Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This spacer kit is designed to adapt your Timbren suspension enhancement system (TORTTN) to your lifted vehicle. Includes (2) 1" rubber spacers, (2) 1/2" rubber spacers, and all necessary hardware.
Features:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, I'm gonna take a look at this Spacer Kit for the Timbren Suspension Enhancement System. Now this spacer kit is designed to adapt your Timbren Suspension Enhancement System to your lifted vehicle. Now, this kit will include everything laid out here on the table. It'll include two of the one inch thick rubber spacers, two of the 1/2 thick rubber spacers, does include the bolts, and there's three different size bolts.
You got two of the 2 3/8 inch long bolts, two of the 2 9/16 long bolts, and two of the 3 1/8 size long bolts. It does come with a nice set of instructions that'll describe how these install. But basically, to determine if you need this spacer kit for your application, What you'll do is measure between the frame of your trunk when it's empty and the rear leaf spring. And this spacer kit is required for measurements that'll measure between six inches and 7 1/2 inches. This will help fill the space between your suspension system and the lifted frame.
Now, you can mix and match the spacer sizes to fit your vehicle, but you wanna make sure to use the correct length bolt for the correct spacers or spacers that are gonna be used. So basically, if you're just gonna use the 1/2 inch thick spacers, what you'll want to do is use the smaller 2 3/8 inch long bolts. If you're gonna use the two one inch size spacers, you'll use the 2 9/16 long bolts. And then if you're gonna use a one inch and a 1/2 inch one combined, then you'll use the longer bolts which are the 3 1/8 inch long bolts. But that should do it for the review on this Spacer Kit for the Timbren Suspension Enhancement System..
Average Customer Rating: 4.3 out of 5 stars (63 Customer Reviews)
This spacer kit is designed to adapt your Timbren suspension enhancement system (TORTTN) to your lifted vehicle. Includes (2) 1" rubber spacers, (2) 1/2" rubber spacers, and all necessary hardware.
Bought these for my 13 toyota tundra with spacer kit because of the lift, used them for hauling my camper, did not need weight distribution bar anymore pulled good, also use this for my 7x14 dump trailer hauling gravel made a big difference, dump trailer weighs 4400lbs and would haul 3yards of rock regularly
07Dodge 3500 MegaCab 6.7L Cummins(9000LBs+)
I had been having problems with both the factory bump stops and replacement stops lasting for any longer than a year or two. They would completely come off from just daily on/road use. Replaced them with the Timbren stops and my ride has been the best it’s ever been since I have had the truck. On road or off didn’t matter. Has done particularly well this winter off/road while working on a construction site. No bottoming out or heavy swaying while hitting those ruts and bumps onsite. The truck was lifted 6” and I had to get spacers which I forgot but etrailer sent them very quickly and I installed them with very little effort. Was surprised how little time it actually took me. Didn’t have a lift so had to use jacks which took up the most time on the install. I’ve had them on for a year now and would say it’s one of the best products I've ever put on my truck. Wish I had done it years ago.
Bolts supplied in spacer kit were wrong threads - Not compatible with Timbrens..Threads on the Timbren brackets had to be chased with thread dye. Package arrived 3 days later than stated - To late for planned when’d trip. I think 3 stars is very generous - Only gave 3 stars because of information provided by etrailer along with reviews & videos.
Arrived a day sooner than expected. Took about an hour to install. Left side a little bit harder. Just like video said. Haven’t hooked trailer yet but looking forward to it. Very pleased. Have used on 2 trucks in the past and was very pleased with how it preformed
The spacer kit fits perfectly and is exactly what we needed to get the truck sitting right.
Good product so far and fast shipping.
Mounting was a snap. Left 1/2 inch gap and did the trick. Delivered fast and complete.
They caused my metal pads to rust did not like that hell water
I paid extra shipping to receive it before I needed to haul my boat to Lake Powell. It didn’t show up until the day the free shipping date was. So I had to have my friend tow it for me.
When combined with the Timbren suspension enhancement system the supplied bolts are not long enough.
This is a really great product I definitely will be ordering again. I have a 2016 Nissan Titan XD with a 5 L Cummins turbo diesel and these thing came quickly and just in time for me to hook up that 40 foot gooseneck and hit the road and to believe I almost bought airbags.
Fast shipping,great price, and great product. I will definitely order from here again!
I think the timbren where the best choice for keeping the sag down on my truck while pulling my camper I didn’t want to deal with inflating and deflating air bags all the time so the timbren seemed like a better choice they work well for me and thanks to etrailer for there great customer service and fast shipping and prices
excellent customer service, and the product was spot on from the details that were given.
I never have a bad experience with an order from etrailer. Be sure to book mark this site as an Rv person with a large truck, they always have what I need.
Product was previously used with obvious wear and came with metric threaded bolts that did not fit the sae thread on the welded nut. Would have returned but I needed it for an upcoming trip.
Jenny N.
6/16/2023
I am not sure as to what happened as the products that we carry are new. I will still have our Customer Service team reach out to you.
Fast shipping and very god prices
Product work great . Just what was need on truck . Etrailer is the best place to buy them plus they were very helpful . Would definitely buy again
Exactly what I ordered, arrived a day earlier than expected. Typically, in my experience Timbrens leave too much gap so I added a 1in and a 1/2in spacer to reduce the gap from 2 inches down to a 1/2 gap.
The gap is going to be your first sag plus the compression of the Timbrens which also can be up to a 2 inch compression depending on your load weight. By adding the spacers you can reduce your total sag.
I reduced my sag from 4-1/4” inches down to about under 2 inches which is a big difference.
So I recently had two product purchases from etrailer, my Timbren load suspension upgrade and my truck bed camper frame mounted hold-downs, both to be installed on my 2016 3500 Ram. The installation and performance of both of these products went very well. I received great phone support from etrailer operators, as my buddy and I have in the past. It was my buddie Mikie who originally recommended your Company from numerous purchases he has made with you.
Great Company!
The kit was exactly what I need. It arrived ontime and the tech support at etrailer were very helpful.
Great product
Very timely delivery and the product was the best price I could find it.
Purchased in order to haul a 44’ fifth wheel with my one ton Chevy. No sway and no sagging. The ride was a little stiff but I expected that. Excellent product that took less than 45 minutes to install.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tony
8/22/2024
very happy with the product