Replacement MORryde CRE3000 Equalizer, Wet Bolts, and X-Factor Crossmember for a Triple Axle Trailer
Updated 02/05/2026 | Published 01/29/2026
Products Featured in This Question
Question:
I have a 2021 Heartland Cyclone 4006. I need to replace the suspension. I have found the springs EMCO/TRU52FR I am also wanting to replace the Morryde 3000 equalizers, shackles, wet bolts/brass bushings, ubolts and also add the morryde x-factor cross brace. Can you help me find all of the correct parts to complete this project?
asked by: Lance G
Expert Reply:
Hey Lance, welcome back! To replace your equalizers and shackles, I am going to need you to take a couple of measurements because I have no way of knowing what size the ones on your Heartland Cyclone are and we've got two options for both.
To the replace your MORryde CRE3000 equalizers, you'll need one of the following options:
MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers item # MR59ZR. The left and right mounting bolts on the main equalizer will be 6-1/2" apart from center to center.
MORryde Rubber Equalizers for Triple Axle Trailers item # MR39ZR. The left and right mounting bolts on the main equalizer will be 8" apart from center to center.
To upgrade your shackle straps, bushings, and wet bolts, you'll need the MORryde Suspension Upgrade Kit item # MR86ZR with 2-1/4" long shackle straps or item # MR26ZR for 3-1/8" long shackle straps. You'll want to measure from the mounting holes of one of your shackle straps and go with whatever kit is closest.
I attached some diagrams below so you can see what exactly you'll need to measure.
The MORryde item # MR33WR is going to be the correct X-Factor Crossmember since you have and are just replacing MORryde CRE3000 equalizers. You can add up to four with a triple axle trailer. All mounting hardware necessary for installation is included.
How did you determine the 6-Leaf Double-Eye Spring item # TRU52FR is the correct replacement for your current leaf springs?
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 7000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 25-1/4 Inch Long
- Standard Grade
- EMCO
more information >
Continue Researching
- Video: Review of Lippert Replacement ABS Sensor 10 Inch Electric Brake Full Axle - LC68FC
- Shop: Replacement ABS Sensor for Lippert ABS System - 12" Brake - One Axle End
- Shop: Replacement ABS Sensor for Lippert ABS System - 10" Brake - Full Axle
- Shop: Electric Trailer Brake Assembly for Lippert ABS Hubs - 12" - Left/Right Hand - 5.2K - 7K
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Shop: Kodiak Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8K - Oil - Dexter
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Replacement Leaf Springs for 2021 Keystone Raptor Toy Hauler
- Q&A: Replacement Leaf Spring for 7k Axle that is 25-1/4 inch
- Q&A: Availability of 7k Trailer Axle Leaf Spring that is 25-1/4 inches Long
- Q&A: Upgraded Suspension Parts for 2020 Grand Design Reflection 320MKS
- Q&A: Does the Band Around the Spring Pack Go Forward When Installing Leaf Springs?
- Q&A: Replacement 26" Leaf Spring Recommendation for 6K Axles on a 2017 Jayco Eagle
- Q&A: Will 8k Leaf Springs Lift Trailer With 7k Axles
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
Hugo H.
2/5/2026
Hi Lance, 6 leaf leaf springs work great, depending on the weight capacity of your axels, 7,8k axels. I used them on 5th wheels and heavy dump trailer. Customers are very happy with the change, b4 I was replacing leaf springs almost every 6 months. Now with the 6 leaf springs they can use they’re trailers a lil longer.