for 1,300 lb Tongue Weight
- Search Results: weigh safe weight distribution hitch
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Q&A: Longer U-Bolts For 3 Axles For Roadmaster Roadmaster Comfort Ride
- Q&A: What is the Torque Spec for 1/2 Inch Axle/Suspension U-Bolts on 5200 Pound Trailer Axle
- Video: A Closer Look at the Dexter Trailer Axle Beam with EZ-Lube Spindles
- Q&A: How Far Apart Do the Spring Hangers Have to Be for the MORryde X-Factor Crossmember To Fit?
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Q&A: 5200 lb Axle Brake Assembly Torque Specs
- Search Results: roadmaster comfort ride
- Search Results: trailer suspension parts
Peter
6/7/2026
I installed the crossmembers and the CRE 3000 with wet bolts. I see no issue with trimming the length of the crossmembers to fit and drilling holes as required. your trailer is narrow and the springs are probably narrower than on my trailer. The new wet bolts may not extend out beyond the nuts when tightened, as they should. I talked with the factory about this and also a rep at a RV show and both said I had the correct bolts. I was not completely comfortable with what I felt were short bolts but I used them. I strongly recommend using RED LOCTITE ON THE WET BOLT THREADS. In general I am very pleased with the installation and would purchase them again. -+