Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When old suspension parts start to sag or bounce, this 4-leaf double-eye spring brings back the steady ride your trailer had when new. Designed for a 4,400-lb axle, it flexes with the road to absorb shock and keep things level over rough surfaces. Each spring has a 2,200-lb capacity and measures 25-1/4" from eye to eye when unloaded, giving you the right balance of strength and travel for consistent performance.
Rough roads and heavy loads put a lot of strain on your suspension. This spring is made from sturdy steel with four leaves stacked for strength and flexibility. It holds its shape under weight yet moves enough to cushion bumps, reducing wear and tear on your frame and cargo.
No one wants a noisy suspension. The included nylon bushings, sized with a 9/16" inner diameter, let the spring pivot smoothly on the hangers and shackles so movement stays controlled and quiet. That small bit of give helps eliminate metal-on-metal wear and keeps the ride comfortable.
This spring mounts to hangers welded on the frame—one end fixed, the other connected through shackle straps or an equalizer. The 1-3/4" width and 11/16" eye diameter without bushings match standard suspension hardware, making it an easy replacement or upgrade. For best alignment and even wear, always replace springs in pairs so both sides of the axle share the same travel and load.
| Part Number | A | B | C | D |
|---|---|---|---|---|
| 072-078-00 | 13" | - | 25-1/4" | 3-1/8" |
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Delivered to Guam and got to fully restored my boat trailer for a fraction of what could have cost me on island. Perfect choice
The service was terrific! My wife and I headset out on the road for a cross-country trip and after 400 miles I found I had a broken spring and it was Labor Day weekend also. You guys got that spring to me very quickly and I was able to get back on my way. By the way, I bought an extra one for the next time lol. Again thank you so much!
Very nice looking leaf springs, although being a Dexter product I would have thought they were made in USA, a little disappointed they are not, I will be installing on my 20’ enclosed trailer
I had purchased 4 of the DX23CR Springs to replace the OEM springs on my Grand Design Imagine XLS 22MLE. The springs were a direct replacement, however I have the MORyde CRE3000 with a wet bolt kit installed. When I removed the nylon bushing to install the bronze bushings for the wet bolts, the bronze bushings fell right thru the hole in the spring eyelets. Eyelets were to large.
I returned the 4 springs and Etrailer sent me out Four more, they had the same issue.
Etrailer was awesome as far as the returns were a breeze.
Still on search for a spring with the proper eyelet hole dimensions
This 8000# axle leaf spring is one of seven. Six of them on the trailer, and one as a spare. I upgraded from the 7000# leaf spring to the 8000# leaf spring. Keeps my 18,0000lb toyhauler from sagging. A great upgrade. Also might consider the upgrade on wet bolts and thicker shackles. You won't regret it.
These came quick. I haven't had a chance to pull it far down the road but it was a great replacement for the single leaf springs that tracker used on their trailers for the tahoe t16 boats. The shackle strap kit that I used with these worked great as well, however, there was slack in the bushing. It is supposed to be a 9/16" eye in the spring and the shackle kit was 9/16" as well. I went ahead and put it together so hopefully that doesn't come back on me to have to replace prematurely. I will know more later down the road.
We have a new micro-camper trailer, out of the factory weighing 600 pounds. I added 600 pounds of equipment, still well below the limits of the 2000 axle and 1000 pound (each) 3-leaf springs. However, after a little towing on rough highways, the springs were deforming and bottoming out on the frame. I swapped them out with these 4-leaf 1400 pound springs. Now all is good!
Priced reasonable, guidance for selecting the right parts was spot on and they were easy to install with online assistance. Looking forward to taking them on the road to see the difference they make to the ride of our RV.
It took a day longer to arrive than I was told
The support staff is incredible in helping identify the correct part and in follow-up! Great experience in ordering a needed part on the road.
Received item damaged. Leaf springs hanging out of the box. Pretty sad shipping job. They look like they can still be used but at 250$ you would think they would have been packaged much better. Brand new items and they look like they came off someone else trailer.
Was exactly what I ordered and was delivered on time with a very reasonable price.
Direct replacement for the original
Easy installation. Fit perfectly.
Leaf springs arrived in a very timely fashion. They were exactly what I ordered and installing them went very smooth and they fit perfect.
Perfect fit. Exact fit especially since the original manufacturer is out of business. Super help finding the replacement via chat. Thank you so much. Also they had it at my door in less than 72 hours. This is a picture of what was broken!
Installed 4 new springs, Moryde equalizer and wet bolt kit onto 17 Imagine 2800 BH camper. Total time was 5 hours including blocking up the camper and clean up.
No fitment issues. Ride height increased by 1 inch.
Quality Dexter springs.
Lazer S.
10/14/2025
Install looks great, Christopher! This is an upgrade a lot of people are doing lately and it will be a big improvement from what you originally had installed! Any more trips planned for the year or are you getting everything ready for next season?
Do you have a question about this Trailer Leaf Spring?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
3/19/2025
Yeah, that is definitely not a break the spring could bounce back from. So glad we had what you needed to get back up and running again!